Home
>
Panasonic
>
Recording Equipment
>
Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions
Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions
Here you can view all the pages of manual Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 11
11 !1PS·Data Ports (DATA) Connect PS·Data compatible devices with these ports. !2Mode Switches (MODE) Set the operation mode of this unit with these dip switches. !3RS485 Ports (RS485 (CAMERA)) Connect RS485 compatible combination cameras with these ports. !4Network Port (10/100BASE-T) Connect this unit to a network compatible with 10BASE- T or 100BASE-Tx when controlling this unit using a PC via a network. !5Copy Port (COPY1) Connect a recommended DVD-RAM drive, CD-R drive or DVD-R drive with this...
Page 12
12 ■ On the Monitor 2 (To display live or recorded image) Notes: •Same images displayed on monitor 2 will be displayed on the VGA monitor. •The camera title will be displayed with 16 characters (2 lines: 8 characters per line). Important: •Since the VGA output from this unit is the same as for televisions (720 H x 480 V pixels/vertical frequency of 59.94 Hz), it may be possible that both the left and right edges can not be fit onto the screen depending on the VGA monitor. •It is impossible to use the...
Page 13
Delete Search Indicates that searching is currently being performed : Currently searching 13 ● Status on the Task Bar • On the Main Bar q Status Display Area w Copy/Delete Iconse Live/Playback Time Display Area r Alarm Display Areat Error Display Area Recording Indicated Item Status Indication qStatus Display Area Live PlaybackIndicates live image display status Indicates that playback is currently being performed with the displayed playback speed: Live image is displayed : Live images are displayed...
Page 14
tError Display Area Indicated Item Status Indication Error Warning Indicates an error occurrence or warning ALT-*:Alteration is detected W-ERROR:Failed to write data on the HDD SMART:Warning of the HDD malfunction H-METER:Set time for hour-meter (active time of the HDD) warning has passed THERMAL:The temperature inside the unit is too high POWER: A power outage has been detected #-nn%:Warning about running out of disk space while displaying available disk space per- centage #-FULL:No available disk...
Page 15
Indicates the available disk space of each partition. Top:100 % of the disk space is used (no avail- able disk space) Second from the top:80 % of the disk space is used Center:60 % of the disk space is used Second from the bottom:40 % of the disk space is used Bottom:20 % of the disk space is used Note:When CONTINUE is selected on the Termination page of the Maintenance setup menu, available disk space will not be displayed. Refer to a system administrator for further infor- mation. NML:Available disk...
Page 16
16 zInsert the power plug to an outlet (AC 120 V, 60 Hz) Note:Make sure the power source is AC 120 V, 60 Hz. xTurn on the power switch on the rear panel. The OPERATE indicator will light and the system check (checking the system and hard disk) will start. The startup splash image below will be displayed on moni- tor 2 and the VGA monitor during the system check. When the auto login is off, the login window will be dis- played if any button on the front panel of this unit is pressed after the system...
Page 17
17 CLOCK ADJUSTMENT It is recommended to check the clock periodically and put the clock right if it shows the wrong time. Adjust the clock when displaying a live image. zPress the SETUP/ESC button for 2 seconds or more. The SETUP MENU will be displayed on monitor 2 and the VGA monitor. xMove the cursor to System using the arrows button ( CDAB) and press the SET button. cMove the cursor to Time & Date using the arrows button ( CD), and press the SET but- ton. The Time & Date menu will be displayed. vMove...
Page 18
18 SHUTDOWN To shutdown the unit, do the following. When recording is being performed, press the REC button for 2 or more seconds. Recording will stop and the indica- tor on the REC button will go off. When playback is being performed, press the STOP button. Playback will stop and the indicator on the PLAY/PAUSE button will go off. Turn off the power of the unit after confirming that the HDD1 and HDD2 indicators are off. Important: •Detach the plug from the outlet if not operating the unit for a length...
Page 19
19 When recording with higher priority than manual recording is performed, manual recording will not be performed until this recording finishes. Refer to the following about the recording mode. xStop recording. Press the REC button down for around 2 seconds. The indicator on the button will go off and recording will stop. Notes: •The camera selection button will light orange (currently recording) or blue (currently being recorded and dis- played on the monitor) to indicate which camera is being...
Page 20
20 ● Recording Time Approximate possible recording durations will be as follows (with built-in HDD, manual recording): Recording with audio Unit: Hour EXA NQA FQA SFA Recording Rate [ips] (For Extended Recording) (Standard) (High Quality) (Highest Quality) 22 040 1 730 1 320 1 070 32 040 1 730 1 320 1 070 5680 570 440 1 070 61 270 950 630 470 7.5 680 570 440 350 10 510 430 330 260 15 400 340 260 210 30 200 170 130 100 60 60 50 40 30 Recording without audio Unit: Hour EXA NQA FQA SFA Recording Rate [ips]...