OKI MC560n User Manual

Configuring your machine.... > 41
System configuration menu
ITEMCHOICEDESCRIPTION
Pow Save Time 5
15
30
60
240Adjusts the idling time before the printer 
automatically switches into power saving 
mode. In this mode power consumption is 
reduced to a low level required to just keep 
the printer operating and ready to receive 
data. When a job is sent the MFP will require 
a warm-up time of up to 1 minute before 
printing can begin.
PersonalityAUTO 
EMULATION
PCL
IBM PPR III XL
EPSON FX
PS3 EMULATIONThis...

Configuring your machine.... > 42
PCL emulation
ITEMCHOICEDESCRIPTION
Font SourceRESIDENT / 
RESIDENT 2Specifies the location of the PCL default 
font. Normally this will be INTERNAL 
unless additional fonts are installed in the 
expansion ROM slot or additional fonts 
have been downloaded to RAM as 
permanent fonts.
Font No.I0~I89 Sets the current default font number from 
the currently selected source, which could 
be internal (I), ROM slot (C) or 
downloaded (S).
Font Pitch 0.44 CPI~10.00 
CPI~99.99...

Configuring your machine.... > 43
PPR emulation
ITEMCHOICEDESCRIPTION
Character Pitch10 CPI; 12 CPI; 17 
CPI; 20 CPI; 
PROPORTIONALSpecifies character pitch in IBM PPR 
emulation.
Font Condense12CPI - 20CPI; 
12CPI - 12CPISpecifies 12CPI pitch for Condense 
Mode.
Character Set SET 1; SET 2Specifies a character set.
Symbol Set IBM 437 Specifies a symbol set.
Letter 0 StyleDISABLE
ENABLESpecifies the style that replaces 9BH 
with letter o and 9DH with a zero
Zero CharacterNORMAL
SLASHEDSets the zero to be...

Configuring your machine.... > 44
FX emulation
USB menu
ITEMCHOICEDESCRIPTION
Character Pitch10 CPI; 12 CPI; 17 
CPI; 20 CPI; 
PROPORTIONALSpecifies character pitch in this 
emulation.
Character Set SET 1 / SET 2Specifies a character set.
Symbol Set IBM 437 Specifies a symbol set.
Letter 0 StyleDISABLE
ENABLESpecifies the style that replaces 9BH 
with letter o and 9DH with a zero
Zero CharacterNORMAL
SLASHEDSets the zero to be slashed or 
unslashed.
Line Pitch6 LPI / 8 LPI Specifies the line spacing....

Configuring your machine.... > 45
Maintenance menu
Usage menu
ITEMCHOICEDESCRIPTION
Menu Reset EXECUTE Resets menus to default settings.
Save Menu EXECUTE Saves current menu settings as default 
values. At confirmation prompt, press 
ENTER to confirm save, or CANCEL to 
cancel.
Power SaveENABLE DISABLE Enables or disables automatic power save 
mode. Delay before entering this mode is 
set in the system configuration menu.
Paper Black 
Setting–2~0~+2 Used for small adjustment when you 
experience faded...

Configuring your machine.... > 46
Job log menu
NOTE
Access to this menu is password restricted. 
ITEMCHOICEDESCRIPTION
Enter Password nnnn Input a password to enter the Print 
Statistics menu.
The default password is “0000” (four 
zeros).
Note: Job Log Menu category is not 
shown when Print Statistics function is 
not supported.
Job Log ENABLE
DISABLEPrints a list of jobs carried out on this 
MFP.
Log Size 1~30~100 Specifies the maximum number of data 
retained for printing data history.
If the total...

Configuring your machine.... > 47
EXPLANATION OF FILING PROTOCOLS
FTP 
FTP stands for “File Transfer Protocol.” It is a common method of transferring files via the 
Internet from one computer to another. FTP use RFC 959[FTP] as their protocol. Therefore, 
ensure you have a legal FTP account with the privilege of writing under the directory to save 
the files and password before using FTP to save documents. To add a sub-directory from 
the MFP, you need to have the privilege of adding a new directory....

Configuring your machine.... > 48
Setting IIS anonymous access:
1.Start Internet service manager in “Control Panel”.
2.Select Default Web site and right click C:\Inetpub\wwwroot\X cabinet.
3.Select Properties.
4.In the X cabinet dialogue box, select the Directory security tab, and click Edit for 
Anonymous Access and Authentication Control”. Make sure “Anonymous Access” is 
selected in the “Authentication Methods” dialogue box.
5.Click Edit to open “Account for anonymous access”.
NOTE
Make sure that the...

Configuring your machine.... > 49
Setting IIS privileged access:
1.As in “Setting IIS anonymous access”, start “Internet service manager” and select 
Default Web site. Right click C:\Inetpub\wwwroot\X cabinet, and select Properties.
2.Select the Directory tab on the Properties page. Ensure the privileges for “Read”, 
“Write” and “Directory Browsing” are selected.
After that every user has the privilege to manage all files in the directory for saving files.
When using Apache as HTTP server, according to t...

Configuring your machine.... > 50
SETTING THE FAX FACILITY
INITIAL SET UP
The following parameters must be set before using the fax function on your MFP:
>Date and time
>Country code
>Station ID and number
There are other parameters that can be adjusted to suit your personal preferences later if 
required, refer to fax set up table for details (see “Fax settings” on page 30).
To set fax parameters:
1.Press the Menu button to prompt the menu settings screen.
2.Using the UP arrow key, navigate to...