Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions

71
■ Connections with DVD-RAM, CD-R, and DVD-R drives
This is an example of connection when the unit is used together with the designated DVD-RAM, DVD-R and CD-R drive.
Connect the designated DVD-RAM, DVD-R and CD-R drive and the COPY1 port on the rear panel or the COPY2 port inside the
connectors cover on the front panel of this unit using an USB cable (not included).
Important:
•Use an appropriate USB cable compatible with the USB2.0 standard.
•Fix the cables with the cable clamp (provided with this...

72
■ Connections with the VCR
When it is necessary to copy the recorded images to a video tape using a VCR, connect the VCR to the S-VIDEO connector (or
the VIDEO OUT connector) and the AUDIO OUT connector inside the connectors cover on the front panel of this unit as below.
Note:The same video signal supplied to the MONITOR1 connector and to the MONITOR2 (VGA) connector will be supplied to
the S-VIDEO connector and the VIDEO OUT connector inside the connectors cover.
The same audio signal supplied to...

73
■ Connections with PS·Data systems
This is an example of connection when the unit is used together with the PS·Data devices.
If a connected system controller is PS·Data compatible, it is possible to operate this unit or connected devices using the sys-
tem controller.
Use the RS485 cable provided with the system controller.
Important:
•Terminate both devices on both ends of the connection. Refer to the respective operating instructions for the descriptions
of how to terminate. Termination of this unit...

74
● When this unit is connected with the system device (when this unit is used as a
controller)
POWER
ON
OFFALARM
Data Multiplex Unit WJ-MP204
ALARM
SUSPEND1234ESC SET RESETSUSPEND SET UPALARM UNIT 0987654321
System Controller
Controller
Termination: ON
Unit Address : 2RS485 cable
Mode switch
(No.8 : OFF)
Coaxial communication unit
Termination: ON
Unit Address : 1
1 2
IN
OUT
CASCADE
OUT
16 16 315 1514
1413
2 113
12 1211
1110
109
98
87
76
65
54
43
32
21
1VIDEO
AUDIO IN AUDIO OUTMONITOR OUT CASCADE...

75
■ Cascade connection of multiple units
Up to of four units can be connected.
For the cascade connection, connect the CASCADE IN connector and the CASCADE OUT connector on the rear panel of each
unit as below.
Important:
•When connecting the unit in the cascade connection, set Cascade of PS·Data Setup in Comm on the SETUP MENU to
ON. (Page 115)
•It is impossible to use this connector when connecting the unit in the cascade connection.
● When no PS·Data compatible device is connected to the system...

76
● When the PS·Data compatible device is connected to the first unit (when this unit
is used as a receiver)
12
IN
OUT
CASCADE
OUT
16 16
3
15
15
1414
132
1
13
1212
1111
1010
99
88
77
66
55
44
33
22
11
VIDEOAUDIO IN AUDIO OUTMONITOR OUT CASCADE INMONITOR (VGA) ALARM/CONTOROLSERIAL
ALARM
POWER COPY 1 MODE
EXT STORAGE 10/100BASE-T RS485(CAMERA)DATA
AC  IN
SIGNAL GND1
42
1
2
IN
OUT
CASCADE
OUT
16 16
3
15
15
1414
132
1
13
1212
1111
1010
99
88
77
66
55
44
33
22
11
VIDEOAUDIO IN AUDIO OUTMONITOR OUT CASCADE...

77
● When the PS·Data compatible device is connected to the third unit (when this unit
is used as a receiver)
1 2
IN
OUT
CASCADE
OUT
16 16 315 1514
1413
2 113
12 1211
1110
109
98
87
76
65
54
43
32
21
1VIDEO
AUDIO IN AUDIO OUTMONITOR OUT CASCADE INMONITOR (VGA) ALARM/CONTOROLSERIAL ALARMPOWER COPY 1 MODEEXT STORAGE 10/100BASE-T RS485(CAMERA)DATA
AC  IN
SIGNAL GND1
42
1 2
IN
OUT
CASCADE
OUT
16 16 315 1514
1413
2 113
12 1211
1110
109
98
87
76
65
54
43
32
21
1VIDEO
AUDIO IN AUDIO OUTMONITOR OUT CASCADE...

78
● When the PS·Data compatible devices are connected to the first and third units
(when this unit is used as a receiver)
12
IN
OUT
CASCADE
OUT
16 16
3
15
15
1414
132
1
13
1212
1111
1010
99
88
77
66
55
44
33
22
11
VIDEOAUDIO IN AUDIO OUTMONITOR OUT CASCADE INMONITOR (VGA) ALARM/CONTOROLSERIAL
ALARM
POWER COPY 1 MODE
EXT STORAGE 10/100BASE-T RS485(CAMERA)DATA
AC  IN
SIGNAL GND1
42
1
2
IN
OUT
CASCADE
OUT
16 16
3
15
15
1414
132
1
13
1212
1111
1010
99
88
77
66
55
44
33
22
11
VIDEOAUDIO IN AUDIO OUTMONITOR...

79
■ Connection with the RS485 camera
This is an example of connection when the unit is used together with the RS485 devices.
Up to eight cameras can be connected using a single RS485 (CAMERA) port.
Important:
•Terminate both devices on both ends of the connection. Refer to the respective operating instructions for the descriptions
of how to terminate. Termination of this unit can be set with the mode switch on the rear panel.
•When connecting an RS485 camera, it is necessary to set each item of RS485...

80
● Daisy connection
Multiple cameras can be connected to the RS485 (CAMERA) port.
Example: When cameras 1 - 4 are connected to one of the RS485 (CAMERA) port and cameras 9 - 12 are connected to the
other RS485 (CAMERA) port.
1 2
IN
OUT
CASCADE
OUT
16 16 315 1514
1413
2 113
12 1211
1110
109
98
87
76
65
54
43
32
21
1VIDEO
AUDIO IN AUDIO OUTMONITOR OUT CASCADE INMONITOR (VGA) ALARM/CONTOROLSERIAL ALARMPOWER COPY 1 MODEEXT STORAGE 10/100BASE-T RS485(CAMERA)DATA
AC  IN
SIGNAL GND1
42
RS485 cable
Mode...