Home > Nortel > Communications System > Nortel Modular Ics 6.0 System Coordinator Guide

Nortel Modular Ics 6.0 System Coordinator Guide

Here you can view all the pages of manual Nortel Modular Ics 6.0 System Coordinator Guide. The Nortel manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 261

Glossary / 261
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Page Time out: A setting that 
controls how long a Page 
Announcement can last. It can be 
assigned under 
Feature settings in 
Sys prgrmmng.
Page zone: An area in the office that 
receives internal page announcements 
independently of the rest of the office.
Each page zone is identified by a 
number. Telephones are assigned to 
page zones under 
Capabilities in 
Terminals&Sets programming.
Park prefix: See Call park prefix.
Park...

Page 262

262 / Glossary
Modular ICS 6.0 System Coordinator Guide P0992640 03
Privacy: This feature determines 
whether a Norstar user may select a line 
in use at another telephone and join an 
established call. 
Privacy is enabled 
under 
Trunk/Line data in Lines 
programming, but can be turned on and 
off by users during individual calls.
Private line: See Private to.
Private Monitoring This feature 
allows a user with a two-line display 
telephone that has been designated as a 
supervisor telephone, to monitor...

Page 263

Glossary / 263
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Remote access: The ability to dial 
into a Norstar system from outside the 
system and make use of selected Norstar 
features. The lines,  features, and dialing 
capabilities available to a remote user 
are determined by the Class of Service. 
If the remote access line is answered 
with DISA, the user must enter a Class 
of Service password to gain access to 
the Norstar system features.
remote access dial restriction:  
See Remote...

Page 264

264 / Glossary
Modular ICS 6.0 System Coordinator Guide P0992640 03
systems linked in a network, routing can 
create a transparent or coordinated 
dialing plan. It can also be used to direct 
calls to the least expensive lines 
according to a Services schedule 
(sometimes called least cost routing). 
Run/Stop: 
²¥áA feature that creates a break point in a 
programmed external dialing sequence. 
When you press a programmed key, the 
system dials the number up to the run/
stop. When you press it again, the...

Page 265

Glossary / 265
P0992640 03 Modular ICS 6.0 System Coordinator Guide
System coordinator password:  A 
one- to six-digit password that prevents 
unauthorized access to programming. 
The System coordinator password can 
be assigned and changed in Passwords 
programming. 
System coordinator plus:  A 
system coordinator who also performs 
technical and maintenance functions for 
the Norstar system.
System coordinator plus 
password:  A one- to six-digit 
password that prevents unauthorized 
access to...

Page 266

266 / Glossary
Modular ICS 6.0 System Coordinator Guide P0992640 03
Telco features:  A programming 
section that allows you to specify the 
external telephone numbers that are 
dialed by the Message feature to retrieve 
voice messages, or to set up CLASS 
(CMS)  services for  lines and sets. Telco 
features are accessed by an installer or a 
system coordinator plus.
Terminal equipment (TE):   A 
generic term for devices that connect to 
an ISDN network. Examples of ISDN 
TE are ISDN telephones, computers...

Page 267

Glossary / 267
P0992640 03 Modular ICS 6.0 System Coordinator Guide
V
Voice Call: ²ßß
A feature you can use to make an 
announcement or begin a conversation 
through the speaker of another 
telephone in the Norstar system. The 
telephone you call will not ring. Instead, 
the person you call  will hear a beep and 
then your voice. Their telephone will 
beep periodically to remind them that 
their microphone is open.
Voice Call deny: 
²¡¡
A feature that prevents your telephone 
from receiving Voice Calls....

Page 268

268 / Glossary
Modular ICS 6.0 System Coordinator Guide P0992640 03 

Page 269

P0992640 03 Modular ICS 6.0 System Coordinator Guide
Index
Symbols
§ Long Distance symbol
 247
²
Autobumping
canceling (#815)
 131
enable (815)
 131
autodial button
external (*1)
 79
internal (*2)
 79
autodial button, external (*0)
 81
Background Music
canceling (#86)
 193
turning on (86)
 193
Button Inquiry (*0) 86, 237, 244
Call Forward
canceling (#4)
 105
using (4) 105
Call Information (811)
 49
Call Log
entering (812)
 133
options (*84)
 130
password (*85)
 133, 134
viewing (812) 131
Call Park (74)...

Page 270

270 / Index
Modular ICS 6.0 System Coordinator Guide P0992640 03
turning on (873) 210
Services, viewing (870)
 212
Speed Dial
adding user (*4)
 84
making calls (0)
 83
Static Time and Date (806) 126
Testing
display (805)
 244
power supply (805) 246
telephone buttons (805)
 245
telephone handset (805)
 245
telephone headset (805) 245
telephone speaker (805)
 246
Time (803)
 67
Time and Date (**TIME) 29, 215
Trunk Answer (800)
 55
User Preferences (**USER)
 155, 215
Voice Call (66)
 126
Voice Call Deny...
Start reading Nortel Modular Ics 6.0 System Coordinator Guide

Related Manuals for Nortel Modular Ics 6.0 System Coordinator Guide

All Nortel manuals