Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Installation Guide

81
Step 1
Select the desired day of the week.
  →  The time table of the selected day of the week will be 
displayed. 
Step 2
Configure each setting item. 
There are 2 setup pages. To move to another page, select 
the [k] or [l] button. 
    
[Copy	the	other	program]
To copy a time table set for another day of the week, select 
the day of the week to be copied, and select the [Copy] but-
ton.
■  New time table setup
Configure the settings of the following item for each time 
zone. 
[Start]
Set the start...

82
[Panasonic	alarm	protocol]
Select "On" or "Off" to determine whether or not to automati-
cally notify the PC of the event information by Panasonic 
alarm protocol at an event occurrence. 
[Mail]
Select "On" or "Off" to determine whether or not to transmit 
the alarm mail according to the settings of the "Server" page 
- the [Mail] tab (+ page 97) at an event occurrence. 
    [Back]	button
Closes the time table of the selected day of the week and 
returns to the...

83
Configure	the	settings	relating	to	display	[Display]
The settings relating to the display on Monitor 1 and Monitor 2 connected to the recorder and the display on a PC monitor con-
nected to the recorder via a network can be configured on the "Display" page. 
The settings relating to display switching patterns such as multi screen display and sequential display of live images can also be 
configured on this page. 
The "Display" page has [Common], [Monitor 1], [Monitor 2], [Camera title\...

84
Configure the multi screen display pattern and assign camera channels to each 
multi screen segment
Select the display pattern when switching to the multi screen display. In addition, assign the camera channels to each multi 
screen segment. 
When selecting the [Setup] button of "Multi screen setup" on the [Common] tab, the setup page for camera channel alloca\
tion 
will be displayed.
    
To configure the settings, do the following. 
    
Step 1
Check the desired multi screen display pattern...

85
Step 2
Select the desired camera channels to display on the multi 
screen. 
Select the [Setup] button of "Camera setup". 
  →  The setup page for camera channel allocation will be 
displayed. 
Note:
	 •	 The	[Setup]	button	is	displayed	on	"Camera	setup"	for	 multi screen display patterns for which any camera 
channels can be selected. The [Setup] button is not dis-
played for multi screen display patterns for which any 
camera channels cannot be selected. 
 
    Step 3
Select the...

86
Configure	the	display	settings	for	Monitor	1	[Monitor	1]
Select the [Monitor 1] tab on the "Display" page. (+ Page 60)
Select "On" or "Off" to determine whether or not to display the time, camera title and ala\
rm display on Monitor 1. 
The settings relating to the sequence display on Monitor 1 can also be configured on this tab. 
    
[Time	&	date	display]
Select "On" or "Off" to determine whether to enable or dis-
able the time display. 
[Camera	title...

87
Configuring the sequence display settings
Configure the sequential display settings of camera images. 
When selecting the [Setup] button of "Live sequence" on the [Monitor 1] \
tab, the setup page for live sequence will be displayed. 
(+ Page 86)
    
Configure the following setting items for each step of 
sequential display. 
Up to 16 steps can be registered. 
[Cam.]
Select a camera image to be displayed at each step from 
the following. Cam. 1 to Cam. 16: Displays an image from the select-ed...

88
Configure	the	display	settings	for	Monitor	2	[Monitor	2]
Select the [Monitor 2] tab on the "Display" page. (+ Page 60)
Set the position to display the status bar and select "On" or "Off" to determine whether or not to display the camera title. 
The settings relating to the sequence display on Monitor 2 can also be configured on this tab. 
    
[Status	display]
Select the position to display the status bar. Upper: Displays the status bar on the top of the screen. 
Low: Displays...

89
Configure	the	camera	title	[Camera	title]
Select the [Camera title] tab on the "Display" page. (+ Page 60)
The camera title can be configured on this tab. 
    
[Display]
Enter a camera title to be displayed on Monitor 2. 
Enter up to 14 alphanumeric characters for the camera title. Note:
	 •	 Available	characters:
    !"#$%&'( )*+,-./:;?@[\]^_`{|}~ (space)
[Embedded	Rec]
Enter the camera title to be recorded together with the imag-
es.
The setting is also applied to the camera title...

90
Configure the settings relating to the sequential display on a PC monitor 
[Network]
Select the [Network] tab on the "Display" page. (+ Page 60)
The settings for the sequential display when displaying images on a moni\
tor of a PC connected to this recorder via a network can 
be configured on this tab. 
    
[The	method	of	sequence]
Select the desired sequential display pattern from the follow-
ing. 1-screen: Displays images with the sequential display on a 1-split screen. 
4-screen: Displays...