Panasonic Digital Business System Section 700 Feature Operation Manual

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-33
 FF2 (Trunks): Pooled Trunk Access for Group “9”
 FF2 (Trunks): Pooled Trunk Access for Groups “81-86”
 FF3 (Extension): Forced Least Cost Routing
 FF8 (LCR): LCR Settings (all)
Considerations
 There are seven groups of outside lines: 9 and 81-86. Some additional 
outside lines may not be assigned to a group.
 Dialing “9” activates LCR if the LCR option is enabled.
Reminder Call
(All Versions)...

Chapter 5. DSLT Features Section 700 - Operation 
5-34 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
3.  Replace the handset or press ON/OFF.
 
Considerations
 A sixteen-second alarm tone will be issued at the specified time.
 One Reminder Call may be set for each telephone.
 To change the Reminder Call, enter a new time.
 If the extension is in use when the reminder call is scheduled, the reminder 
call is sent as soon as the extension becomes available.
Saved Number Redial
(All Versions)...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-35
Considerations
 Any previously saved number is erased when a new number is saved.
 The Saved Number Redial feature can redial a number up to sixteen digits 
long.
 A maximum of five chained Speed Dialing codes can be stored.
Speed Dialing
(All Versions)
Personal Speed Dialing
Description
Extension users can store frequently called numbers using the Personal Speed 
Dial feature. Up to 10 Personal...

Chapter 5. DSLT Features Section 700 - Operation 
5-36 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
 To include a pause, press REDIAL
.
 To include a flash, press FLASH
.
6. Press HOLD
.
7.  Replace the handset or press ON/OFF
.
To delete a Personal Speed Dial number:
1.  Lift the handset or press ON/OFF
. 
2. Press *
.
3. Dial “80.”
4.  Dial the personal speed dial number (90-99 or 900-909).
5. Press HOLD
.
6.  Replace the handset or press ON/OFF
.
7.  To dial a Personal Speed Dial number:
To dial...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-37
 Speed Dialing cannot be checked while Station Lockout is enabled.
 If the Speed Dial is used to forward to an outside number and Least Cost 
Routing is enabled, the Speed Dial cannot use Trunk Group “9.”
System Speed Dial
Description
Frequently called numbers can be stored using the System Speed Dial feature. 
Up to 90 System Speed Dial numbers can be programmed at the Attendant 
Phone and used by...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-38
To activate Station Lockout:
1. Press the ON/OFF
 key.
 The phone issues intercom dial tone.
2. Dial “74.”
3.  Dial the Station Lockout code.
4. Press the ON/OFF
 key.
To deactivate Station Lockout:
1. Press the ON/OFF
 key.
 The phone issues intercom dial tone.
2. Dial “74.”
3.  Dial the Station Lockout code.
4. Press the ON/OFF
 key.
Related Programming
 FF3 (Extensions): Extension Lockout Code...

DBS-2.3/9.2-700 DBS Manual - Revised April 2000  6-1
Chapter 6. SLT Features
This chapter describes features that are available with single-line telephones 
(SLTs). 
Single-line telephones are industry-standard 2500 sets. SLTs are not equipped 
with feature keys or line keys, so basic telephone operations are performed by 
pressing dialpad keys and/or using the switchhook.
This chapter covers the following topics:
Topic Page
Absence Message 6-3
Busy Override 6-5
Call Forwarding 6-6
Call Hold 6-10
Call...

6-2 DBS Manual - Revised April 2000 DBS-2.3/9.2-700 

Section 700 - Operation Chapter 6. SLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   6-3
Absence Message
(All Versions)
Description
SLT users can leave text messages on their phones when they are away.
When the unattended extension is dialed by a key phone, the text message 
appears on the caller’s phone.
One of the following messages can be selected. Messages 5 to 9 can be 
changed through system programming.
Table 6-1.  Absence Messages 
Operation
To Set an Absence Message
1.  Lift the...

Chapter 6. SLT Features Section 700 - Operation 
6-4 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
To Cancel an Absence Message
1.  Lift the handset. 
2. Dial “71.”
3.  Replace the handset.
Related Programming
 FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B 
Version 3.1 or higher)
 FF3 (Extension): Extension Class of Service Assignment (CPC-AII and 
CPC-B Version 3.1 or higher)
 FF6 (Names and Messages): Absence Messages
Considerations
 Extensions without displays get a busy...