Panasonic Digital Business System Section 700 Feature Operation Manual

Section 700-Operation Appendix A. EX 1.0 Feature Update
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   Page A-31
Maximum Time Priority Route Tables
DescriptionCPC-EX allows a maximum of 8 Time Priority Route Tables to be used 
during LCR programming. (CPC-AII/B allows a maximum of 16 Time 
Priority Route Tables. This number is reduced with CPC-EX since very 
few systems require more than 3 of these tables and the saved memory 
space will allow for a planned future enhancement.)
The DBS uses Time...

Appendix A. EX 1.0 Feature Update Section 700-Operation
Page A-32 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
 Sync Unit (VB-43563)
 External CSU (not provided by Panasonic)
Setting Modified for ISDN
Programming
See Section 400 - Programming (Appendix C) for more detailed 
programming information.
Modifications to SMDR
DescriptionStation Message Detail Recording (SMDR) provides detailed call records 
of outgoing calls. SMDR records can be output to a printer or an external 
call accounting system....

Section 700-Operation Appendix A. EX 1.0 Feature Update
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   Page A-33
 Figure A-13.SMDR Format for CPC-EX
Setting Modified for SMDR
Values have been redefined for the SMDR Start Timer. The following table shows the 
enhanced values.
Note:
 These values apply to CPC-EX only.
ProgrammingSee Section 400 - Programming (Appendix C) for more detailed 
programming information.
 0         1         2         3         4         5         6         7...

Appendix A. EX 1.0 Feature Update Section 700-Operation
Page A-34 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Related Programming
 FF1 (System): SMDR Print 
 FF1 (System): Parity Check
 FF1 (System): Odd/Even Parity
 FF1 (System): Baud Rate
 FF1 (System): Stop Bit Length
 FF1 (System): Data Length
 FF1 (System): Serial Port Flow Control (X On/ X Off)
 FF1 (System): SMDR Display Start Timer for CO Calls
 FF1 (System): SMDR Printing Mode 1: Outbound, Inbound, Network
 FF1 (System): SMDR...

Section 700-Operation Appendix A. EX 1.0 Feature Update
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   Page A-35
Modification to T1 Signaling Types
DescriptionThe default values for T1 Incoming and Outgoing Signal Types have been 
changed to set “Wink Start” as the default. This will allow easier 
programming of E&M trunks.
Outgoing Signaling Type
Programming
See Section 400 - Programming (Appendix C) for more detailed 
programming information.
Incoming Signaling Type
Programming
See Section 400 -...

Appendix A. EX 1.0 Feature Update Section 700-Operation
Page A-36 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
(This page left blank intentionally) 

DBS-2.3/9.2-700 DBS Manual - Revised April 2000   Page B-1
 Appendix B: CPC-AII/B 8.0 Updates
CPC-AII/B Version 8.0 offers support for the Panasonic 44-Series telephones (VB-44xxx), as 
well as Computer Telephony Integration (CTI) through the Windows™ Telephony 
Applications Processing Interface (TAPI). 

Appendix B. CPC-AII/B 8.0 Feature Update Section 700-OperationPage B-2 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Contents
To p i cPage
44-Series Phone Support B-3
Enhanced Phone Features   
B
-4
Directory Mode   
B
-8
Variable Mode   
B
-9
Handset Mute  
B
-1 1
Off-Hook Monitoring   
B
-12
Separate Speaker Volumes for Internal vs. CO calls   
B
-12
Analog Adapter  
B
-13
MSG (Message) Key   
B
-15
DSS/72 Console - Key Arrangement   
B
-16
EM/24 - Key Arrangement  
B
-19
Modification to Toll...

Section 700-Operation Appendix B. CPC-AII/B 8.0 Feature Update
DBS-2.3/9.2-700 DBS Manual - Revised April 2000   Page B-3
44-Series Phone Support
CPC-AII/B Version 8.0 provides full support for Panasonic’s 44-Series phones (VB-44xxx).  
Table D-1, below, lists all 44-Series phone models and their part numbers. Most models are 
available in two colors: gray and black.
Table B-1.44-Series Phones 
16-Key Phone  (gray) VB-44210G
16-Key Phone  (black) VB-44210B
16-Key Speakerphone  (gray only) VB-44211G...

Appendix B. CPC-AII/B 8.0 Feature Update Section 700-Operation
Page B-4 DBS Manual - Revised April 2000 DBS-2.3/9.2-700
Enhanced Phone Features
Enhanced DBS features that can be executed on the 44-Series phones are described below:
Note:
The features introduced with these phones are supported by CPC-AII/B Version 
8.0, CPC-S/M Version 2.0, and CPC-EX Version 1.0. You can also use the 44-
Series phones with previous DBS versions, but the enhanced features won’t be 
supported.
 Figure B-14.44-Series...