Home > Nitsuko > Communications System > Nitsuko Ds2000 Software Manual

Nitsuko Ds2000 Software Manual

Here you can view all the pages of manual Nitsuko Ds2000 Software Manual. The Nitsuko manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 251

Removing Trunks and Extensions From Service
DS2000 Software ManualChapter 1: Features243
Programming List
Program 0101 - Direct Trunk Access (page 364)
Enter Y to enable an extension to use Direct Trunk Access. Note that enabling Direct Trunk 
Access allows the user to bypass Toll Restriction.
Program 1801 - Extension Class of Service Assignment (page 450)
Assign Class of Service to extensions.
Other Related Features
Attendant Position (page 24)
Normally, system attendants should have the ability to...

Page 252

Repeat Redial
244Chapter 1: FeaturesDS2000 Software Manual
Repeat Redial
Description
LCCPU 01.00.00 Not available. 

Page 253

Reverse Voice Over
DS2000 Software ManualChapter 1: Features245
Reverse Voice  Over
Description
While on a handset call, Reverse Voice Over lets a busy keyset user make a private Intercom call to 
an idle co-worker. The busy user just presses and holds down a programmed Reverse Voice Over 
key to make a private call to the assigned co-worker. The initial caller cannot hear the Reverse voice 
Over conversation. The private Intercom call continues until the Reverse Voice Over caller releases 
the key...

Page 254

Reverse Voice Over
246Chapter 1: FeaturesDS2000 Software Manual
Default Setting
No Reverse Voice Over keys assigned
Programming Guide
Programming List
Program 1701 -  Reverse Voice Over Key (page 439)
Assign a keyset programmable key as a Reverse Voice Over key (code 23 followed by the 
assigned extension number).
Program 1704 -  Reverse Voice Over Key (page 447)
Assign a DSS Console programmable key as a Reverse Voice Over key (code 23 followed by 
the assigned extension number).
Other Related...

Page 255

Reverse Voice Over
DS2000 Software ManualChapter 1: Features247
Feature Operation
To place a Reverse Voice Over call:
1. While on a handset call, press and hold your Reverse Voice Over key.
To return to your initial caller:
1. Release your Reverse Voice Over key.
To place a call to your assigned Reverse Voice Over destination:
1. While your telephone is idle, press your Reverse Voice Over key.
You can optionally lift the handset for Privacy.Two beeps, then conversation with called co-worker.
Reverse...

Page 256

Ring Groups
248Chapter 1: FeaturesDS2000 Software Manual
Ring Groups
Description
Refer to Group Ring on page 144 for more information. 

Page 257

Ringdown Extension
DS2000 Software ManualChapter 1: Features249
Ringdown Extension
Description
A Ringdown Extension automatically calls a co-worker, Voice Mail, a Ring Group or a UCD Hunt-
ing group when the user lifts the handset. The call automatically goes through — there is no need 
for the user to dial digits or press additional keys. Ringdown extension are frequently used for 
lobby phones, where the caller just lifts the handset to get the information desk.
Conditions
None
Default Setting
Ring...

Page 258

Ringdown Extension
250Chapter 1: FeaturesDS2000 Software Manual
begin speaking.
To bypass Ringdown (if your keyset is set up as a Ringdown Extension):
1. Before lifting the handset or pressing 
SPK, press one of the following:
- 
ICM
- Line key
- Programmable Function Key 

Page 259

Ringing Line Preference
DS2000 Software ManualChapter 1: Features251
Ringing Line Preference
Description
Ringing Line Preference lets a keyset user answer a ringing call by just lifting the handset. For a 
user that primarily answers calls, Ringing Line Preference ensures that ringing calls have priority. 
The tables below show the interaction between Ringing Line Preference and other features for both 
handset and headset calls.LCCPU 01.00.00 Available.
Simply lift the handset to answer a ringing...

Page 260

Ringing Line Preference
252Chapter 1: FeaturesDS2000 Software Manual
When multiple calls ring an extension simultaneously, the system services the ringing calls in the 
following order:
1.
ICM Key
2. Line Key (from lowest to highest)
3. Loop Key (from lowest to highest)
Conditions
None
Default Setting
Enabled
Programming List
Program 1807 - Ringing Line Preference (page 469)
Enter Y to enable Ringing Line Preference.
Other Related Features
Attendant Call Queuing (page 22)
Ringing Line Preference will...
Start reading Nitsuko Ds2000 Software Manual

Related Manuals for Nitsuko Ds2000 Software Manual

All Nitsuko manuals