Nitsuko Ds2000 Software Manual

Night Service / Night Ring
DS2000 Software ManualChapter 1: Features203
Program 1805 - Ring Assignments (page 466)
Assign ringing for each trunk at each extension (1 = Lamp only [day and night], 2 = Ringing 
day and night, 3 = Night Ring only, lamp during the day, 4 = Delay ring day and night).
Other Related Features
Direct Inward Line (page 88)
The extension to which the DIL is terminated controls the night mode of the DIL.
If a DIL is terminated to the Voice Mail master number, a System Mode key...

Night Service / Night Ring
204Chapter 1: FeaturesDS2000 Software Manual
To answer a call ringing the system at night (UNA Pickup):
1. Press 
ICM.
2. Dial ** followed by the UNA code (01-04).
Dial the lowest number first (e.g., 01). If you hear busy, try the next highest number 
(e.g., 02).Trunk ring.
N/A 

Off-Hook Signaling
DS2000 Software ManualChapter 1: Features205
Off-Hook Signaling
Description
When a user is busy on a call, Off-Hook Signaling indicates that another caller is trying to get 
through. Off-Hook Signaling helps important callers get through, without waiting in line for the 
called extension to become free.  After the user hears the off-hook signal, they can use other system 
features (such as Hold or Park) to process their active call and then answer the waiting call.
Off-Hook Signaling...

Off-Hook Signaling
206Chapter 1: FeaturesDS2000 Software Manual
Key Ring (page 170)
Off-Hook Signaling can occur for Key Ring calls.
Park (page 218)
An extension user can  Park their current call and answer the waiting call.
Split (Alternate) (page 272)
An extension user can alternate between their active call and their waiting call.
Transfer (page 324)
An extension user can Transfer their current call to a co-worker or Voice Mail and then answer 
the waiting call. In addition, transferred calls can...

Off-Premise Extensions / On-Premise SLT Extensions
DS2000 Software ManualChapter 1: Features207
Off-Premise Extensions / On-Premise SLT Extensions
Description
The system is compatible with 500 type (dial pulse) and 2500 type (DTMF) analog telephone 
devices. This includes telco OPX circuits, on-premise single line telephones (SLTs), fax machines, 
modems and voice mail ports. On- and Off-Premise SLTs connect to 2-OPX Modules. On-Premise 
SLTs connect to 2-OPX Modules or ASTU PCBs.
ASTU PCBs are...

Off-Premise Extensions / On-Premise SLT Extensions
208Chapter 1: FeaturesDS2000 Software Manual
Default Setting
The system’s 2-OPX Modules do not auto-ID. See the Programming List below more.
Programming List
Program 0403 - Drop Pulse Send (page 387)
Use this timer to set the duration of the ASTU PCB drop pulse. This pulse is sent from the 
ASTU PCB to the connected analog device to initiate a disconnect.
Program 0403 - DTMF Detect (page 387)
Set the DTMF detection threshold for single line (analog...

Off-Premise Extensions / On-Premise SLT Extensions
DS2000 Software ManualChapter 1: Features209
Call Waiting / Camp-On (page 51)
1. Call busy extension + Dial 
2 + Do not hang up.
If you hang up, the system converts your Camp-On to a Callback.
2. Speak to your co-worker when they answer their Camp-On ring.
Callback (page 54)
1. Call busy extension + Dial 
2 and hang up.
Stay on the line without hanging up if you want to Camp-On instead.
2. When Callback rings your phone, lift handset to answer.
3. Speak...

Off-Premise Extensions / On-Premise SLT Extensions
210Chapter 1: FeaturesDS2000 Software Manual
Hold (page 156)
Place
1. Hookflash.
This places a trunk call on Exclusive Hold.
2. (Optional) Hang up.
Retrie
ve
1. From Intercom dial tone, dial *7
Intercom (page 165)
Place
1. Lift handset + Dial extension number (300-316).
To call the operator, dial the operator s extension number or dial 0 or 01-04 (depend-
ing on how your system is set up).
If your call voice-announces the destination, you can dial 1 to...

Off-Premise Extensions / On-Premise SLT Extensions
DS2000 Software ManualChapter 1: Features211
Dial the lowest code first (e.g., 01). If you hear busy, try the next highest code (e.g., 
02).
Paging (page 214)
SLTs cannot receive Paging announcements.
1. Lift handset + Dial 
*1 + Dial Paging zone (1-7 or 0 for all call).
Park (page 218)
P
ark a Call
1. Place or answer call + Hookflash + Dial * + Dial orbit (60-69 for system orbits, *300-*331 for 
Personal Park)
Retrie
ve a Parked Call
1. Lift handset +...

Off-Premise Extensions / On-Premise SLT Extensions
212Chapter 1: FeaturesDS2000 Software Manual
Voice Mail (page 340)
1. Lift handset + Dial *8.