Home
>
Panasonic
>
Recording Equipment
>
Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions
Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions
Have a look at the manual Panasonic Digital Disk Recorders Wj Hd316 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 96
SMART X-Y X indicates the unit/unit number that
has the hard disk error
Y indicates the unit/unit numberHDD SMART error
96
o[Access Log] Check the access log
The time, user name and IP addresses when logging
in/out to/from this unit will be displayed in list form.
**IN:The user name or the IP address displayed before
IN indicates the user/host logged in.
**OUT:The user name or the IP address displayed
before OUT indicates the user/host logged out.
**: A user name (first 15 characters) or host name will...](http://img.usermanuals.tech/thumb/58/69449/w64_wj-hd316_en_om_d-95.png "Page 96
SMART X-Y X indicates the unit/unit number that
has the hard disk error
Y indicates the unit/unit numberHDD SMART error
96
o[Access Log] Check the access log
The time, user name and IP addresses when logging
in/out to/from this unit will be displayed in list form.
**IN:The user name or the IP address displayed before
IN indicates the user/host logged in.
**OUT:The user name or the IP address displayed
before OUT indicates the user/host logged out.
**: A user name (first 15 characters) or host name will...")
![Page 97
97
Perform the settings for the basic recording (REC Setup)
and the emergency recording.
q[REC Setup] Perform the settings for the basic
recording.
Perform the following settings for the basic recording.
•[Recording]
Select ON or OFF to record or not record.
ON:Recording will be performed.
OFF:No recording will be performed.
Important:
When OFF is selected for this setting, no recordings will
be performed. Select ON for normal use except when it
is necessary to stop recording forcefully such as when...](http://img.usermanuals.tech/thumb/58/69449/w64_wj-hd316_en_om_d-96.png "Page 97
97
Perform the settings for the basic recording (REC Setup)
and the emergency recording.
q[REC Setup] Perform the settings for the basic
recording.
Perform the following settings for the basic recording.
•[Recording]
Select ON or OFF to record or not record.
ON:Recording will be performed.
OFF:No recording will be performed.
Important:
When OFF is selected for this setting, no recordings will
be performed. Select ON for normal use except when it
is necessary to stop recording forcefully such as when...")
![Page 98
98
•[Audio Allocation]
Allocates audio from the audio input connectors (1 - 4)
on the rear panel of the unit to camera channels.
Allocate audio in accordance with channels of connect-
ed cameras. When OFF is selected, audio will not be
heard.
Important:
•When a live image from the audio assigned camera
channel is displayed on a single screen on monitor 2,
audio will be heard. When displaying on a multi-screen,
audio will not be heard.
•When images from the audio assigned camera channel
are displayed on a...](http://img.usermanuals.tech/thumb/58/69449/w64_wj-hd316_en_om_d-97.png "Page 98
98
•[Audio Allocation]
Allocates audio from the audio input connectors (1 - 4)
on the rear panel of the unit to camera channels.
Allocate audio in accordance with channels of connect-
ed cameras. When OFF is selected, audio will not be
heard.
Important:
•When a live image from the audio assigned camera
channel is displayed on a single screen on monitor 2,
audio will be heard. When displaying on a multi-screen,
audio will not be heard.
•When images from the audio assigned camera channel
are displayed on a...")
![Page 99
99
Perform the settings for event actions of each event type
(motion detection, video loss, command alarm and terminal
alarm).
q[Event Setup] Settings for the alarm output
duration and the buzzer duration
Perform the settings for the alarm output duration and
the buzzer sound duration for each event type (motion
detection, video loss, command alarm and terminal
alarm).
The following are available for the alarm output dura-
tion.
When OFF is selected, the alarm output will not be sup-
plied.
(s: second,...](http://img.usermanuals.tech/thumb/58/69449/w64_wj-hd316_en_om_d-98.png "Page 99
99
Perform the settings for event actions of each event type
(motion detection, video loss, command alarm and terminal
alarm).
q[Event Setup] Settings for the alarm output
duration and the buzzer duration
Perform the settings for the alarm output duration and
the buzzer sound duration for each event type (motion
detection, video loss, command alarm and terminal
alarm).
The following are available for the alarm output dura-
tion.
When OFF is selected, the alarm output will not be sup-
plied.
(s: second,...")
![Page 100
100
zRotate the jog dial to select ON for a desired camera
channel for which the motion detection function is to be
applied, and press the SET button.
[Screenshot 2]
The VMD Setup window will be displayed.
xRotate the jog dial to select SETUP AREA on the status
bar.
