Panasonic Digital Business System Section 700 Feature Operation Manual

Section 700 - Operation Chapter 6. SLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   6-15
 The third party need only pick up the handset to speak to the outside 
line.
Related Programming
 FF1 (System): Onhook (Automatic) Transfer
 FF1 (System): Recall Timer for Extension-Transferred CO Calls
 FF1 (System): Recall Timer for Extension-Transferred Intercom Calls
Considerations
 In order for users to transfer calls by flashing the switchhook, dialing the 
extension, and going onhook, the...

Chapter 6. SLT Features Section 700 - Operation 
6-16 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
The phone issues intercom dial tone.
2.  Dial the extension number to which the call is to be transferred.
3.  When your call is answered, inform the third party of the transfer.
4.  Replace the handset. 
The third party need only pick up the handset to speak to the outside line.
To use Screened Transfer when Onhook Transfer is disabled:
1.  Flash the switchhook to place the outside call on hold.
The...

Section 700 - Operation Chapter 6. SLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   6-17
 When you transfer a call to an extension that is busy or does not answer 
and does not have Call Forwarding activated, a recall tone sounds at your 
extension after Transfer Recall Timer expires. 
Call Waiting
(All Versions)
Description
You can send a Call Waiting signal, followed by a brief LCD message, to a 
busy extension. The party receiving the message need only replace the 
handset and then pick...

Chapter 6. SLT Features Section 700 - Operation 
6-18 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
5.  Remain on the line until the called party picks up.
To answer Call Waiting (and disconnect the current call):
1.  Replace the handset.
The current call is disconnected.
2.  Pick up the handset.
You are automatically be connected to the extension sending the Call 
Waiting.
To answer Call Waiting (without disconnecting the current call):
1.  Flash the switchhook.
 The current call is disconnected.
...

Section 700 - Operation Chapter 6. SLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   6-19
Camp-on
(CPC-A 3.1 or higher, CPC-AII, and all Versions of CPC-B)
Description
If you reach a busy extension, you can use the Camp-on feature to alert you 
with a ring when the extension becomes free. You can then pick up your 
handset to automatically dial the extension.
Operation
To activate the Camp-on feature:
1.  Lift the handset. 
2.  Dial the desired extension number.
3.  Upon hearing busy tone,...

Chapter 6. SLT Features Section 700 - Operation 
6-20 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
 A Camp-on request will only be accepted after Call Waiting status. 
 You cannot camp-on to an extension that has call forwarding activated.
 An extension can only have one call camped on at a time. For example, if 
Extension 152 camps on to Extension 153, another extension cannot camp 
on to 153, as long as 152 is camped on.
 An extension that has initiated a camp-on cannot receive a camp-on. For...

Section 700 - Operation Chapter 6. SLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   6-21
To add an outside number (CPC-AII and CPC-B Version 3.1 or 
higher):
1.  Flash the switchhook to place the current call on hold.
2.  Dial a trunk group number (81-86 or 9).
3.  Dial the outside number.
4.  Flash the switchhook when your call is answered.
Related Programming
 FF3 (Extension): Single Line Telephone Hookflash (Brokers Hold/
Conference)
Considerations
 Call Waiting tone can be received...

Chapter 6. SLT Features Section 700 - Operation 
6-22 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
2. Press “0.”
Related Programming
 FF1 (System): Second Attendant Position
 FF1 (System): Third Attendant Position
 FF1 (System): Fourth Attendant Position
 FF1 (System): Attendant Transfer Extension
Dial Tone Disable
(All Versions)
Description
The intercom dial tone can be turned off at an attendant phone. Dial tone is 
turned off when a headset is used.
Operation
To disable the intercom dial tone:...

Section 700 - Operation Chapter 6. SLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   6-23
Direct Trunk Access
(All Versions)
Description
Extensions can access a specific trunk for outgoing calls. Extensions can also 
use Direct Trunk Access to test trunks or to access data trunks.
Operation
1.  Lift the handset. 
2.  Dial “88” followed by the desired trunk number (01-64).
3.  Dial the outside number.
4.  Replace the handset.
Do-Not-Disturb (DND)
(All Versions)
Description
An extension can be...

Chapter 6. SLT Features Section 700 - Operation 
6-24 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
To cancel DND:
1.  Lift the handset. 
2. Dial “73.”
3.  Replace the handset. 
Related Programming
 FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B 
Version 4.0 or higher)
 FF3 (Extension): Extension Class of Service Assignment (CPC-AII and 
CPC-B Version 4.0 or higher)
Considerations
 In CPC-A and CPC-B Versions prior to 5.0, DND and Absence Messages 
cancel Call Forwarding....