Home
>
Panasonic
>
Recording Equipment
>
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Installation Guide
Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Installation Guide
Here you can view all the pages of manual Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Installation Guide. The Panasonic manuals for Recording Equipment are available online for free. You can easily download all the documents as PDF.
Page 131
131 Format the pre-event recording area Configure the following settings relating to the pre-event recording area. • Assign the capacity of pre-event recording area to each camera channels. • Format a hard disk drive set for another recording area again to set for the pre-event recording area. • Format a hard disk drive to add a camera channel not assigned to the existing pre-event recording area. Important: • Before formatting the hard disk drive to set for a pre-event recording area,...
Page 132
![Page 132
132
Step 4
Select the hard disk drive on which the pre-event recording
area is to be created (or added) and select the [Set] button.
Step 5
Select the desired camera channel for the selected hard disk
drive, and enter the capacity to be assigned.
• Pre-event recording areas for up to 16 camera channels can be created on a single hard disk drive.
• It is impossible to select the camera channels set for existing pre-event recording areas for other hard disk
drives.
• Enter the value 15 GB...](http://img.usermanuals.tech/thumb/58/72217/w300_wj-hd616_716_installation_guide_d-131.png "Page 132
132
Step 4
Select the hard disk drive on which the pre-event recording
area is to be created (or added) and select the [Set] button.
Step 5
Select the desired camera channel for the selected hard disk
drive, and enter the capacity to be assigned.
• Pre-event recording areas for up to 16 camera channels can be created on a single hard disk drive.
• It is impossible to select the camera channels set for existing pre-event recording areas for other hard disk
drives.
• Enter the value 15 GB...")
132 Step 4 Select the hard disk drive on which the pre-event recording area is to be created (or added) and select the [Set] button. Step 5 Select the desired camera channel for the selected hard disk drive, and enter the capacity to be assigned. • Pre-event recording areas for up to 16 camera channels can be created on a single hard disk drive. • It is impossible to select the camera channels set for existing pre-event recording areas for other hard disk drives. • Enter the value 15 GB...
Page 133
![Page 133
133
Step 1
Hold down the [USE] button for 2 seconds or more.
→ The buzzer will start sounding. The HDD Configuration
menu will be displayed on Monitor 2.
Step 2
Select the "Execute>" button of "Remove".
→ The HDD remove window will be displayed.
Replacement/addition of hard disk drives
Replace hard disk drives
To replace the HDD units, proceed as follows.
It is possible to replace an HDD unit without stopping operation.
Prepare for removing the hard disk drives.
(HDD...](http://img.usermanuals.tech/thumb/58/72217/w300_wj-hd616_716_installation_guide_d-132.png "Page 133
133
Step 1
Hold down the [USE] button for 2 seconds or more.
→ The buzzer will start sounding. The HDD Configuration
menu will be displayed on Monitor 2.
Step 2
Select the \"Execute>\" button of \"Remove\".
→ The HDD remove window will be displayed.
Replacement/addition of hard disk drives
Replace hard disk drives
To replace the HDD units, proceed as follows.
It is possible to replace an HDD unit without stopping operation.
Prepare for removing the hard disk drives.
(HDD...")
133
Step 1
Hold down the [USE] button for 2 seconds or more.
→ The buzzer will start sounding. The HDD Configuration
menu will be displayed on Monitor 2.
Step 2
Select the "Execute>" button of "Remove".
→ The HDD remove window will be displayed.
Replacement/addition of hard disk drives
Replace hard disk drives
To replace the HDD units, proceed as follows.
It is possible to replace an HDD unit without stopping operation.
Prepare for removing the hard disk drives.
(HDD...
Page 134
![Page 134
134
Step 3
Select the hard disk drive to be shut down, and select the
[OK] button.
When the hard disk drive on the recorder is to be shut down:
Main-y ("y" indicates the hard disk drive number.)
When the hard disk drive on the extension unit is to be
added to the system: Ext.x-y ("x" indicates the unit
number and "y" indicates the hard disk drive number.)
→ When the shutdown process is complete, the HDD indi-
cator (STS (status)) on the front panel will go off.
Note:
•...](http://img.usermanuals.tech/thumb/58/72217/w300_wj-hd616_716_installation_guide_d-133.png "Page 134
134
Step 3
Select the hard disk drive to be shut down, and select the
[OK] button.
When the hard disk drive on the recorder is to be shut down:
Main-y (\"y\" indicates the hard disk drive number.)
When the hard disk drive on the extension unit is to be
added to the system: Ext.x-y (\"x\" indicates the unit
number and \"y\" indicates the hard disk drive number.)
→ When the shutdown process is complete, the HDD indi-
cator (STS (status)) on the front panel will go off.
Note:
•...")
134
Step 3
Select the hard disk drive to be shut down, and select the
[OK] button.
When the hard disk drive on the recorder is to be shut down:
Main-y ("y" indicates the hard disk drive number.)
When the hard disk drive on the extension unit is to be
added to the system: Ext.x-y ("x" indicates the unit
number and "y" indicates the hard disk drive number.)
→ When the shutdown process is complete, the HDD indi-
cator (STS (status)) on the front panel will go off.
Note:
•...
Page 135
135 Add a hard disk drive Hard disk drives will be locally procured. When adding an HDD unit, proceed as follows. It is possible to add an HDD unit without stopping operation. Install an HDD unit in the recorder (+ Page 52) Hard disk drive auto recognition (+ Page 136) ➜ The hard disk drive is installed as a record-able disk. Add a hard disk drive to the system. (+ Page 137) The hard disk drive is installed as a playback- only disk. The hard disk drive is installed as a recordable disk. The hard disk...