Note:To set all areas on the monitor as the motion
detection area, select ALL AREAS and press the
SET button.
[Screenshot 3]
The cross cursor will be displayed on the VMD Setup win-
dow.
cMove the cross cursor to a desired point to be set as...](http://img.usermanuals.tech/thumb/58/69449/w64_wj-hd316_en_om_d-99.png "Page 100
100
zRotate the jog dial to select ON for a desired camera
channel for which the motion detection function is to be
applied, and press the SET button.
[Screenshot 2]
The VMD Setup window will be displayed.
xRotate the jog dial to select SETUP AREA on the status
bar.
Note:To set all areas on the monitor as the motion
detection area, select ALL AREAS and press the
SET button.
[Screenshot 3]
The cross cursor will be displayed on the VMD Setup win-
dow.
cMove the cross cursor to a desired point to be set as...")
![Page 101
101
xMove the cross cursor onto an area to be deleted using
the arrows button and press the SET button.
cTo complete the settings, rotate the jog dial to select
EXIT on the status bar.
→The VMD Setup window will be closed.
●Set the sensitivity
Set the sensitivity for the created motion detection area.
Sensitivity can be set for each area.
[Screenshot 1]
Start operation from the VMD Setup window.
zRotate the jog dial to select SENSITIVITY on the status
bar.
[Screenshot 2]
The sensitivity of the selected...](http://img.usermanuals.tech/thumb/58/69449/w64_wj-hd316_en_om_d-100.png "Page 101
101
xMove the cross cursor onto an area to be deleted using
the arrows button and press the SET button.
cTo complete the settings, rotate the jog dial to select
EXIT on the status bar.
→The VMD Setup window will be closed.
●Set the sensitivity
Set the sensitivity for the created motion detection area.
Sensitivity can be set for each area.
[Screenshot 1]
Start operation from the VMD Setup window.
zRotate the jog dial to select SENSITIVITY on the status
bar.
[Screenshot 2]
The sensitivity of the selected...")
![Page 103
103
•[Alarm Auto Reset]
The following are possible for the alarm auto reset.
When OFF is selected, the alarm display will not auto-
matically disappear.
To erase the alarm display, press the ALARM RESET
button.
OFF/1 s - 30 s (in 1 second intervals)
40 s/50 s/1 m/2 m/3 m4 m/5 m
•[Alarm Disarm]
The following are possible for the alarm disarm.
2 s - 10 s (in 1 second intervals)
r[Terminal Setup] Perform the settings for the
alarm terminal polarity.
Select how to supply the signal to the alarm terminal....](http://img.usermanuals.tech/thumb/58/69449/w64_wj-hd316_en_om_d-102.png "Page 103
103
•[Alarm Auto Reset]
The following are possible for the alarm auto reset.
When OFF is selected, the alarm display will not auto-
matically disappear.
To erase the alarm display, press the ALARM RESET
button.
OFF/1 s - 30 s (in 1 second intervals)
40 s/50 s/1 m/2 m/3 m4 m/5 m
•[Alarm Disarm]
The following are possible for the alarm disarm.
2 s - 10 s (in 1 second intervals)
r[Terminal Setup] Perform the settings for the
alarm terminal polarity.
Select how to supply the signal to the alarm terminal....")
![Page 106
106
w[Event Program] Create event programs for an
event occurrence
Perform the settings of event action for each event type
(motion detection, video loss, terminal/command alarm)
or of auto copy.
● VMD
Perform the settings of event action at a motion detection or
the settings of the auto copy function.
Perform the settings for the following operation mode. Refer
to page 45 for further information about each operation
mode.
ACT DET (Activity Detection Mode):Performs only
recording, writing an event log...](http://img.usermanuals.tech/thumb/58/69449/w64_wj-hd316_en_om_d-105.png "Page 106
106
w[Event Program] Create event programs for an
event occurrence
Perform the settings of event action for each event type
(motion detection, video loss, terminal/command alarm)
or of auto copy.
● VMD
Perform the settings of event action at a motion detection or
the settings of the auto copy function.
Perform the settings for the following operation mode. Refer
to page 45 for further information about each operation
mode.
ACT DET (Activity Detection Mode):Performs only
recording, writing an event log...")
