Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions

91
Main menu:These menus are always displayed on the SETUP MENU.
Live image:Live images from the camera channel that was selected just before the SETUP MENU was displayed.
Main area:The setting items of the selected submenu will be displayed in this area.
Submenu:The submenu of the selected main menu will be displayed on the left side of the SETUP MENU. The submenus dif-
fer depending on the selected main menu.
■About the SETUP MENU
REC Rate
Disk Info
Version Info
Disk End Mode
Disk Capacity
Date Delete...

92
zPress the SETUP/ESC button for 2 seconds or more
when displaying live images.
[Screenshot 1]
The top page of the SETUP MENU will be displayed.
xSelect a main menu using the arrows button and press
the SET button.
[Screenshot 2]
The submenu of the selected main menu will be displayed.
cSelect the submenu using the arrows button (CD) and
the press the SET button.
When selecting the submenu by the cursor is enabled,
press the SETUP/ESC button. The main menu can be
selected.
[Screenshot 3]
The setting...

93
Perform the settings for the hard disk drives.
It is possible to check the histories (log) of event occur-
rence, error occurrence and access.
q[REC Rate] Check the recording rate and the
image quality for each camera channel.
Recording rate for each recording mode for each cam-
era (as shown below) will be displayed in list form.
MANU:Manual recording
SCHE:Schedule recording
PRE EVT:Pre-event recording
POST EVT:Post-event recording
EMR:Emergency recording
w[Disk Info] Check the available hard disk...

94
r[Disk End Mode] Set actions to be taken when
the available hard disk space has run out
Select an action from the followings to be taken when
the available space of the built-in hard disk (normal
recording area, event recording area, copy area) or the
external recording device (DVD-RAM, CD-R or DVD-R
disk drive) connected to the copy port (COPY1,
COPY2) is running out.
CONTINUE:When the available disk space has run
out, old data will be overwritten by new data. In this
case, the oldest data is the...

95
u[Event Log] Check the event log
Event log (time and date at an event occurrence,
details) will be displayed in list form.
Refer to page 45 for further information about each
event.
COM:Command alarm
EMR:Emergency recording
LOSS:Video loss
TRM:Terminal alarm
VMD:Motion detection
Note:Up to 750 event logs can be kept. When more
than 750 event logs are filed, old event log will be
overwritten by new event log. In this case, the old-
est log is the first to be overwritten.
i[Error Log] Check the error...

SMART X-Y X indicates the unit/unit number that
has the hard disk error
Y indicates the unit/unit numberHDD SMART error
96
o[Access Log] Check the access log
The time, user name and IP addresses when logging
in/out to/from this unit will be displayed in list form.
**IN:The user name or the IP address displayed before
IN indicates the user/host logged in.
**OUT:The user name or the IP address displayed
before OUT indicates the user/host logged out.
**: A user name (first 15 characters) or host name will...

97
Perform the settings for the basic recording (REC Setup)
and the emergency recording.
q[REC Setup] Perform the settings for the basic
recording.
Perform the following settings for the basic recording.
•[Recording]
Select ON or OFF to record or not record.
ON:Recording will be performed.
OFF:No recording will be performed.
Important:
When OFF is selected for this setting, no recordings will
be performed. Select ON for normal use except when it
is necessary to stop recording forcefully such as when...

98
•[Audio Allocation]
Allocates audio from the audio input connectors (1 - 4)
on the rear panel of the unit to camera channels.
Allocate audio in accordance with channels of connect-
ed cameras. When OFF is selected, audio will not be
heard.
Important:
•When a live image from the audio assigned camera
channel is displayed on a single screen on monitor 2,
audio will be heard. When displaying on a multi-screen,
audio will not be heard.
•When images from the audio assigned camera channel
are displayed on a...

99
Perform the settings for event actions of each event type
(motion detection, video loss, command alarm and terminal
alarm).
q[Event Setup] Settings for the alarm output
duration and the buzzer duration
Perform the settings for the alarm output duration and
the buzzer sound duration for each event type (motion
detection, video loss, command alarm and terminal
alarm).
The following are available for the alarm output dura-
tion.
When OFF is selected, the alarm output will not be sup-
plied.
(s: second,...

100
zRotate the jog dial to select ON for a desired camera
channel for which the motion detection function is to be
applied, and press the SET button.
[Screenshot 2]
The VMD Setup window will be displayed.
xRotate the jog dial to select SETUP AREA on the status
bar.
Note:To set all areas on the monitor as the motion
detection area, select ALL AREAS and press the
SET button.
[Screenshot 3]
The cross cursor will be displayed on the VMD Setup win-
dow.
cMove the cross cursor to a desired point to be set as...