Nitsuko Ds2000 Software Manual

Key Ring
DS2000 Software ManualChapter 1: Features173
Program 1003 - Direct Termination (Night) (page 426)
Press CLEAR to assign the trunk to Key Ring in the night mode.
Program 1003 - Activate Overflow at Night (page 427)
Enter Y if unanswered night mode calls on trunk should route to the night overflow destina-
tion. Enter N if unanswered calls should stay at Key Ring.
Program 1003 - Night Overflow Destination (page 427)
Enter the extension, Ring Group, UCD Group master number or Voice Mail master number...

Last Number Redial
174Chapter 1: FeaturesDS2000 Software Manual
Last Number Redial
Description
Last Number Redial allows an extension user to quickly redial the last outside number dialed. For 
example, a user may quickly recall a busy or unanswered number without manually dialing the dig-
its. Last Number Redial saves in system memory the last 32 digits a user dials. The number can be 
any combination of digits 0-9, # and *. The system remembers the digits regardless how whether 
the call was answered,...

Last Number Redial
DS2000 Software ManualChapter 1: Features175
Other Related Features
Central Office Calls, Placing (page 63)
Users can easily redial the last outside number dialed.
Intercom (page 165)
Last Number Redial cannot redial Intercom calls.
Save Number Dialed (page 254)
Save also simplifies dialing important numbers.
Trunk (Line) Queuing / Trunk Callback (page 332)
If all trunks are busy and Last Number Redial cannot go through, the user can dial 2 a queue 
for a trunk to become free. If the...

Line Keys
176Chapter 1: FeaturesDS2000 Software Manual
Line Keys
Description
A line key provides an extension user with one-button access to trunks. The extension user just 
presses a line key to place or answer a call on the trunk. There is no need to dial codes to access or 
intercept trunk calls. In addition, a line key provides a Busy Lamp Field (BLF) for the trunk to 
which it is assigned (see the table below).
Answering Priority
When multiple calls ring an extension simultaneously, the system...

Line Keys
DS2000 Software ManualChapter 1: Features177
Programming Guide
Programming List
Program 1701 -  Line Key (page 436)
Assign a programmable key as a line key (code 03). The option is 01-16 (trunk 1-16). Step-by-step guide for setting up Line Keys
Step 1: Should extension have a line key for the trunk?
• In Program 1701 - Line Key (page 436), assign a 
key as a line key (code 03). The option is 01-16 
(trunks 1-16).
• In Program 1701 - Line Key (page 436), do not 
assign a key as a line key (code...

Line Keys
178Chapter 1: FeaturesDS2000 Software Manual
Program 1802 - Key Access to Outbound Lines (page 457)
Enter Y to enable or N to disable key access to outbound lines.
Program 1803 - Extension Line Access Assignments (page 461)
For each extension, assign the access options for each trunk (0 = No access, 1 = Incoming 
only. 2 = Outgoing only, 3 = Full access).
Program 1805 - Ring Assignments (page 466)
Assign ringing for each trunk at each extension (1 = Lamp only [day and night], 2 = Ringing 
day...

Loop Keys
DS2000 Software ManualChapter 1: Features179
Loop Keys
Description
Loop keys are programmable keys that simplify the way extension users place and answer outside 
calls. There are two types of loop keys: Switched Loop Keys and Fixed Loop Keys.
Switched Loop Keys
For incoming calls, Switched Loop Keys provide an appearance for any trunk not  assigned to a line 
key for which the extension has access and ringing. Switched Loop Keys insure that there is a 
visual appearance for trunks that do not...

Loop Keys
180Chapter 1: FeaturesDS2000 Software Manual
Programming Guide
Step-by-step guide for setting up Loop Keys
Step 1: Should extension have a Switched Loop Key?
• In Program 1701 - Switched Loop Key 
(page 436), assign a key as a Switched Loop Key 
(code 01).
• In Program 1701 - Switched Loop Key 
(page 436), do not assign a key as a Switched 
Loop Key (code 01).
Step 2: Should extension be able to use Switched Loop Key for answering outside calls?
• In Program 1803 - Extension Line Access...

Loop Keys
DS2000 Software ManualChapter 1: Features181
Programming List
Program 1002 - Trunk Groups (page 424)
Assign trunks to trunk groups.
Program 1701 -  Switched Loop Key (page 436)
Assign a programmable key on an extension as a Switched Loop Key (code 01).
Program 1701 -  Fixed Loop Key (page 436)
Assign a programmable key on an extension as a Loop Key (code 02). You make a separate 
assignment for inbound and outbound. The options are 00-08 (Trunk Groups 0-8).
Step 4: Should extension have Fixed...

Loop Keys
182Chapter 1: FeaturesDS2000 Software Manual
Program 1803 - Extension Line Access Assignments (page 461)
For each extension, assign the access options for each trunk (0 = No access, 1 = Incoming 
only. 2 = Outgoing only, 3 = Full access).
Program 1805 - Ring Assignments (page 466)
Assign ringing for each trunk at each extension (1 = Lamp only [day and night], 2 = Ringing 
day and night, 3 = Night Ring only, lamp during the day, 4 = Delay ring day and night).
Other Related Features
Automatic...