101 xMove the cross cursor onto an area to be deleted using the arrows button and press the SET button. cTo complete the settings, rotate the jog dial to select EXIT on the status bar. →The VMD Setup window will be closed. ●Set the sensitivity Set the sensitivity for the created motion detection area. Sensitivity can be set for each area. [Screenshot 1] Start operation from the VMD Setup window. zRotate the jog dial to select SENSITIVITY on the status bar. [Screenshot 2] The sensitivity of the selected detection area will be dis- played. xMove the cross cursor to select an area using the arrows button ( A B). cSelect the sensitivity for the selected area from the fol- lowing. OFF:No motion will be detected in this area. LOW:Low sensitivity MID:Standard sensitivity HIGH:High sensitivity vTo complete the settings, rotate the jog dial to select EXIT on the status bar, and press the SET button. →The VMD Setup window will be closed. ●Set the detection mode Perform the settings of the detection mode (method of detection) in the set detection area. Specifying a method of detection in a detection area is available by setting the detection mode. [Screenshot 1] Start operation from the VMD Setup window. zRotate the jog dial to select VMD MODE on the status bar. [Screenshot 2] The detection mode menu will be displayed. xSet the detection mode. Move the cursor to the desired detection mode using the arrows button ( AB). Move the cursor on the desired detection mode using the arrows button ( AB) and check the radio button next to the selected mode using the arrows button ( D C ). Refer to the following for further information about each of the detection modes. An event action will be performed according to the set- tings when motion is detected in any of the set motion detection areas. Move the cursor to an area for the settings of VECTOR using the arrows button ( B) and select an area using the arrows button ( DC). Move the cursor to the para- meter box of the selected area using the arrows button ( B) and rotate the jog dial to select an interval time for an object moving between each area from the follow- ing. --/5 s/10 s/20 s/30 s/40 s/50 s/1 m(min)
102 Move the cursor to the parameter box of each area using the arrows button ( B) and select a moving dura- tion for an object in each area from the following using the arrows button ( DC). --/5 s/10 s/20 s/30 s/40 s/50 s/1 m cTo complete the settings, rotate the jog dial to select EXIT on the status bar, and press the SET button. →The VMD Setup window will be closed. ●About the Detection mode Perform the settings of the detection mode (method of detection) in the set detection area. Specifying a method of detection in a detection area is available by setting the detection mode. There are three detection modes as follows. Important: Activating two or more detection modes simultaneously is not possible. An event action will be performed according to the set- tings when motion is detected in any of the set motion detection areas. Any motion will be detected anywhere in the A, B, C, D areas. An event action will be performed according to the set- tings when an object moves within the set time to the other detection area in the set order. The following is an example. Motion is detected in area B within 10 seconds after being detected in area A.Motion is detected in area C within 20 seconds after being detected in area B. Motion is detected in area D within 10 seconds after being detected in area C. When all of the above have occurred, an event action will be performed. An event action will be performed according to the set- tings when an object keeps moving for the set period in the detection area. For example, in case of the following settings; 10 sec. for the areas A and B, 20 sec. for area C and 30 sec. for area D: An event action will be performed when an object keeps moving for 10 seconds in area A or B, or for 20 seconds in area C, or for 30 seconds in area D. e[Alarm Setup] Perform the settings for the alarm auto reset and alarm disarm Perform the settings for the alarm display duration. The alarm display will automatically disappear when the dis- play duration has passed. (Alarm Auto Reset) Perform the settings to suspend the set duration when the same type of event (motion detection, video loss, terminal alarm, command alarm) has occurred sequen- tially so that the event action will not be performed each time. (Alarm Disarm) AB CD AB CD 10 s 10 s 20 s AB CD EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Event Setup VMD Setup Alarm Setup Terminal Setup OFF2s■ Alarm Auto Reset■ Alarm Disarm Time
103 •[Alarm Auto Reset] The following are possible for the alarm auto reset. When OFF is selected, the alarm display will not auto- matically disappear. To erase the alarm display, press the ALARM RESET button. OFF/1 s - 30 s (in 1 second intervals) 40 s/50 s/1 m/2 m/3 m4 m/5 m •[Alarm Disarm] The following are possible for the alarm disarm. 2 s - 10 s (in 1 second intervals) r[Terminal Setup] Perform the settings for the alarm terminal polarity. Select how to supply the signal to the alarm terminal. N.O.:Signals will be supplied when short-circuited. (Normally Open) N.C.:Signals will be supplied when open-circuited. (Normally Closed) Note:It is possible to set polarities for each of the alarm inputs 1-16 respectively using a PC via a network. EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Event Setup VMD Setup Alarm Setup Te r minal Setup N.O.■ Terminal Setup
