Nitsuko Ds2000 Software Manual

Speed Dial
DS2000 Software ManualChapter 1: Features263
Speed Dial
Description
Speed Dial gives an extension user quick access to frequently called numbers. There are two types 
of Speed Dial: System and Personal. Speed Dial numbers can be up to 30 digits long, using 0-9, # 
and *. Every Speed Dial can have a programmed name up to 16 characters long. The name shows in 
the telephone display as the Speed Dial number dials out.
Speed Dial can store outside numbers and Intercom digits. The capability to...

Speed Dial
264Chapter 1: FeaturesDS2000 Software Manual
The system automatically assigns System Speed Dial blocks. By default, Personal Speed Dial 
Blocks are assigned as follows.
You can change the Personal Speed Dial block assignment for an extension in system pro-
gramming. Always be careful, however, to not assign a Personal Speed Dial block that is 
already in use for System Speed Dial. If you do, that extension’s personal entries will over-
write the system entries, and vice-versa.
Extensions...

Speed Dial
DS2000 Software ManualChapter 1: Features265
Programming Guide
Step-by-step guide for setting up Speed Dial
Step 1: Should extension be able to use System Speed DIal?
• In Program 0101 - System Speed Dial Access 
(page 362), enter Y if extension should have 
access to System Speed Dial.
• In Program 1803 - Extension Line Access Assign-
ments (page 461), make sure extensions have 
access to the trunks you want to use for System 
Speed Dial.
• In Program 1002 - Trunk Groups (page 424),...

Speed Dial
266Chapter 1: FeaturesDS2000 Software Manual
Step 4: Should extension or DSS Console have Programmable Function Key access to Sys-
tem Speed Dial numbers.
• In Program 1701 - System Speed Dial Key 
(page 438), assign a keyset programmable key as 
a System Speed Dial Key (code 14 + System 
Speed Dial bin number).
• In Program 1704 - System Speed Dial Key 
(page 446), assign a DSS Console key as a Sys-
tem Speed Dial Key (code 14 + System Speed 
Dial bin number).
• Do not assign keyset or DSS...

Speed Dial
DS2000 Software ManualChapter 1: Features267
Step 7: Should extension or DSS Console have Programmable Function Key access to Per-
sonal Speed Dial numbers.
• In Program 1701 - Personal Speed Dial Key 
(page 438), assign a keyset programmable key as 
a Personal Speed Dial Key (code 15 + System 
Speed Dial bin number).
• In Program 1704 - Personal Speed Dial Key 
(page 446), assign a DSS Console key as a Per-
sonal Speed Dial Key (code 10 + System Speed 
Dial bin number).
• Do not assign...

Speed Dial
268Chapter 1: FeaturesDS2000 Software Manual
Programming List
Program 0101 - System Speed Dial Access (page 362)
In an extension’s Class of Service, enter Y to allow the extension to access System Speed Dial 
numbers.
Program 0201 - Enable Dial-out of # in a Speed Dial Number (page 368)
Enter Y for this option if you want the system to outdial any # characters stored in the Speed 
Dial number. Enter N to have the system suppress outdialing the #. (You may want to enter N 
if the system is...

Speed Dial
DS2000 Software ManualChapter 1: Features269
Program 0401 - Dialing Pause (page 376)
For Speed Dial, the system waits this interval when it encounters a pause in a Speed Dial bin.
Program 0402 - Dial Tone Detect (page 378)
When the system seizes a line to place a Speed Dial call, it waits this interval for dial tone 
before outdialing the call.
Program 0402 - PBX/Centrex Flash (page 379)
When the system encounters a flash in a Speed Dial bin, it opens the loop on the trunk for this 
interval...

Speed Dial
270Chapter 1: FeaturesDS2000 Software Manual
Feature Operation
Personal Speed Dial
To Program a Personal Speed Dial Number:
1. Press 
ICM and dial ##.
2. Dial the Personal Speed Dial bin number (701-720).
OR
Press Personal Speed Dial Key (for bins 1-10).
OR
Press 
DIAL and the Personal Speed Dial Key for bins 11-20.
3. Press 
HOLD.
4. Enter the trunk number you want the system to use when dialing your stored number (1-16)>
OR
Enter the Trunk Group number you want the system to use when...

Speed Dial
DS2000 Software ManualChapter 1: Features271
System Speed Dial
To Program a System Speed Dial Number:
1. Press 
ICM and dial ##.
2. Dial the System Speed Dial bin number (normally 200-299).
3. Press 
HOLD.
4. Enter the trunk number you want the system to use when dialing your stored number (1-16)>
OR
Enter the Trunk Group number you want the system to use when dialing your stored number 
(e.g., 90 for Trunk Group 0).
5. Press
 HOLD.
6. Enter the number you want to store (up to 30 digits...

Split (Alternate)
272Chapter 1: FeaturesDS2000 Software Manual
Split (Alternate)
Description
With Split, an extension user can split (alternate) between a current call and a new call. Split lets the 
extension user easily alternate between the calls without joining (Conferencing) the parties 
together.
Conditions
None
Default Setting
Split disabled (no Split keys programmed).
Programming Guide
Programming List
Program 1701 -  Split Key (page 438)
Assign a Programmable Function Key as a Split key (code...