Nitsuko Ds2000 Software Manual

Loop Keys
DS2000 Software ManualChapter 1: Features183
Feature Operation
To answer a call on a Loop Key:
1. Lift handset.
2. Press Switched Loop Key.
To place a call on a Loop Key:
1. Lift handset.
2. Press Loop Key.
3. Dial trunk group code (0-8).
4. Dial outside number.Trunk ringing.
Loop Key flashing (red).
Conversation with caller.
Loop Key on (green).
Intercom dial tone.
Loop Key on (green).
Trunk dial tone.
Loop Key on (green). 

Meet-Me Conference
184Chapter 1: FeaturesDS2000 Software Manual
Meet-Me Conference
Description
With Meet-Me Conference, an extension user can set up a telephone meeting with their co-workers. 
Each party joins the Converence by dialing a Meet Me Conference code. Meet Me Conference lets 
extension users have a telephone meeting — without leaving the office. Users must join the meeting 
within the Meet-Me Conference interval.
The system has two Meet-Me Conference codes (#11 and #12). After a Meet-Me...

Meet-Me Conference
DS2000 Software ManualChapter 1: Features185
Programming Guide
Programming List
Program 0401 - Meet-Me Conference (page 375)
When a user initiates a Meet-Me Conference, the system waits this interval for the Paged 
party to join the call.
Other Related Features
The following features also allow different types of multiple party calls:
Barge In (Intrusion) (page 37)
Conference (page 79)
Group Listen (page 142)
Privacy (page 226)
Tandem Trunking / Unsupervised Conference (page 307)...

Meet-Me Conference
186Chapter 1: FeaturesDS2000 Software Manual
2. Do not hang up.
3. Press 
ICM.
4. Dial announced Meet-Me Conference code (#11 or #12).
Your co-worker’s must join the telephone meeting within the Meet Me Conference 
time.
To join a Meet-Me Conference:
1. Listen for paged invitation to join the Conference.
2. Press 
ICM.
3. Dial announced Meet-Me Conference code (#11 or #12).
You can join the telephone meeting within the Meet Me Conference time.Intercom dial tone.
ICM on (red)....

Message Waiting
DS2000 Software ManualChapter 1: Features187
Message Waiting
Description
An extension user can leave a Message Waiting indication at a busy or unanswered extension 
requesting a return call. The indication is a flashing MW key at the called extension. Answering the 
Message Waiting automatically calls the extension which left the indication. Message Waiting  
ensures that a user will not have to recall an unanswered extension. It also ensures that a user will 
not miss calls when their...

Message Waiting
188Chapter 1: FeaturesDS2000 Software Manual
Programming List
Program 0201 - Voice Mail Installed (page 368)
Enter N to disable Voice Mail and enable Message Waiting.
Other Related Features
Call Forwarding (page 43)
An extension user cannot leave a Message Waiting at an co-worker that has Call Forward-
ing Immediate (*34) enabled. Pressing MW automatically leaves a message at the for-
warding destination instead.
An extension user cannot leave a Message Waiting at a busy co-worker that...

Message Waiting
DS2000 Software ManualChapter 1: Features189
To review your Messages Waiting and then select a message for a return call: 
1. Do not lift the handset.
2. Press 
MW.
The first message display. Press MW repeatedly to display additional Messages Wait-
ing, if any.
3. When the extension you want to call displays, lift the handset.
4. Press 
MW.
If the extension you call is unanswered, busy or in DND, the system cancels Message 
Waiting.
If the called extension doesn’t answer, press your...

Microphone Mute
190Chapter 1: FeaturesDS2000 Software Manual
Microphone Mute
Description
Microphone Mute lets a keyset user turn off their phone’s Handsfree or handset microphone at any 
time. Once activated, Microphone Mute prevents the caller from hearing conversatoins in the user’s 
work area. The user can turn off the Handsfree or handset microphone while their telephone is idle, 
busy on a call, in DND or while a call is ringing. The microphone stays off until the user turns it 
back on.
While an...

Microphone Mute
DS2000 Software ManualChapter 1: Features191
To deactivate Microphone Mute:
1. Press 
MIC.N/A.
MIC on.
N/A.
MIC off. 

Monitor / Silent Monitor
192Chapter 1: FeaturesDS2000 Software Manual
Monitor / Silent Monitor
Description
Monitor lets an extension user listen to the conversation at a busy extension. To implement Monitor, 
an extension uer just calls a busy extension and dials the Monitor code. The busy extension and 
their caller have no indication of the intusion. There are no tones heard and there is no visual indi-
cation that monitoring is occuring. For example, Monitor could help the superisor of a service...