Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions

141
•When an ANSWER command is required
The unit sends back the status or data, as shown in the figure.
•About ACK code
After receiving an command from the PC, the unit sends back the ACK code to the PC in 20 ms or less.
[ACK] = Reception succeeded (ASCII code: 06H)
After the ACK code sending back and the command processing has completed, the unit sends back the response com-
mand to the PC.
Example:
These are examples for the following operations.
1. Login with the user name of ADMIN and with password...

142
•Parameter error
When the unit cannot properly process the received command, the unit sends back an error code to the PC. After clearing
the receive buffer, the unit enters the wait state until receiving the following [STX] command.
•If the unit receives another command during the response, the unit will respond to the command after processing the cur-
rent response. 
•If the unit received the [STX] command again before receiving the [ETX] command, the unit will clear the internal buffer.
Then, the...

143
1 2
IN
OUT
CASCADE
OUT
16 16 315 1514
1413
2 113
12 1211
1110
109
98
87
76
65
54
43
32
21
1VIDEO
AUDIO IN AUDIO OUTMONITOR OUT CASCADE INMONITOR (VGA) ALARM/CONTOROLSERIAL ALARMPOWER COPY 1 MODEEXT STORAGE 10/100BASE-T RS485(CAMERA)DATAAC  IN
SIGNAL GND1
42
D-sub Pin 9
(Female)D-sub Pin 9
(Female)
This unitPersonal compute
Pin No. Signal Name I/O
1CDIN
2TXD IN
3RXD OUT
4DTR OUT
5SG–
6DSR IN
7RTS OUT
8CTS IN
9RIIN WJ-HD316 Rear View
51
96
7 (RTS)
8 (CTS)
3 (TXD)
5 (GND)
2 (RXD)7 (RTS)
8 (CTS)
3 (TXD)...

144
Basic Operation
Item
Forward a field
Rewind a field
Pause during playback
Play
Manual recording
Manual recording with
text
Stop
Skip & play forward
Skip&play reversely
Record No. Search and
playback
Time & date search and
playback
Record skip
LISTED Playback
Playback latest image
A - B repeat playback
Display COPY SETUP
MENU
Display text
Multi-screen switching
Monitor selection
Camera selection
Transmission command (ASCII)
OVF
OVR
OPA
OPL
ORC
ZMR:nn:ddd...
ddd
OSP:n
OSF:n
OSR:n...

145
Item
Start sequence
Stop sequence
Disk selection
Marking
Alarm Control
Item
Alarm input
Alarm input with text
Alarm reset
Alarm suspension
Alarm change information
(LED indication)
Alarm change information
Setup Control
Item
Display SETUP MENU
Transmission command (ASCII)
MSU:n
DCR:n1n2
TSU:yyyymmddhhnn
MST:n
MRM:n
Response command (ASCII)
MSU:n
DCR
TSU
MST
MRM
Parameter (ASCII)
n=0 SETUP MENU OFF
n=1 SETUP MENU ON
n1n2=A1 Right
n1n2=C1 Upward
n1n2=E1 Left
n1n2=G1 Downward
n1n2=+1 Increment parameter...

146
Data Control
Item
Copy by specifying
record
Copy by specifying date
& time
Data copy completed
Cancel data copy
Erase log
Log data total number
inquiry
Log readout
Record list acquisition
Text acquisition
Text writing
Disk End Notification
Item
Disk end auto-notification
setting
Disk end auto-notification
Transmission command (ASCII)
MDE:n
HDE:–
Response command (ASCII)
MDE:n
HDE:p
Parameter (ASCII)
n=0 (Auto-notification OFF)
n=1 (Auto-notification ON)
p=1 (Normal recording sector)
p=2 (Event...

147
Search Operation
Item
Display search editing
area
Display Operation
Item
Switch display
Inquiry
Item
Additional disk space
inquiry
ID request
Interface ID request
Production category
request
Alarm information request
Software version inquiry
Status inquiry
Transmission command (ASCII)
Transmission command (ASCII)
QHR:p
QID
QIB
QIC
QLD:0
QRV
QSR DIN:n
Response command (ASCII)
Response command (ASCII)
QHR:p:sss
QID:WJ-HD309 
or 
QID:WJ-HD316
QIB:WJ-HD309 
or 
QIB:WJ-HD316
QIC:2
QLD:n
QRV:n.nn...

148
zqm: Monitor status: camera CH: Playback
time
Monitor status n=0 Live
n=1 Live sequence
n=2 Playback
n=3 Other statuses
Camera CH
Playback time: yyyymmddhhnnss
ztl:n Search editing area ON
n=0 Search editing area OFF
n=1 Recording event search list ON
n=2 Recording event search thumbnail
ON
n=3 VMD search list ON
n=4 VMD search thumbnail ON
n=5 Marking search list ON
n=6 Marking search thumbnail ON
n=7 Search playback display ON
zdt:0 Text display OFF
zdt:1 Text display ON
Recording mode inquiry...

149
Communication
Item
Communication check
Transmission command (ASCII)
RCK
Response command (ASCII)
RCK
Parameter (ASCII)
Record information
inquiryZGP:rrrrrrrrrrrrrrrr ZGP:rrrrrrrrrrrrrrrr:
ccc:q:nnnn:yyyymmdd
hhnnss:nnss:t:ssssssrrrrrrrrrrrrrrrr: Record number
ccc: Camera CH
q: picture quality (0 (Very Fine), 1 (Fine), 2
(Normal), 3 (Extended))
nnnn: Recording rate
yyyymmddhhnnss: Recording start date and
time
nnss: Recording total time
t=0 Text included
t=1 Text not included
ssssss: Record size [KB]...

150
FLOWCHART OF THE SETUP MENU
Recording
Emergency REC
Recording
REC Setup Maintenance
REC Rate
Maintenance
Disk Info
Maintenance
Version info
Maintenance
Disk End Mode
Maintenance
Disk Capacity
Maintenance
Disk Delete
Maintenance
Error Log
Maintenance
Access Log Maintenance
Event LogEvent
Event SetupSchedule
Time Table
Maintenance
Monitor 1Display
OSD Setup
Comm
Camera ControlSystem
Basic Setup
System
Time & Date
System
User Regist.
System
User Edit
System
User Delete
System
Host Regist.
System
Host...