Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Installation Guide

101
Configure	the	settings	relating	to	DNS	[DNS]
Select the [DNS] tab on the "Network" page. (+ Page 60)
The settings relating to DNS (Domain Name System) can be configured on this tab. 
    
[DNS]
Determine whether or not to use the DNS. 
   Off/Auto/Manual
	 •	 Select	"Manual"	or	"Auto"	to	enable	IP	address	 searching by the host name using the DNS. 
	 •	 Select	"Off"	when	not	using	the	DNS.	
	 •	 Selecting	"Auto"	is	available	only	when	"On"	is	 selected...

102
Configure	the	settings	relating	to	DDNS	[DDNS]
Select the [DDNS] tab on the "Network" page. (+ Page 60)
The settings relating to DDNS (Dynamic Domain Name System) can be configured on this tab. 
    
[DDNS]
Select "On" or "Off" to determine whether or not to use the 
DDNS. 
When "On" is selected, configure the following settings. 
[User	name]
Enter a user name registered in the DDNS. 
Enter up to 32 alphanumeric characters excluding "&" listed 
in the...

103
Configure	the	settings	relating	to	SNMP	[SNMP]
Select the [SNMP] tab on the "Network" page. (+ Page 60)
The settings for the SNMP can be configured on this tab. The settings are configured to check the status of the recorder, etc. by 
connecting the SNMP manager.
    
[Community]
Enter a name used for SNMP authentication in alphanumeric 
characters. Enter up to 32 alphanumeric characters exclud-
ing "&" listed in the description of "Available characters". (+ 
Page 96) 
[System...

104
Configure the Panasonic alarm protocol settings  
[Panasonic	alarm	protocol]
Select the [Panasonic alarm protocol] tab on the "Network" page. (+ Page 60)
The settings to notify the PC of the event and error information when an event or an error occurs can be configured on this tab. 
To display the event and error information, it is necessary that the dedicated software is installed on the PC.
Refer to the "readme.txt" file on the CD-ROM for details about the software.
    
[Port...

105
Configure	the	settings	relating	to	network	transmission	[Transmission]
Select the [Transmission] tab on the "Network" page. (+ Page 60)
The settings relating to the resolution and rate to transmit live images to a PC via a network can als\
o be configured on this tab. 
    
[Live	video	resolution]
Select the resolution for live images from the following. REC resolution: Live images are transmitted with the resolution applied at the time of recording. 
QVGA: Live images are transmitted in the...

106
The settings relating to the user authentication On/Off, PSD user, administrator registration and operation levels can be config-
ured on the "User mng." page. It is possible to restrict users and hosts (PCs) to access the recorder by registering the users and 
hosts (PCs) who can access the recorder in advance when "On" is selected for the user authentication and the\
 host authentica-
tion. 
The "User mng" page has [Basic], [Administrator], [User], [Host] and [Us\
er level]...

107
Register	or	change	the	administrator	information	[Administrator]
Select the [Administrator] tab on the "User mng." page. (+ Page 60)
The administrator information relating to the password and default screen, etc. can be registered on this tab. 
To change the administrator information that has been registered, select the [Edit] button after changing each setting item. 
    
[Administrator	name]
Enter an administrator name. Enter 5 to 8 alphanumeric 
characters for the administrator name. Enter...

108
Register,	change	or	delete	the	user	information	[User]
Select the [User] tab on the "User mng." page. (+ Page 60)
The user information such as the user name, password and operation level can be registered, changed and deleted on this tab. 
Registers user information
Register user information such as a user name, password and operation level. 
Select the [Registration] button after completing each setting item. 
    
[User	name]
Enter a user name.Enter 5 to 14 alphanumeric characters for 
the...

109
Change or delete the user information
Change or delete the user information that has been registered. 
    
Step 1
Select the [Edit/delete] button on the [User] tab.
  →  The "User edit" page will be displayed. 
Step 2
Select the "User name" of the user to change or delete the 
user information.
  →  The user information of the selected user will be dis-
played. 
Note:
	 •	 Select	the	[Back]	button	to	return	to	the	screen	to	regis- ter a user.
    Step 3
To change the user...

110
Register, change, or delete a PC (host) accessible to this recorder 
[Host]
Select the [Host] tab on the "User mng." page. (+ Page 60)
The information of host that accesses the recorder via a network can be registered, changed and deleted on this tab. 
Registers host information
Registers the host information such as the IP address, operation level and priority. 
Select the [Registration] button after completing each setting item. 
    
[Host	IP	address]
Enter an IP address. Enter 4 units...