Page 136
136 Auto recognition of hard disk drives When installing an HDD unit while the power of the recorder is on, the hard disk drive recognition process will automatically start. During the hard disk drive recognition process, the HDD indicator (STS (status)) on the front panel will blink orange. When an unformatted hard disk drive is installed Format of the hard disk drive will automatically start. When formatting of the hard disk drive is completed, the HDD indicator (STS (status)) on the front panel will...
Page 137
![Page 137
137
Add a hard disk drive to the system
To use the recognized playback-only disk as a recordable disk, it is necessary to add it to the system. Addition the playba\
ck-only
disk to the system can be made on the HDD Configuration menu.
Before the following procedure, detach the front cover from the recorder. (+ Page 21)
Step 1
Hold down the [USE] button for 2 seconds or more.
→ The buzzer will start sounding. The HDD Configuration
menu will be displayed on Monitor 2.
Step 2
Move the cursor onto...](http://img.usermanuals.tech/thumb/58/72217/w300_wj-hd616_716_installation_guide_d-136.png "Page 137
137
Add a hard disk drive to the system
To use the recognized playback-only disk as a recordable disk, it is necessary to add it to the system. Addition the playba\
ck-only
disk to the system can be made on the HDD Configuration menu.
Before the following procedure, detach the front cover from the recorder. (+ Page 21)
Step 1
Hold down the [USE] button for 2 seconds or more.
→ The buzzer will start sounding. The HDD Configuration
menu will be displayed on Monitor 2.
Step 2
Move the cursor onto...")
137
Add a hard disk drive to the system
To use the recognized playback-only disk as a recordable disk, it is necessary to add it to the system. Addition the playba\
ck-only
disk to the system can be made on the HDD Configuration menu.
Before the following procedure, detach the front cover from the recorder. (+ Page 21)
Step 1
Hold down the [USE] button for 2 seconds or more.
→ The buzzer will start sounding. The HDD Configuration
menu will be displayed on Monitor 2.
Step 2
Move the cursor onto...
Page 138
![Page 138
138
When connecting an extension unit, it is necessary to add the extension \
unit to the system. It is also necessary to start the shut-
down process of the extension unit to remove the extension unit from the system.
Add an extension unit to the system
The extension unit will be recognized as playback-only disks just after connecting it to the recorder.
To use as recordable disks, it is necessary to add the extension unit to the system. It\
is possible to use all the hard disk drives in
the extension...](http://img.usermanuals.tech/thumb/58/72217/w300_wj-hd616_716_installation_guide_d-137.png "Page 138
138
When connecting an extension unit, it is necessary to add the extension \
unit to the system. It is also necessary to start the shut-
down process of the extension unit to remove the extension unit from the system.
Add an extension unit to the system
The extension unit will be recognized as playback-only disks just after connecting it to the recorder.
To use as recordable disks, it is necessary to add the extension unit to the system. It\
is possible to use all the hard disk drives in
the extension...")
138 When connecting an extension unit, it is necessary to add the extension \ unit to the system. It is also necessary to start the shut- down process of the extension unit to remove the extension unit from the system. Add an extension unit to the system The extension unit will be recognized as playback-only disks just after connecting it to the recorder. To use as recordable disks, it is necessary to add the extension unit to the system. It\ is possible to use all the hard disk drives in the extension...
Page 139
![Page 139
139
Step 1
Hold down the [USE] button for 2 seconds or more.
→ The buzzer will start sounding. The HDD Configuration
menu will be displayed on Monitor 2.
Step 2
Move the cursor onto "Execute>" of "Remove HDD unit".
→ The "Remove HDD unit" window will be displayed.
Step 3
Select the extension unit to shut down, and select the [OK]
button.
Extension unit: Ext.x (x: unit number)
→ When the shutdown process is complete, the HDD indi-
cator (STS (status)) on the front panel...](http://img.usermanuals.tech/thumb/58/72217/w300_wj-hd616_716_installation_guide_d-138.png "Page 139
139
Step 1
Hold down the [USE] button for 2 seconds or more.
→ The buzzer will start sounding. The HDD Configuration
menu will be displayed on Monitor 2.
Step 2
Move the cursor onto \"Execute>\" of \"Remove HDD unit\".
→ The \"Remove HDD unit\" window will be displayed.
Step 3
Select the extension unit to shut down, and select the [OK]
button.
Extension unit: Ext.x (x: unit number)
→ When the shutdown process is complete, the HDD indi-
cator (STS (status)) on the front panel...")
139 Step 1 Hold down the [USE] button for 2 seconds or more. → The buzzer will start sounding. The HDD Configuration menu will be displayed on Monitor 2. Step 2 Move the cursor onto "Execute>" of "Remove HDD unit". → The "Remove HDD unit" window will be displayed. Step 3 Select the extension unit to shut down, and select the [OK] button. Extension unit: Ext.x (x: unit number) → When the shutdown process is complete, the HDD indi- cator (STS (status)) on the front panel...
Page 140
140 About the error log The following are the descriptions about the contents of the error log and the network log. • "x" indicates the extension unit number. • "y" indicates the HDD unit number. ContentError log Network LogDisplay on Monitor 2Output from the connector at the rear panel Outage detection POWER LOSS –POWER Error + Outage processing end* Recover from a power out- age POWER RECOVERED ––– Alteration detection ALTERED **CH –ALT–* (*: camera ch)Error No response...