Nitsuko Ds2000 Software Manual

Interactive Soft Keys
DS2000 Software ManualChapter 1: Features163
Interactive Soft Keys
Description
Interactive Soft Keys provide intuitive feature access. It is no longer necessary to remember feature 
codes to access the telephone’s advanced features because the function of the soft keys change as 
the user process calls. For example, while on a trunk call a display keyset user can press the PARK 
soft key to Park their call in orbit.
For additional information on Interactive Soft Key operation,...

Interactive Soft Keys
164Chapter 1: FeaturesDS2000 Software Manual
Programming List
Program 0101 - Soft Keys (page 365)
Enable (Y) or disable (Y) an extension’s soft keys.
Program 1801 - Extension Class of Service Assignment (page 450)
Assign Class of Service to extensions.
Other Related Features
None
Feature Operation
Once enabled, Interactive Soft Key operation is automatic. See the Soft Key Glossary (P/N 
80000GLO**) for the specifics. 

Intercom
DS2000 Software ManualChapter 1: Features165
Intercom
Description
Intercom gives extension users access to other extensions. This provides the system with complete 
internal calling capability.
Handsfree Answerback and Forced Intercom Ringing
Handsfree Answerback permits an extension user to respond to a voice-announced Intercom call by 
speaking toward the phone, without lifting the handset. Like Handsfree, this is a convenience for 
workers who don’t have a free hand to pick up the handset....

Intercom
166Chapter 1: FeaturesDS2000 Software Manual
Step 2: Should Intercom calls voice-announce system-wide?
• In Program 0201 - Voice-Announced Intercom 
Calls (page 367), enter Y to allow Intercom calls 
to voice-announce system-wide. Users can still 
dial 1 to have their calls ring.
• In Program 1807 - Station Voice Announced 
Intercom Calls (page 469), enter Y to enable 
voice-announced intercom calls for specific 
extensions. The User-Programmable Options #
IV 
(#48) and #
IR (#47) locally...

Intercom
DS2000 Software ManualChapter 1: Features167
Programming List
Program 0201 - Handsfree Reply on Intercom Calls (page 367)
Enter Y to allow extension user to respond to voice-announced Intercom calls by just speaking 
toward the phone (i.e., by using Handsfree Answerback). When you enter N, the extension 
user must lift the handset to speak.
Program 0201 - Voice-Announced Intercom Calls (page 367)
Enter Y to enable voice-announced Intercom calls system-wide. If disabled, all Intercom calls 
ring...

Intercom
168Chapter 1: FeaturesDS2000 Software Manual
Names for Extensions and Trunks (page 198)
Extension names help identify Intercom callers to co-workers.
Off-Premise Extensions / On-Premise SLT Extensions (page 207)
All Intercom calls to On- and Off-Premise Extensions ring.
Ringdown Extension (page 249)
Ringdown Extension follows the voice-announce status of destination extension. For exam-
ple, if an extension usually voice-announces Intercom calls, a ringdown to that extension will 
also...

Intercom
DS2000 Software ManualChapter 1: Features169
To answer an Intercom call (if you hear ringing):
1. Lift the handset.Intercom ringing.
ICM flashes. 

Key Ring
170Chapter 1: FeaturesDS2000 Software Manual
Key Ring
Description
A Key Ring trunk rings an extension according to the settings in Program 1805 - Ring Assign-
ments (page 466). Multiple extensions can be enabled to ring immediately or after a programmed 
delay for each incoming trunk call. In addition, under certain conditions other types of trunk calls 
divert to Key Ring if unanswered. The following conditions also initiate Key Ring:
Direct Inward Line
An unanswered DIL diverts to Key Ring...

Key Ring
DS2000 Software ManualChapter 1: Features171
Programming Guide
Step-by-step guide for setting up Key Ring 
(Page 1 of 2)
Step 1: Should extension have Key Ring for trunk?
• In Program 1805 - Ring Assignments (page 466), 
- Enter 2 for day & night Key Ring,
- Enter 3 for night only Key Ring,
- Enter 4 for delayed day & night Key Ring.
• To ensure that a trunk will always have a ring des-
tination, consider making at least one extension in 
the system type 2 for all trunks.
• In Program 1805 -...

Key Ring
172Chapter 1: FeaturesDS2000 Software Manual
Programming List
Program 0401 - Transfer Recall (page 375)
This interval sets how long a call will ring the day or night overflow destination before divert-
ing to key ring.
Program 0401 - Trunk Revert (page 376)
This interval sets how long a call will ring a call will ring its initial day or night mode destina-
tin before routing the the programmed overflow destination.
Program 1003 - Direct Termination (Day) (page 426)
Press CLEAR to assign the trunk...