Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions

51
bMove the cursor to Manual Delete for Normal
Recording Area or Manual Delete for Event
Recording Area using the arrows button, and
set time and date using the jog dial.
The images recorded the day before the set time and date
will be subject to be deleted.
nMove the cursor to DELETE using the arrows
button and press the SET button.
The confirmation dialog window will be displayed.
mSelect OK using the arrows button and press
the SETUP/ESC button.
To not delete, select CANCEL. 
,Press the SET button...

52
FORMAT (INITIALIZE) A DVD-RAM DISK
To copy (duplicate) recorded images onto the DVD-RAM
disk, formatting (initializing) the DVD-RAM disk is required
in advance.
To delete images recorded on the DVD-RAM disk, format-
ting (initialization) of the DVD-RAM disk is also required.
Important:
All data on the disk will be deleted if formatted (initial-
ized). It is impossible to recover the deleted images.
zPress the ESC/SETUP button for 2 seconds or
more.
The SETUP MENU will be displayed on monitor 2 and...

53
nPress the SET button to select FORMAT. 
The confirmation dialog window will be displayed.
mMove the cursor to OK using the arrows but-
ton and press the SET button to start format-
ting.
To stop formatting, select CANCEL and press the SET but-
ton.
During formatting, the status window will be displayed.
The status window will be closed automatically after com-
pleting formatting.
,Press the SETUP/ESC button to close the
SETUP MENU window.
Live images will be displayed on monitor 2 and the VGA...

54
DISPLAY/EDIT TEXT INFORMATION
It is possible to attach text information to images when
recording.
Entering 20 characters for a line (up to 10 lines, with a total
of 200 characters) is possible.
These are the descriptions of how to display/edit the
attached text information for images.
Note:Displaying/editing text information is possible during
the following.
•While pausing playback on a single screen
•While displaying the recording event list window
z
Press the PLAY/PAUSE button to stop play-
back....

55
bEdit text information using the arrows button
and the jog dial.
•To insert a character
Move the cursor to a desired point where a character is
to be inserted using the arrows button, and select a
character using the jog dial.
•To delete a character
Move the cursor to a character to be deleted using the
arrows button, and press the STOP button.
•To delete all characters
Press the STOP button for 2 seconds or more.
•Available characters
The following characters can be entered:
A B C D E F G H I J K L M...

56
Press the ALARM RESET button to can-
cel the error or the warning status.
Initialize the DVD-RAM disk. (Refer to
page 52.) When initialized, all recorded
data will be deleted.
Press the ALARM RESET button to can-
cel the error or the warning status.
Replace the disk with new one. The DVD-RAM disk is almost full or com-
pletely full.
The CD-R or DVD-R disk is almost full or
completely full. #-nn% (available
disk space is run-
ning out)
#-FULL (no avail-
able disk space)Error
WarningThe hard disk is...

57
Indication
The warning status will be canceled
automatically after around 10 minutes of
recovery. Contact the dealer. MEDIUM-n
REMOVE
FANWarning
Error
WarningPress the ALARM RESET button to can-
cel the warning status. Confirm that a
disk has been inserted, or check the
inserted disk format.
Press the ALARM RESET button to can-
cel the error status. Contact the dealer. The external recording device is not
operable because no disk or different
format disk has been inserted, etc.
An error has occurred...

58
OPERATION USING A SYSTEM CONTROLLER
It is possible to operate this unit using a PS·Data compatible system controller.
The following are the descriptions of how to operate this unit using the system controller WV-CU360C.
To operate this unit using a PS·Data compatible system controller, perform the required settings in advance. Refer to a system
administrator for further information.
Note:To perform the operation with buttons with the shadowed background ( ), press the SHIFT button of the system con-...

59
PLAYPAUSE
REV
–+
FWDRotate
the shut-
tle ring
Rotate
the shut-
tle ring During
playback
REV
–+
FWDRotate
the shut-
tle ring
Rotate
the shut-
tle ring
Rotate
the shut-
tle ring
Rotate
the shut-
tle ring
Rotate
the shut-
tle ring
Rotate
the shut-
tle ring
During
playback
REV
–+
FWD
During
playback
REV
–+
FWD
During
playback
REV
–+
FWD
During
playback
REV
–+
FWD
During
playback
REV
–+
FWD
During
playback
REV
–+
FWD
REV
–+
FWD
REV
–+
FWD
REV
–+
FWD
REV
–+
FWD
REV
–+
FWD
REV
–+
FWD
Rotate
the shut-
tle...

60
Available only during pause Skip to the next frame
Available only during pause Skip to the previous
frame
The point to be skipped to will be different
between normal playback and filtered play-
back. Skip forward
The point to be skipped to will be different
between normal playback and filtered play-
back. Skip backward
Available only during playback Mark start point for the
A - B repeat playback
Available only during playback Mark end point for the
A - B repeat playback
Available only during playback...