Perform the settings for the recording schedules of record- ing and event action by designating a day of the week and time. A day can be divided into up to 6 time zones, and record- ing programs and event action programs can be assigned to each time zone to create a recording schedule. Up to 4 normal recording programs (REC Program) and up to 4 event action programs (Event Program) can be creat- ed. Perform the settings for the REC Program: resolution and recording rate. Perform the settings for the Event Program: action mode for each event type and auto copy. It is possible to create special days apart from the normal schedule, and a recording program of another day of the week can be switched to a special day’s program automati- cally. Flowchart how to create a schedule Follow the procedures below to create schedules. Create REC Program/Event Program. ( aPage 104 and 106) Create a timetable. ( aPage 106) Assign REC Program/Event Program to a timetable. ( aPage 106) q[REC Program] Create a recording program Perform the settings of resolution, and recording rate for each recording mode, and the recording rate and image quality of each camera channel. Up to 4 record- ing programs can be created. 104 ●[Resolution] Select a resolution for images to be recorded from the fol- lowing. FRAME 3D ON:High resolution (720 x 480) with the motion blur compensation FRAME 3D OFF:High resolution (720 x 480) FIELD:Standard resolution (720 x 480) SIF:Low resolution (360 x 240) Note:When FRAME 3D ON is selected, it is possible to record a moving object with less blurring. Important: In the following cases, recording will not be performed for around 4 seconds: •When resolution switched such in case that different resolution is set depending on different time zones •When the SETUP MENU is closed after changing the settings ●Recording Rate for Each Recording Mode Perform the settings of recording rate for each recording mode (manual recording, schedule recording and event recording). Assign the maximum recording rate according to the reso- lution for each recording mode. The following are the maximum recording rate for each res- olution. Resolution Maximum recording rate FRAME 3D ON 30 ips FRAME 3D OFF 30 ips FIELD 60 ips SIF 120 ips The following are available for the recording rate for each resolution. OFF/2 ips/3 ips/5 ips/6 ips/7.5 ips/10 ips/15 ips/30 ips/ 60 ips/120 ips Important: •When FRAME is selected for Resolution, 60 ips and 120 ips are not available. When FIELD is selected, 120 ips is not available. •The total recording rates for each recording mode must be less than the maximum recording rate of each reso- lution. Examples:When FIELD is selected and set, the total recording rates for each recording mode must be less than 60 ips. Manual recording: 15 ips Schedule recording: 15 ips Event recording: 30 ips ■[Schedule] Settings for the recording/event action schedule ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC Program Event Program Special DaysEvent SETUPSETUPSETUPSETUP ■ Recording Program 1■ Recording Program 2■ Recording Program 3■ Recording Program 4 EventSheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC ProgEvent Prog Special DaysMON TUE WED THU FRI SAT SUN EVERY EXT. 12AM 6AM 12PM 6PM 12AM REC:P1P2P3P4EVT:P1P2P3P4 ■ Resolution■ Recording Table Manual REC Schedule REC Event RECFIELD Recording Program 115ipsips 15ips 30 O KCANCEL 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFASFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFASFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFASFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ipsSCHEDULETIME TIMERATEQUALITYMANUAL PRE EVENT POST EVENT RATEQUALITYRATEQUALITYRATEQUALITYCAM1 CAM2 CAM3 CAM4 CAM5 CAM6 CAM7 CAM8 CAM9 CAM 10CAM11CAM12CAM13CAM14CAM15CAM16
105 ● Recording Rate and Image Quality for Each Camera Channel Perform the settings for recording rate, image quality and recording duration for each camera channel (only for event pre-recording and event post-recording). Perform the settings for each recording mode. Assign the recording rate for each camera channel as described in Recording Rate for Each Recording Mode above. The following are for the recording rate. When OFF is selected, images from the selected camera channel will not be recorded. OFF/0.1 ips/0.2 ips/0.3 ips/0.4 ips/0.5 ips/1 ips/2 ips/3 ips/5 ips/6 ips/7.5 ips/10 ips/15 ips/30 ips/60 ips AUTO:The recording rate will be set automatically. (Not possible for event pre-recording and event post-record- ing) Important: The total recording rates of each camera channels in the same recording mode must be less than the record- ing rate as described in Recording Rate for Each Recording Mode above. Examples:When selecting FIELD for resolution, 15 ips for manual recording, 15 ips for schedule recording, 30 ips for event recording: Total recording rates of CAM 1 - 16 (manual recording): less than 15 ips Total recording rates of CAM 1 - 16 (schedule record- ing): less than 15 ips Total recording rates of CAM 1 - 16 (event recording): less than 30 ips When the total of the recording rates becomes more than the set value, the recording mode table will turn red. The total recording rates between recording rates of event pre-recording and recording rates of event post-recording for each camera channel must be less than the recording rate as described in Recording Rate for Each Recording Mode above.The following are available for the image quality. SFA/SFB:Top quality (SUPER FINE) FQA/FQB:High quality (FINE) NQA/NQB:Standard quality (NORMAL) EXA/EXB:Low quality (EXTENDED) **A is suitable for less dynamic images. **B is suitable for more dynamic images. The following are available for the recording duration (only event pre-recording and event post-recording). 