Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Installation Guide

141
ContentError log Network LogDisplay on 
Monitor	2Output from the 
connector at  
the rear panel
Single mode format failure Recorder: MAIN-y SINGLE  FORMAT ERROR 
Extension unit: EXTx-y SINGLE 
FORMAT ERROR –
F–FAIL HDD error
RAID5 format failure Recorder: MAIN RAID5  FORMAT ERROR 
Extension unit: EXTx RAID5 
FORMAT ERROR –
F–FAIL HDD error
RAID6 format failure Recorder: MAIN RAID6  FORMAT ERROR 
Extension unit: EXTx RAID6 
FORMAT ERROR –
F–FAIL HDD error
RAID5 1 down Recorder: MAIN RAID5 1DOWN...

142
ContentError log Network LogDisplay on 
Monitor	2Output from the 
connector at  
the rear panel
Partition error (per HDD) Recorder: MAIN-y PARTITION  ERROR 
Extension unit: EXTx-y 
PARTITION ERROR –
––
Partition error (per unit) Recorder: MAIN PARTITION  ERROR 
Extension unit: EXTx 
PARTITION ERROR –
––
HDD RAID5 recovery fail-
ure Recorder: MAIN RAID5 
RECOVERY FAILURE 
Extension unit: EXTx RAID5 
RECOVERY FAILURE –
R–FAIL HDD error
HDD RAID6 recovery fail-
ure Recorder: MAIN RAID6 
RECOVERY FAILURE...

143
ContentError log Network LogDisplay on 
Monitor	2Output from the 
connector at  
the rear panel
FTP server transfer com-
plete –
SVR_FWD_OK – –
Failed to resolve FTP serv-
er address from DNS –
SVR_ADD_ERR – –
Failed to find FTP server – SVR_ERR ––
FTP uploading error – UPLOAD_ERR  ––
FTP passive mode error – PASSIVE_ERR  ––
FTP log-in failure – LOGIN_FAULT  – –
Other error for FTP – OTHER_ERR  ––
DDNS IP address update – IP_ADD_
UPDATE_OK–
–
Failed to find DDNS server – SVR_ERR  ––
Password error...

144
ContentError log Network LogDisplay on 
Monitor	2Output from the 
connector at  
the rear panel
HTTP download failure – DOWNLOAD_
ERR–
–
HTTP request invalid – REQUEST_ERR  ––
Other errors for HTTP – OTHER_ERR  –– 

145
If a hard disk drive failure occurs in the RAID 5 or RAID 6 mode, the error display will appear as shown in the following table.
In the RAID 5 mode, it is possible to read data on the other hard disk drives and recover data even when a single hard disk drive 
becomes faulty (1 down).
In the RAID 6 mode, it is possible to read data on the other hard disk drives and recover data even when 2 hard disk drives 
become faulty (2 down).
When the hard disk drive becomes faulty (down), replace it...

146
Replacement of a faulty hard disk drive in the RAID mode
In the RAID 5 mode, it is possible to read data on the other hard disk drives and recover data even when a single hard disk drive 
becomes faulty (1 down).
In the RAID 6 mode, it is possible to read data on the other hard disk drives and recover data even when 2 hard disk drives 
become faulty (2 down).Note:
	 •	 Replace	the	faulty	disk	immediately	and	recover	data	when	a	single	hard	disk	drive	becomes	faulty	(1	down)	even	in	the	RAID	 6 mode....

147
Check the following before requesting repair.
Contact a dealer if a problem cannot be solved even after checking and trying the solution or if\
 a problem is not described below, 
or when having a problem with installations.
SymptomCheck	item/RemedyRef. Page
Power is not turned on.
	 •	 Is	the	power	plug	connected	to	the	AC	outlet	firmly?
    Confirm the cable is firmly connected. –
	 •	 Is	
the	power	 cord	(provided	 with	this	product)	 connected	 to	the	
power inlet of the recorder firmly?...

148
SymptomCheck	item/RemedyRef. Page
Blur images are displayed.
	 •	 Is	the	lens	of	the	camera	clean?
    Check if the lens is not dusty or dirty. –
Cannot open the setup 
menu.
	 •	 Is	the	user	level	of	the	current	login	user	allowed	to	display	the	 setup menu?
    Check the user level of the current login user. 108
	 •	 Is	Monitor	2	being	operated?
   
The setup menu will not be displayed on Monitor 1. 57
Cannot record.
	 •	 Is	there	available	space	on	the	hard	disk	drive?
    Check the available disk...

149
SymptomCheck	item/RemedyRef. Page
Cannot control the camera.
	 •	 Is	the	user	level	of	the	current	login	user	allowed	to	control	the	 camera?
    Check the settings. 108
	 •	 Is	the	"BUSY"	indication	displayed	on	the	operation	panel? 
When the "BUSY" indication is displayed on the operation 
panel, a user with higher priority is controlling the camera. Operating 
Instructions  (PDF)
Alarm operations are not 
activated.
	 •	 Are	signals	correctly	supplied	to	the	ALARM/CONTROL	con-...

150
SymptomCheck	item/RemedyRef. Page
The	 extension	 unit	is	not	 rec-
ognized (even when con-
necting	the	extension	unit).
	 •	 Was	the	power	of	the	extension	unit	turned	on	before	turning	 on the power of the recorder? Reboot the system and turn on 
the power of the extension unit first. –
	 •	 When	using	a	circuit	breaker	or	equivalent	device	to	turn	on/off	
the power of the whole system at once, make sure that all 
devices are connected to the same power source. –
	 •	 When	using	an	UPS...