Home > Nortel > Communications System > Nortel Modular Ics 6.0 System Coordinator Guide

Nortel Modular Ics 6.0 System Coordinator Guide

Here you can view all the pages of manual Nortel Modular Ics 6.0 System Coordinator Guide. The Nortel manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 211

Using System features / 211
P0992640 03 Modular ICS 6.0 System Coordinator Guide
3. Press N E X T to move through the schedules until the display 
shows the version of the service you want to be turned on.
4. Press OK
 to select the setting, or press QUIT to exit the 
feature without making any changes.
To turn a Service off:
1. Enter the appropriate feature code from a control 
telephone.
2. For Restriction and Routing service you have to enter the 
System Coordinator or Basic password.
Viewing the...

Page 212

212 / Using System features
Modular ICS 6.0 System Coordinator Guide P0992640 03
Viewing the active Services on a one-line display
1. Press ²¡àâ. The display shows the first active 
Service.
2. Press £ to move through the active schedule.
3. Press ¨ to exit.
Displays
You are viewing the active Services. Press 
£ or NEXT to see  the other active 
Services. Press 
¨ or EXIT to quit.
The name of the current Restriction 
service schedule displays. Press
 £ or 
NEXT
 to see the other Ringing service...

Page 213

Using System features / 213
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Services that have been turned on automatically are indicated 
by an asterisk (*) before the name on the display. You can 
neither manually activate nor cancel scheduled services, 
although you can override them by manually turning on 
another schedule.
The control telephone can override Services that are turned on 
and off according to a schedule at any time by entering a 
Services feature code, and selecting a different...

Page 214

214 / Using System features
Modular ICS 6.0 System Coordinator Guide P0992640 03
Using passwords
Your passwords prevent unauthorized or unintentional 
changes to your Norstar system. To keep your telephone 
service secure, distribute the password only to selected 
personnel or make use of the basic password described below. 
Record your password in a secure place and change it 
periodically.
If you forget the administration or basic passwords, you 
cannot do any programming. Call your customer service...

Page 215

Using System features / 215
P0992640 03 Modular ICS 6.0 System Coordinator Guide
You can enter the Basic password after the following feature 
codes:
²¥¥ èêäå to access User Preferences) 
² ¥¥æé÷ä to change the system time and 
date)
Because the Basic password can be used to change the time, 
you should give it out with care and change it when necessary, 
for example, when an employee leaves the company. If 
restrictions, routing or other services operate on a schedule, 
changing the time can allow...

Page 216

216 / Using System features
Modular ICS 6.0 System Coordinator Guide P0992640 03
7. Press ‘ until you see the name of the password 
you want to change.
8. Use ≠, CHANGE
 and the dialpad to enter the new 
password. Press OK
 to accept the new password.
You cannot erase or eliminate the ability to program 
passwords. 
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can 
clear it in programming. The individual can then enter a new 
password from his or her telephone....

Page 217

Using System features / 217
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Hospitality password
There are two passwords within the Hospitality feature. One 
provides secure access to the administration set for 
programming the service, and one provides secure access to a 
room condition setting from each room set for housekeeping 
staff.
Desk pswd
Change this password frequently, to maintain security.
At 
Hospitality:
1. Press ≠.
2.Desk pswd:4677 displays.
3. Press CHANGE
. 
4.New pswd: displays
5....

Page 218

218 / Using System features
Modular ICS 6.0 System Coordinator Guide P0992640 03
Using special telephones
Direct-dial 
You can reach the direct-dial telephone by dialing a single 
digit. The direct-dial telephone is usually in a central location, 
such as at the desk of an administrative assistant or attendant. 
You can have up to five direct-dial telephones for your Norstar 
system. It is usually the prime telephone or the central 
answering position (CAP).
The direct-dial telephone can send up to 30...

Page 219

Using System features / 219
P0992640 03 Modular ICS 6.0 System Coordinator Guide
4. Enter the internal number of the telephone you want to 
program and press ≠. The display reads 
Capabilities.
5. Press ≠.
6. Press ‘ until the display reads D-Dial.
7. Press CHANGE
 to select  Set1, Set2, Set3, Set4, Set5 or 
None.
Any number of telephones can be assigned to call the 
direct-dial telephone.
Hotline
A hotline telephone calls a preset internal or external 
telephone number when you pick up the receiver (or...

Page 220

220 / Using System features
Modular ICS 6.0 System Coordinator Guide P0992640 03
Telephone Feature Card or see Changing how you dial your 
calls on page 73.
Making a telephone a hotline telephone
You can set up a telephone as a hotline. 
You need the programming template found at the front of this 
guide. See Getting started with Norstar on page 13 for more 
information.
1. Press ²¥¥ÛßßÜÝÝ.
2. Press ÛÜßÝß (the default System Coordinator 
password).
3. Press ≠ at Terminals&Sets.
4. Enter the internal...
Start reading Nortel Modular Ics 6.0 System Coordinator Guide

Related Manuals for Nortel Modular Ics 6.0 System Coordinator Guide

All Nortel manuals