1 s - 10 s (in 1 second intervals) 20 s/30 s/1 - 10 m (in 1 minute intervals) 20 - 60 m (in 10 minutes intervals) MAN. (MANUAL):The recording duration will be as follows depending on the event type. •At a motion detection: For 8 seconds •At a video loss occurrence: During a video loss occur- rence •At a terminal alarm occurrence: During the supply of a signal •At a command alarm: For 8 seconds CON. (CONTINUE):Recording will be performed continu- ously until the ALARM RESET button is pressed. Notes: •When performing event pre-recording from a camera channel that does not have its own event pre-recording area, recording time of pre-recording will differ depend- ing on the settings of Resolution and Recording Rate and Quality for event pre-recording. When the set recording time is longer than the maximum possible recording time, recording rate of pre-recording will be displayed in red. •When performing event pre-recording from a camera channel that has its own event pre-recording area, recording time of pre-recording will differ depending on the capacity of recording area, the setting of Resolution and Recording Rate and Quality for event pre-recording. When the set recording time is longer than the maximum possible recording time, recording rate of pre-recording will be displayed in red. Refer to page 135 for further information about pre-recording area. Important: Event pre- recording image only just recorded will be delet- ed in the following cases: •When the SETUP MENU is closed after changing the settings •When event post-recording is performed newly •When time zone of a schedule switched and recording started newly •When date is been changed EventSheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC ProgEvent Prog Special DaysMON TUE WED THU FRI SAT SUN EVERY EXT. 12AM 6AM 12PM 6PM 12AM REC:P1P2P3P4EVT:P1P2P3P4 ■ Resolution■ Recording Table Manual REC Schedule REC Event RECFIELD Recording Program 115ipsips 15ips 30 O KCANCEL 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFASFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFASFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFASFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA SFA 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s 5s30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s 30s AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO AUTO1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ips 1ipsSCHEDULETIME TIMERATEQUALITYMANUAL PRE EVENT POST EVENT RATEQUALITYRATEQUALITYRATEQUALITYCAM1 CAM2 CAM3 CAM4 CAM5 CAM6 CAM7 CAM8 CAM9 CAM 10CAM11CAM12CAM13CAM14CAM15CAM16
106 w[Event Program] Create event programs for an event occurrence Perform the settings of event action for each event type (motion detection, video loss, terminal/command alarm) or of auto copy. ● VMD Perform the settings of event action at a motion detection or the settings of the auto copy function. Perform the settings for the following operation mode. Refer to page 45 for further information about each operation mode. ACT DET (Activity Detection Mode):Performs only recording, writing an event log and camera movement to a preset position at an event occurrence. Other event actions will not be performed. ALARM (Alarm Mode):Performs every event action according to the settings. Auto copy is the function to copy recorded images auto- matically onto the copy area of the hard disk or the DVD- RAM disk. Select ON or OFF to enable or disable the auto copy func- tion. ON:Enable the auto copy function OFF:Disable the auto copy function Important: •When OFF is selected for Auto Copy of Basic Setup on System, the auto copy function will not work even though ON is selected for this setting. Select HDD, COPY 1 or COPY 2 for Auto Copy. •Images recorded (by event pre-recording) in the pre- recording area on the hard disk will not be copied auto- matically. ● Video Loss Perform the settings of event action at a video loss or the settings of the auto copy function. The contents to be set are the same as the settings for VMD above. ● Terminal/command alarm Perform the settings of event action at a terminal/command alarm occurrence or the settings of the auto copy function. The contents to be set are the same as the settings for VMD above. e[Time Table] Assignment of REC Program and Event Program after setting the time zone Create recording timetables for each day of the week, and assign REC Program and Event Program to each timetable. Up to 6 recording programs can be created. Do the following to create timetables. ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC Program Event Program Special DaysEvent SETUPSETUPSETUPSETUP ■ Event Program 1■ Event Program 2■ Event Program 3■ Event Program 4■ Operation Mode■ Auto Copy Terminal/Command Alarm OK ALARMOFF CANCEL ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC Program Event Program Special DaysEvent MON TUE WED THU FRI SAT SUN DAILY EXT12AM 6AM 12PM 6PM 12AM RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4 ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC Program Event Program Special DaysEvent SETUPSETUPSETUPSETUP ■ Event Program 1■ Event Program 2■ Event Program 3■ Event Program 4■ Operation Mode■ Auto Copy Video Loss OK ALARMOFF CANCEL ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC Program Event Program Special DaysEvent SETUPSETUPSETUPSETUP ■ Recording Program 1■ Recording Program 2■ Recording Program 3■ Recording Program 4 ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC Program Event Program Special DaysEvent SETUPSETUPSETUPSETUP ■ Event Program 1■ Event Program 2■ Event Program 3■ Event Action 4Event Program 1■ VMD■ Video Loss■ Terminal/Command AlarmO KCANCEL SETUPSETUPSETUP EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC Program Event Program Special Days SETUPSETUPSETUPSETUP ■ Event Program 1■ Event Program 2■ Event Program 3■ Event Program 4■ Operation Mode■ Auto Copy VMD OK ALARMOFF CANCEL
[Screenshot 1]
Start operation after displaying the timetable window.
