Nortel Modular Ics 6.0 System Coordinator Guide

ISDN PRI and BRI / 201
P0992640 03 Modular ICS 6.0 System Coordinator Guide
ISDN BRI features
Selected ISDN network features can be used from a Norstar 
telephone. Your central office switch (ISDN network) 
determines which features are available to you.
Network Name Display for BRI
Your Norstar system displays the name of an incoming call 
when it is available from the service provider. Name 
information can be displayed on a Norstar set but not on an 
ISDN terminal. If the Calling Party Name has the...

202 / ISDN PRI and BRI
Modular ICS 6.0 System Coordinator Guide P0992640 03
Name and number blocking for BRI
When activated, ²¡Úá allows you to block the 
outgoing name and/or number on a per-call basis. Name and 
number blocking can be used with a Norstar set but not with 
an ISDN terminal.
Consult your customer service representative to determine 
whether or not this feature is compatible with your service 
provider.
Service provider features
Consult your customer service representative to determine if...

ISDN PRI and BRI / 203
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Canceling Call Forward
1. Select an ISDN line by selecting a line button, a line pool, 
or the Handsfree button, or by lifting the handset (if an 
ISDN line is your prime line).
2. Consult your service provider for the appropriate feature 
code to enter on your dialpad. Listen for a series of tones.
3. Press ¨.
Calling the number your calls are forwarded to
1. Select an ISDN line by selecting a line button, a line pool, 
or the...

204 / ISDN PRI and BRI
Modular ICS 6.0 System Coordinator Guide P0992640 03
MCID
The MCID feature allows you to enter ²¡áà to have 
call information recorded on the central office system for an 
incoming call on a specific line (ETSI EURO ISDN lines, 
only).
The user must invoke the feature code either during the active 
call or within within 30 seconds (time varies on different 
networks) after the caller hangs up, but before the user hangs 
up.
MCID prompts
Network Call Diversion
This feature is a...

ISDN PRI and BRI / 205
P0992640 03 Modular ICS 6.0 System Coordinator Guide
on which they arrive. Call forward is efficient since there is no 
need for additional outside lines.
ISDN BRI terminals
Your Modular ICS allows connection of eight Basic Rate 
Access loops (four 2B+D channels) that can be used for fully 
digital connections to ISDN networks and devices. Loops are 
connections between the ICS and devices or between the ICS 
and the network.
Each loop provides two separate B-channels that can be...

206 / ISDN PRI and BRI
Modular ICS 6.0 System Coordinator Guide P0992640 03
Telecommuting
Convenient retrieval, processing and storage of files is 
possible for the employee working at home by using ISDN 
lines to give high-speed access to information resources at the 
office.
Group 4 fax
ISDN fax applications save money by increasing both 
transmission speed and the quality of resolution.
Remote LAN access
ISDN provides an affordable and fast means for employees at 
remote sites (at home or branch...

P0992640 03 Modular ICS 6.0 System Coordinator Guide
Using System features
Using alternate or scheduled services
There are three types of Services to make your Norstar system 
handle calls differently on different days and at different times 
of the day: Ringing service, Restriction service and Routing 
service.
Each of the three services, and the six schedules available to 
each service, are customized for you by your installer or 
customer service representative. They program which 
telephone is used...

208 / Using System features
Modular ICS 6.0 System Coordinator Guide P0992640 03
Changing the lines used by outgoing calls
Routing service allows you to assign alternate routes to calls. 
In this way you can take advantage of lower costs available on 
particular routes on certain days and at certain times. Both the 
regular and alternate routes are programmed by your installer 
or customer service representative.
Turning Services on and off
The master control for how different services and their...

Using System features / 209
P0992640 03 Modular ICS 6.0 System Coordinator Guide
4. Press ≠ at Services.
5. Press ‘ until you see the Service you want to 
program.
6. Press ≠ and ‘ until you see the 
schedule you want to program.
7. Press ≠ and use CHANGE
 to select the setting that 
works best for your office: Off, Manual or Automatic.
Each schedule can have its own configuration of a Service 
which works independently of automatic start and stop times. 
For example, there may be a version of...

210 / Using System features
Modular ICS 6.0 System Coordinator Guide P0992640 03
4. Press ≠ at Services. The display reads 
Ringing Serviceˆ.
5. Press ≠. The display reads Sched:Nightˆ.
6. Press ≠ and use CHANGE
 to set the Service to 
Manual.
Night Schedule for Ringing Service no longer follows the 
schedule but can be turned on and off by using the feature code 
and selecting Night Ringing. See Turning Services on and off 
using feature codes on page 210.
Turning Services on and off using feature...