Panasonic Digital Disk Recorder Wj Hd616 Wj Hd716 Installation Guide

91
[4-screen	live	sequence]
Configure the settings for the sequential display when dis-
playing images with the sequential display on a 4-split 
screen. 
When the [Setup] button is selected, the following setup 
page will be displayed to configure each setting item. 
	 •	 [Cam.]
   Select a camera image to be displayed at each step 
from the following. 
    --: Skips the selected step. 
Quad1 - 4: Displays images from camera channels 1 - 4  on a 4-split screen. 
Quad5 - 8: Displays images from camera...

92
Configure the settings relating to communication with other devices 
[Communication]
It is necessary to apply the same settings such as the communication spe\
ed and the communication protocol to the recorder 
and the external devices such as a controller connected to the DATA port on the rear panel of the recorder 
The settings relating to the communication method to control cameras and to communicate with external devices can be config-
ured on the "Communication" page. 
The...

93
[Unit	address	(system)]
A unit address is a unique number to be assigned to each 
PS·Data compatible device. Each address of the system 
devices must be unique to identify them when connecting 
two or more PS·Data compatible devices.
For example, numbers "001" - "099" are assigned to unit 
addresses for system devices.
[Unit	address	(controller)]
The unit address (controller) is used to control a PS·Data 
device connected to this unit. Assign a number from "001" -...

94
Configure	the	settings	relating	to	RS485	[RS485	setup]
Select the [RS485 setup] tab on the "Communication" page. (+ Page 60)
The settings for RS485 can be configured on this tab. 
    
[Protocol]
Select the protocol used for RS485 communication. 
   Panasonic/Pelco-D
Default: Panasonic
[Baud	rate]
Select a communication speed for data transmission with a 
connected device from the following:
    2 400/4 800/9 600/19 200/38 400 (bps)
Default: 19 200
[Control	camera	ch]
Allocate the RS485 port 1...

95
Configure	the	settings	relating	to	the	server	[Server]
The settings relating to the NTP server, the FTP server and the mail server can be configured on the "Server" page. 
The "Server" page has [NTP], [FTP] and [Mail] tabs. 
Configure	the 	settings 	relating 	to 	time 	adjustment 	according 	to 	the 	NTP	
server	[NTP]
Select the [NTP] tab on the "Server" page. (+ Page 60)
The settings when time is adjusted according to the NTP (Network Time Protocol) server can be configured on...

96
Configure	the	settings	relating	to	the	FTP	server	[FTP]
Select the [FTP] tab on the "Server" page. (+ Page 60)
The basic settings such as the FTP server address, user name and password and the setting to transmit alarm images at an 
event occurrence can be configured on this tab. 
    
[FTP	server	address]
Enter an address or name of the FTP server to transmit 
images. 
The name of the FTP server is available only when selecting 
"Manual" or "Auto" for the "Network"...

97
Configure	the	settings	relating	to	the	mail	notification	[Mail]
Select the [Mail] tab on the "Server" page. (+ Page 60)
The settings of alarm mail notice, the settings of error report mail (+ Operating Instructions (PDF)) and the settings to use the mail 
functions can be configured on this tab. 
    
[SMTP	server	address]
Enter an IP address or a name of the SMTP server to send 
e-mails. The name of the SMTP server is available only when 
selecting "Manual" or "Auto" for the...

98
[Other	destinations]
Add other destinations. When the [Setup] button is selected, 
the following page will be displayed. When the [Setup] but-
ton is selected, the following page will be displayed. 
Enter the desired mail address and mail type for "Address 1" 
- "Address 4". 
The setup procedure is the same as [Address 1]
When the [Back] button is selected, the setup page will be 
closed, and the display will return to the [Mail] tab.  

99
Configure	the	settings	relating	to	network	[Network]
The basic network settings required to operate this unit using a PC via a network such as a LAN can be co\
nfigured on the 
"Network" page. The settings relating to the Panasonic alarm protocol and the settings relating to the resolution and rate to 
transmit live images can also be configured on this page. 
The "Network" page has [Basic], [DNS], [DDNS], [SNMP], [Panasonic alarm \
protocol] and [Transmission] tabs. 
Configure	the...

100
[IP	address]
When "Off" is selected for "DHCP", enter an IP address. 
Enter 4 units from the decimal numbers (0-255). 
Default: 192.168.0.250
[Subnet	mask]
Enter a subnet mask according to the network environment 
when "Off" is selected for "DHCP". Enter 4 units from the 
decimal numbers (0-255). 
Default: 255.255.255.0
[Default	gateway]
Enter the IP address of the gateway according to the net-
work environment when "Off" is selected for "DHCP". Enter...