zPress the SET button.
[Screenshot 2]
The pop-up setting menu of the timetable for every day of
the week will be displayed.
The cursor will be displayed and will move to MON
(Monday).
xSelect a day of the week using the arrows button (CD)
and press the SET button.
Note:When a signal is supplied from the ALARM/CON-
TROL connector on the rear panel the external
recording mode changeover terminal (pin no. 24) of
the unit will work with the set timetable for EXT.
[Screenshot 3]
The pop-up settings menu of the timetable for the selected
day of the week will be displayed.
cSelect New Time Table Setup using the arrows button
(
CD) and rotate the jog dial to check the radio button.
107
ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording
Time Table
REC Program
Event Program
Special DaysEvent
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
Time Table (MON) Copy the Other Time Table
New Time Table SetupPeriod 1
Period 2
Period 3
Period 4
Period 5
Period 612 : 00 AM
08 : 00 AM
12 : 00 PM
01 : 00 PM
05 : 00 PM
09 : 00 PM08 : 00 AM
12 : 00 PM
01 : 00 PM
05 : 00 PM
09 : 00 PM
12 : 00 AM
O K
TUE
CANCEL
ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording
Time Table
REC Program
Event Program
Special DaysEvent
MON
TUE
WED
THU
FRI
SAT
SUN
DAILY
EXT12AM 6AM 12PM 6PM 12AM
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording
Time Table
REC Program
Event Program
Special DaysEvent
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
MON
TUE
WED
THU
FRI
SAT
SUN
DAILYEXTOKCANCEL
12AMREC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT6AM 12PM 6PM 12AM
[Screenshot 4]
The radio button for New Time Table Setup is checked.
vMove the cursor to the start time input box for Period 1
using the arrows button.
bRotate the jog dial to set the start time.
The end time can be set in the same way.
Repeat steps 4 and 5 to set for Period 2 - Period 6.
(It is not necessary to set for all of Period 1 - Period
6.)
nSelect OK using the arrows button and press the SET
button.
Notes:
•Start time and end time can be set in 15 minutes
intervals.
•To copy a timetable that is set for a different day of
the week, select Copy the Other Time Table and
select a day of the week by rotating the jog dial in
step 3.
Then, move the cursor to select OK and press the
SET button.
•When the SET button is pressed after moving the
cursor to CANCEL in step 6, the settings will be
canceled and the selected timetable window will be
closed.
•Until the SET button is pressed after moving the
cursor to CANCEL in step 6, the settings will not be
applied to the selected timetable.
[Screenshot 5]
The settings are applied to the selected timetable and the
timetable for all the days of the week will be displayed.
mMove the cursor to the time zone of the day of the week
to which the REC program is to be assigned using the
arrows button.
ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording
Time Table
REC Program
Event Program
Special DaysEvent
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
MON
TUE
WED
THU
FRI
SAT
SUN
DAILYEXTOKCANCEL
12AMREC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT
REC
EVT6AM 12PM 6PM 12AM
ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording
Time Table
REC Program
Event Program
Special DaysEvent
RECPROG1PROG2PROG3PROG4EVTPROG1PROG2PROG3PROG4
Time Table (MON) Copy the Other Time Table
New Time Table SetupPeriod 1
Period 2
Period 3
Period 4
Period 5
Period 612 : 00 AM
08 : 00 AM
12 : 00 PM
01 : 00 PM
05 : 00 PM
09 : 00 PM08 : 00 AM
12 : 00 PM
01 : 00 PM
05 : 00 PM
09 : 00 PM
12 : 00 AM
O K
TUE
CANCEL
,Rotate the jog dial to select a desired REC program/ Event program. (Rotating the jog dial changes the displayed REC pro- gram.) REC progam will be displayed with different colors. Orange:REC program 1/Event program 1 Yellow:REC program 2/Event program 2 Pale purple:REC program 3/Event program 3 Indigo blue:REC program 4/Event program 4 Repeat steps 7 and 8 to assign REC program to other timetables. .Move the cursor to OK using the arrows button and press the SET button. →The REC program/Event program will be assigned to the selected time zone and the selected timetable window will be closed. Note:When the SET button is pressed after moving the cursor to CANCEL in step 9, the settings will be canceled and the selected timetable window will be closed. r[Special Days] Perform the settings for record- ing programs for special days Assign timetables to special days aside from other days of the week. Timetables for special days can be set for up to 30 days. Perform the settings to specify dates as special days and apply the recording schedule to the special days. 108 ScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Time Table REC Program Event Program Special DaysEvent 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 M M M M M M M M M M M M M M M1 -- -- -- -- -- -- -- -- -- -- -- -- -- --D D D D D D D D D D D D D D DSUN -- -- -- -- -- -- -- -- -- -- -- -- -- --16 17 18 19 20 21 22 23 24 25 26 27 28 29 30-- -- -- -- -- -- -- -- -- -- -- -- -- -- --M M M M M M M M M M M M M M M-- -- -- -- -- -- -- -- -- -- -- -- -- -- --D D D D D D D D D D D D D D D-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 1 -- -- -- -- -- -- -- -- -- -- -- -- -- --DATE MODEDATE MODE
109 Perform the settings for image switching such as the sequential display setting or the waiting screen (while log- ging out) setting for displaying on monitors 1 and 2. q[Monitor 1] Switcher function of monitor 1 Perform the settings for the switcher function of monitor 1. ● Live Sequence Perform the settings for the sequential display of live images as follows. [Screenshot 1] Start operation from the Monitor1 menu of Switcher on the SETUP MENU. zMove the cursor to Live Sequence using the arrows button ( CD) and press the SET button. ■ [Switcher] Settings for the switcher function EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Monitor 1 Monitor 2 ■ Live Sequence■ Sequence Timing■ Auto Skip■ Login Screen■ Secret View SETUP INTOFFOFFCAM1 EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Monitor 1 Monitor 2 ■ Live Sequence■ Sequence Timing■ Auto Skip■ Login Screen■ Secret View SETUP INTOFFOFFCAM1 EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Monitor 1 Monitor 2 ■ Live Sequence■ Sequence Timing■ Auto Skip■ Login Screen■ Secret View SETUP INTOFFOFFCAM1 [Screenshot 2] The Live Sequence pop-up menu will be displayed. xMove the cursor to CAM of STEP 1 using the arrows button. [Screenshot 3] The cursor moves to CAM. cSelect how to display images from camera channels in STEP 1 from the following by rotating the jog dial. 1, 2, ... , 16:Displays an image from the selected cam- era channel on a single screen. 1 - 4:Displays images from the camera channels 1 - 4 on a 4-split screen. 5 - 8:Displays images from the camera channels 5 - 8 on a 4-split screen. 9 - 12:Displays images from the camera channels 9 - 12 on a 4-split screen. 13 - 16:Displays images from the camera channels 13 - 16 on a 4-split screen. 1 - 9:Displays images from the camera channels 1 - 9 on a 9-split screen. 