Panasonic Digital Business System Section 700 Feature Operation Manual

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-3
DSLT
Figure 5-1 illustrates the DSLT. For more information on DSLT operation, see 
the Digital SLT User’s Guide (Section 790).
Please refer to “Appendix A: CPC-EX 1.0 Updates” and “Appendix B: CPC-
All/B 8.0 Updates” for additional information on VB-44xxx Series Small 
Display Key Telephone features.
Note:
The DSLT can only be used with CPC-AII and CPC-B Version 3.1 or 
higher.
Figure 5-1. Digital...

Chapter 5. DSLT Features Section 700 - Operation 
5-4 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Absence Message
(All Versions)
Description
DSLT users can leave text messages on their phones when they are away.
When the unattended extension is called by a display phone, the text message 
appears on the caller’s phone.
One of the following messages can be selected. Messages 5 to 9 can be 
changed through system programming.
Table 5-1.  Absence Messages 
Operation
To Set an Absence Message
1.  Lift...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-5
To Cancel an Absence Message
1.  Lift the handset or press ON/OFF
. 
2. Dial “71.”
3.  Replace the handset or press ON/OFF
.
Related Programming
 FF1 (System) Extension Class of Service Setting (CPC-AII and CPC-B 
Version 3.1 or higher)
 FF3 (Extension) Extension Class of Service Assignment (CPC-AII and 
CPC-B Version 3.1 or higher)
 FF6 (Names and Messages): Absence Messages
Considerations
...

Chapter 5. DSLT Features Section 700 - Operation 
5-6 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Forwarding. In versions prior to 5.0, incoming trunk calls to extensions are 
routed according to the ringing assignment for the trunk.
The following types of incoming trunk calls follow Permanent Call 
Forward settings:
-  Direct trunk calls (including DID/DNIS)
-  Transferred trunk calls.
Auto Redial
(CPC-AII and CPC-B Version 7.0 or higher)
Description
If the Redial key is pressed when the extension...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-7
2.  Dial the extension number.
3.  When you hear busy tone, dial “4.”
 Both phones issue an alert tone (system programming required).
Related Programming
 FF1 (System): Alert Tone for Busy Override and OHVA
 FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B 
Version 3.1 or higher)
 FF3 (Extension): Extension Class of Service Assignment (CPC-AII and 
CPC-B Version 3.1 or higher)
...

Chapter 5. DSLT Features Section 700 - Operation 
5-8 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Call Forwarding--All Calls
. When this feature is activated, all incoming 
calls to an extension are immediately forwarded.
Call Forwarding--No Answer.
 When this feature is activated, unanswered 
calls ring until the Call Forward No Answer timer expires. When the timer 
expires, the unanswered calls are forwarded.
Call Forwarding--Busy.
 When this feature is activated, all incoming calls 
to a busy...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-9
Operation
To activate Call Forwarding:
1.  Lift the handset or press ON/OFF
. 
The phone issues intercom dial tone.
2. Dial “72.”
3.  Dial the appropriate call forwarding code.
Note: 
Beginning with CPC-AII and CPC-B Version 7.0, all forwarding 
types (All Calls, No Answer, Busy, Busy/No Answer) allow call 
forwarding outside eliminating the need for Call Forwarding--External.
4.  If you are forwarding...

Chapter 5. DSLT Features Section 700 - Operation 
5-10 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
 FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B 
Version 3.1 or higher)
 FF3 (Extension): Extension Class of Service Assignment (CPC-AII and 
CPC-B Version 3.1 or higher)
 FF3 (Extension): Permanent Call Forward Type (CPC-AII and CPC-B 
Version 3.1 or higher)
 FF3 (Extension): Permanent Call Forward Extension (CPC-AII and CPC-
B Version 3.1 or higher)
 FF10 (Speed Dialing):...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-11
 Calls can be forwarded to a third-party voice mail (a system other than the 
DBS Voice Mail) by using the “Call Forward ID Code” described on page 
3-13.
 Beginning with CPC-AII and CPC-B Version 7.0, all call types can be 
forwarded outside using speed dials. However, if Least Cost Routing is 
activated, dial “9” trunks cannot be used. Select another trunk group 
instead (81-86).
Call Hold
(All...

Chapter 5. DSLT Features Section 700 - Operation 
5-12 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
 If there is no response to the Hold Recall tone, the tone is issued at the 
Attendant Phone. However, no tone is issued at the Attendant Phone if 
Night Mode is activated. 
 If your system has onhook transfer activated, and you have placed an 
outside call on hold and then made an Intercom Call, make sure the other 
extension presses the FLASH
 key or hangs up before you do. If you hang 
up before...