Panasonic Digital Business System Section 700 Feature Operation Manual

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-23
3. Press CONF
 when your call is answered.
Considerations
 Press the FLASH
 key to exit a Conference Call.
 The Hold feature cannot be used during a three-party conference.
Dial “0” for Attendant
(All Versions)
Description
The Attendant can be called from any extension by pressing “0.”
If multiple attendants are assigned, dial “0” calls goes to Attendant “1” first. 
If attendant “1” is busy, the call...

Chapter 5. DSLT Features Section 700 - Operation 
5-24 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Dial Tone Disable
(All Versions)
Description
The intercom dial tone can be turned off at a phone. Dial tone is turned off 
when a headset is used.
Operation
To disable the intercom dial tone:
1. Press the ON/OFF
 key.
 The phone issues intercom dial tone.
2. Press “#50.”
3. Press the ON/OFF
 key.
To reactivate dial tone:
Repeat the preceding steps.
Direct Trunk Access
(All Versions)
Description...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-25
Do-Not-Disturb (DND)
(All Versions)
Description
An extension can be made unavailable by activating Do-Not-Disturb (DND). 
Calls to extensions with DND activated receive busy tone.
Operation
To activate DND:
1.  Lift the handset or press ON/OFF
. 
2. Dial “73.”
3.  Replace the handset or press the ON/OFF 
key.
To cancel DND:
1.  Lift the handset or press ON/OFF
. 
2. Dial “73.”
3.  Replace the handset...

Chapter 5. DSLT Features Section 700 - Operation 
5-26 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
routed to the extension defined in permanent call forwarding.
The following types of incoming trunk calls will follow permanent call 
forward settings:
-  Direct trunk calls (including DID/DNIS)
-  Transferred trunk calls.
 The DND feature cannot be activated at an extension selected to receive 
Call Forwarding.
Intercom Calling
(All Versions)
Descriptions
The DBS provides two methods of intercom...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-27
3.  If the system default is voice calling, dial a “1.”
The called extension rings. 
Related Programming
 FF1 (System): Extension Intercom Calling
 FF1 (System): Alert Tone for Voice Calls
 FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B 
Version 4.0 or higher)
 FF3 (Extension): Extension Class of Service Assignment (CPC-AII and 
CPC-B Version 4.0 or higher)
Considerations
...

Chapter 5. DSLT Features Section 700 - Operation 
5-28 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Considerations
 If the Auto Flash Redial feature is set, you can flash the outside line once 
by pressing the REDIAL
 key at the busy tone. The last number dialed can 
then be redialed.
 The Last Number Redial feature can redial a number up to sixteen digits 
long.
 A maximum of five Speed Dialing codes can be redialed.
Meet-Me Answer
(All Versions)
Description
You can answer a Paging call from any...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-29
Message Waiting/Callback Request
(All Versions)
Description
If you call an extension that is busy or does not answer, you can leave a 
message requesting a return call.
Operation
To leave a Message Waiting/Callback Request:
1.  Lift the handset. 
2.  Dial the extension number.
3.  Dial “2” at the busy tone or while the telephone is still ringing.
4.  Replace the handset.
To answer a Message...

Chapter 5. DSLT Features Section 700 - Operation 
5-30 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Related Programming
 FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B 
Version 3.01 or higher)
 FF3 (Extension): Extension Class of Service Setting (CPC-AII and CPC-B 
Version 3.01 or higher)
Considerations
 Up to four Message Waiting/Callback Requests can be sent to one 
extension. 
 If you call an extension a second time and the party answers, a Message 
Waiting/Callback Request...

Section 700 - Operation Chapter 5. DSLT Features
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   5-31
2.  Dial the desired extension number.
3.  Upon hearing busy tone, press “5.”
To transfer a call using OHVA 
1. Press the HOLD
 key.
2.  Dial the number of the extension to which the call will be transferred.
Your phone issues a busy tone if the extension is already on a call.
3.  Press “5” and announce the call to be transferred.
If the transferred call is not accepted by the called extension, press...

Chapter 5. DSLT Features Section 700 - Operation 
5-32 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
 If the transferred call is not answered immediately, it will queue for a 
specified time and then return to the extension sending the OHVA. (The 
recall time is set in the Transfer-Recall Timer.)
 You cannot receive a Call Waiting message during an OHVA. 
 You cannot toggle back and forth between two calls during an OHVA.
Onhook Dialing
(All Versions)
Description
To use onhook dialing, press the...