10 - 16 (Only for the WJ-HD316):Displays images from the camera channels 10 - 16 on a 9-split screen. --:Skips the selected step. vWhen displaying image from camera channels 1 - 16 on a single screen is selected in step 3, select the cam- era position. Move the cursor to PRESET in STEP 1 using the arrows button. EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Monitor 1 Monitor 2 ■ Live Sequence■ Sequence Timing■ Auto Skip■ Login Screen■ Secret View SETUP INTOFF CAM1OFF OKCANCEL 1 2 3 4 5 6 7 8-- -- -- -- -- -- -- --2s 2s 2s 2s 2s 2s 2s 2s-- -- -- -- -- -- -- --2s 2s 2s 2s 2s 2s 2s 2s 9 10 11 12 13 14 16 159 10 11 12 13 14 15 16 CAMPRESETDWELLSTEP CAMPRESETDWELLSTEP 1 2 3 4 5 6 7 8 EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Monitor 1 Monitor 2 ■ Live Sequence■ Sequence Timing■ Auto Skip■ Login Screen■ Secret View SETUP INTOFF CAM1OFF OKCANCEL 1 2 3 4 5 6 7 8-- -- -- -- -- -- -- --2s 2s 2s 2s 2s 2s 2s 2s-- -- -- -- -- -- -- --2s 2s 2s 2s 2s 2s 2s 2s 9 10 11 12 13 14 15 169 10 11 12 13 14 15 16CAMPRESETDWELLSTEP CAMPRESETDWELLSTEP 1 2 3 4 5 6 7 8
110 ●Auto Skip Select ON of OFF to determine whether or not to skip the camera channel without supplying the video input signal because it is not connected, etc. ON:Skips a channel if it is not connected. OFF:Displays a black screen for a channel not connected. ●Login Screen Select a camera image to be displayed during the login procedure from the following. CAM1 - 16:Displays an image from the selected camera channel. QUAD1 - 4:Displays images from the camera channels 1 - 4 on a 4-split screen. QUAD5 - 8:Displays images from the camera channels 5 - 8 on a 4-split screen. QUAD9 - 12:Displays images from the camera channels 9 - 12 on a 4-split screen. QUAD13 - 16:Displays images from the camera channels 13 - 16 on a 4-split screen. 7 SCREEN:Displays images from the camera channels 1 - 7 on a 7-split screen. 9 SCREEN 1 - 9:Displays images from the camera chan- nels 1 - 9 on a 9-split screen. 9 SCREEN 10 - 16 (only for the WJ-HD316):Displays images from the camera channels 10 - 16 on a 9-split screen. 10 SCREEN:Displays images from the camera channels 1 - 10 on a 10-split screen. 13 SCREEN:Displays images from the camera channels 1 - 13 on a 13-split screen. 16 SCREEN:Displays images from the camera channels 1 - 16 on a 16-split screen. --:No camera image will be displayed (black screen) ●Secret View The secret view is a function to display a black screen on monitor 1 when camera images are displayed with a single screen on monitor 2. Select ON or OFF to determine whether to enable or disable the secret view function. ON:Enables the secret view function. (Camera image dis- played with a single screen on monitor 2 will be dis- played while monitor 1 has a black screen.) OFF:Disables the secret view function. [Screenshot 4] The cursor moves to the PRESET in STEP 1. bRotate the jog dial to select a preset position number for which image is displayed in STEP 1 from the follow- ing. 1 - 64:Moves to the selected preset number. --:Does not move to the preset position. nSelect DWELL in STEP 1 using the arrows button. [Screenshot 5] The cursor moves toDWELL in STEP 1. mRotate the jog dial to select an interval time to go to the next sequential step from 1 - 30 seconds (in 1 second intervals). The sequence step is skipped when 0 s is selected. Repeat steps 2 and 7 to set for other sequence steps. ,Move the cursor to OK using the arrows button and press the SET button. →The settings for the sequential display are set and the sequence setting menu closes. Note:If you move the cursor to CANCEL in step 8 and press the SET button, the setting will be canceled and the sequence setting menu will be closed. ●Sequence Timing Select an image switching way from the following. INT:Switches images according to the settings for the live sequence. EXT:Switches images by signals from an external device. MON 2:Match with the image switching timing of the live sequence on monitor 2. EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Monitor 1 Monitor 2 ■ Live Sequence■ Sequence Timing■ Auto Skip■ Login Screen■ Secret View SETUP INTOFFOFFCAM1 OKCANCEL 1 2 3 4 1-4 5-8 9-12 13-161 1 64 5 -- -- -- --2s 2s 2s 2s 2s 2s 2s 2s-- -- -- -- -- -- -- --2s 2s 2s 2s 2s 2s 2s 2s 9 10 11 12 13 14 15 161-8 9-16 11 12 1-4 5-8 9-12 13-16STEP 1 2 3 4 5 6 7 8CAMDWELLSTEP CAMPRESETDWELLPRESET EventScheduleSystemDisplayCommSwitcherSETUP MENULIVEMaintenanceRecording Monitor 1 Monitor 2 ■ Live Sequence■ Sequence Timing■ Auto Skip■ Login Screen■ Secret View SETUP INTOFFOFFCAM1 OKCANCEL 1 2 3 4 1-4 5-8 9-12 13-161 1 64 5 -- -- -- --2s 2s 2s 2s 2s 2s 2s 2s-- -- -- -- -- -- -- --2s 2s 2s 2s 2s 2s 2s 2s 9 10 11 12 13 14 15 161-8 9-16 11 12 1-4 5-8 9-12 13-16STEP 1 2 3 4 5 6 7 8CAMDWELLSTEP CAMPRESETDWELLPRESET