Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Installation Guide

121
[Pre-recording	area	information]
When the [Display] button is selected, the "Pre-recording 
area info." page will be displayed, and the capacity of the 
pre-event recording area assigned to each camera channel.
When the [Back] button is selected, the "Pre-recording area 
information" page will be closed, and the display will return 
to the [Disk information] tab. 
    
Confirm	the	network	information	[Network	information]
Select the [Network information] tab of the...

122
Configure	the	settings	and	operations	relating	to	hard	disk	drives	[Disk]
Select the [Disk] tab of the "Maintenance" page. (+ Page 60)
The settings relating to an action to be taken when available capacity of the hard disk drives run out (Disk end mode) and when 
the capacity of hard disk drives is warned (HDD capacity warning) can be configured, data recorded on the hard disk drives can 
be deleted and SD memory cards can be formatted on this tab. 
It is also possible to display the disk...

123
Manage	the	settings	[Settings	management]
Select the [Settings management] tab of the "Maintenance" page. (+ Page 60)
The settings of the setup pages can be saved in the SD memory card, and saved settings can be called up (loaded) from the 
recorder on this tab. It is also possible to restore the default settings (Initialization) on this tab.
    
[Reset	to	the	default]
Initializes the setting data. Select the [Execute] button to 
start formatting. Note:
	 •	 The	following	setting	items	will...

124
View	Log	Information	[Logs]
Select the [Logs] tab of the "Maintenance" page. (+ Page 60)
The following logs can be checked on this tab. 
   Error log: Logs of error
    Access log: Logs of accessing the recorder
    Event log: Logs of event occurrence time & date and details
    Network log: Check the network log
Check the error log
The error log will be displayed in list form. When the [Error log] button of the [Logs] tab is selected, the following page will be\
 dis-
played. When the...

125
Check the event log
The event logs (occurrence time & date and event details) will be displayed in list form.
Refer to the Operating Instructions (PDF) for further information about the events.
When the [Event log] button of the [Logs] tab is selected, the following\
 page will be displayed. 
Up to 750 logs are saved.
    
About event logs
VMD-*: Motion has been detected.
LOSS-*: Video loss has occurred.
COM-**: Command alarm has occurred.
TRM-**: Terminal alarm has occurred.
SITE-*: Camera site...

126
Manage	hard	disk	drives
About hard disk drives
Images from cameras will be recorded on the HDD unit(s) in the recorder.
This recorder manages the hard disk drives by dividing them virtually into the following recording areas. 
	 •	 Normal	recording	area:		 Recording	area	used	when	an	event	does	not	occur	(Manual	recording,	schedule	recording)
	 •	 Event	recording	area:	 	
Recording	area	used	when	an	event	occurs	(Post-event	recording,	emergency	recording).	
	 •	 Pre-event	recording	area:	 Recording...

127
Step 1
Select the [Setup] button of "HDD disk menu" on the 
"Maintenance" page - [Disk] tab. 
→  The window with the user name and password entry fields 
will be displayed. 
    Step 2
Select the [OK] button after entering the user name and the 
password of an administrator.
  →  The disk configuration page will be displayed. 
    Select the [Main] button to return from the disk configu-
ration page to the page displayed during normal opera-
tion. 
    
About the disk configuration...

128
Check the hard disk drive information
The original capacity, the available capacities of the hard disk drives of the recorder or the extension units (Ext.1 to 3), and capac-
ities of each recording area will be displayed. 
Select the [Disk Information] tab of the "Disk Information" page on the \
disk configuration page. 
Refer to the "Maintenance" page - the [Disk Information] tab for further\
 information about the items displayed on the [Disk 
Information] tab. (+ Page 119)
When the...

129
Format	the	hard	disk	drives	[Format]
Hard disk drives will be formatted, and one of the normal recording area, event recording area or pre-event recording area will be 
assigned to each drive. It is necessary to format a hard disk drive on either of the following conditions. 
	 •	 When	an	hard	disk	drive	installed	in	the	recorder	is	removed	or	added
	 •	 When	an	optional	extension	unit	is	connected	and	used	for	the	first	timeImportant:
	 •	 When	the	hard	disk	drive	is	formatted,	all	the	recorded...

130
Step 4
Select the [OK] button.
  →  The format starts, and the message will be displayed to 
show the drive is being formatted. When formatting is 
complete, the result of format will be displayed. 
Step 5
To return to the [Format] tab, select the [Close] button.