Nortel Compact Ics 6.0 System Coordinator Guide

Getting started with Norstar / 21
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
services on and off. For more information, see ‘‘Using 
passwords’’ on page 202.
Customize the many features used by telephones. 
You can change where a call is forwarded, give a 
telephone a name, or allow certain features to be 
used at a telephone.
Program names for each line.
Turn services on or off. These are Ringing service, 
(often called night service) that allows additional 
telephones to ring, Restriction...

22 / Getting started with Norstar
Com pact ICS 6.0 System Coordinator Guide P0992670 03
Programming map (page 1)
Terminals & 
SetsShow set
Enter digits 
or press 
LIST.Ca pa bil itie s Fwd no answer Fwd to
Fwd delay
Fwd on busy Fwd to
Fwd delay
DND on busy Fwd to
Handsfree
HF answer back
Pickup grp
Page zone
Paging
D-Dial
Priority call
Hotline Intrn #
Extrnl# .... Use 
prime line
Aux. ringer
Allow redirect
Redirect ring
SM Supervisor
Name
User prefernces Model
Button progrming # of buttons
B01 ... BXX...

Getting started with Norstar / 23
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Programming map (page 2)
Lines Show lines ___
Enter digits or 
press LISTName
Services Ringing service Sched:  Night
Evening
Lunch
Sched 4
Sched 5
Sched 6Off, Manual, 
Auto
Restrn services Sched: Night
Evening
Lunch
Sched 4
Sched 5
Sched 6Off, Manual, 
Auto
Routing service Sched: Night
Evening
Lunch
Sched 4
Sched 5
Sched 6Off, Manual, 
Auto
Sys speed 
dialSpee d dia l #
Enter digits or 
press LISTadd/change tel #
Use...

24 / Getting started with Norstar
Com pact ICS 6.0 System Coordinator Guide P0992670 03
Programming map (page 3)
Starting and ending a session
As system coordinator, the first steps in making any change to the 
Norstar system are always the same. 
System 
Prgrming 
(continued)Auto 
AttendantAttd set
Language First/Second
System Answer After__rings
CCR After__ rings
CCR groupsShow group:
Enter digits or 
press List
BusName
Hospitality Room/desk info Show set Room #
Adm pwd req’d
Service time Hour
Minutes...

Getting started with Norstar / 25
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Ending a session
The system goes ahead with any changes you make to 
programming as soon as you move away from a setting, either by 
using the navigation buttons or 
¨.
You can see if the changes you have made to telephone 
programming have taken effect by pressing the UPDATE
 display 
key. The display shows you how many telephones have not been 
updated.
Press DNs
 to see the specific extensions where programming...

26 / Getting started with Norstar
Com pact ICS 6.0 System Coordinator Guide P0992670 03 

Frequently used programming operations / 27
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
Frequently used programming 
operations
The following sections highlight the most frequently used 
programming operations. To consult these or other programming 
operations, see either the Table of Contents or the Index .
Changing the time and date on the display 
Entering letters and numbers using the dialpad
Press ².
Press ¥¥¡ÝßÜ (which is the same 
as
¥¥æé÷ä).
PressÛÛàÝÛ ( ) or 
ÛÜßÝß ()
The passwords...

28 / Frequently used programming operations
Com pact ICS 6.0 System Coordinator Guide P0992670 03
In this example, you are changing the time to 1:30 p.m.
Press CHANGE.
Press the dialpad buttons to enter the hour. Use 
two digits for all hours. The clock on the display 
shows either one or two digits.
The display prompts you to choose a.m. or p.m. 
Press 
CHANGE and OK to select p.m.
Press NEXT.
Press CHANGE.
Press the dialpad buttons to enter the minutes.
If you are only changing the time and not the...

Frequently used programming operations / 29
P0992670 03 Compact ICS 6.0 Syste m Coordin ator Guide
The clock controls the schedules used for services such as ringing 
and routing services.
After a power failure, the clock is behind by the length of time 
power was lost. For example, if the power is out for two minutes, 
the clock is two minutes behind. 
Adding or changing a system speed dial
You program a speed dial on your Norstar so that anyone in your 
office can dial a frequently used number using a...

30 / Frequently used programming operations
Com pact ICS 6.0 System Coordinator Guide P0992670 03
Choose a speed dial code 
Add or change the telephone number
Select a line for the speed dial code  
Press ÛÜßÝß.
Press ‘ three times.
Press ≠.
Press ââÚ.
You can pick any system speed dial code between 0 01 and 255.
Press ≠.
Press CHANGE.
Use the dialpad to program the telephone number 
that you want to add. The telephone number can 
be up to 24 digits long. 
Your display shows the telephone number, and...