Nitsuko Ds2000 Software Manual

Station Overflow
DS2000 Software ManualChapter 1: Features283
Station Overflow
Description
LCCPU 01.00.00 Not available. 

System Diagnostics
284Chapter 1: FeaturesDS2000 Software Manual
System Diagnostics
Description
LCCPU 01.00.00 Not available. 

System Identification
DS2000 Software ManualChapter 1: Features285
System Identification
Description
The system adminstrator can enter the site name and telephone number into the system data base. 
This information is saved into system memory and will appear on system diagnostic reports, once 
available.
Conditions
None
Default Setting
No entries.
Programming Guide
Programming List
Program 0302 - Company Name (page 372)
14 Enter the name of the company (up to 14 characters) at which the system is...

System Identification
286Chapter 1: FeaturesDS2000 Software Manual
Program 0302 - Company Phone Number (page 372)
Enter the number that the system should call to report a fault. This is not the number of the 
company where the system is installed. It is the number of the remote service center.
Other Related Features
Automatic Fault Reporting (page 29)
System Diagnostics (page 284)
The company name and phone number will display on system diagnostic reports.
Feature Operation
None 

System Programming Backup and Restore
DS2000 Software ManualChapter 1: Features287
System Programming Backup and Restore
Description
You can use PC Card P/N 85880 or P/N 80050-V**.** (with system software preloaded) to back 
up and restore your site data. Each PC card can store up to 12 complete data bases. In addition, you 
can assign a name (up to 10 characters long) to each stored data base.
The PC Card provides a permanent, non-volatile backup of all the site’s programming. If you have 
backed up...

System Programming Backup and Restore
288Chapter 1: FeaturesDS2000 Software Manual
Programming List
Program 9906 - Database Save (page 479)
Save (back up) site data to a PC card.
Program 9907 - Database Load (page 481)
Restore (load) site data from a PC card.
Other Related Features
Automatic Fault Reporting (page 29)
System Diagnostics (page 284)
If the system diagnostics report a critical fault that requires a CPU change or system initializa-
tion, the installer can quickly restore site programming...

System Programming List
DS2000 Software ManualChapter 1: Features289
System Programming List
Description
The following system programs are available:
Program 0100 - Class of Service (page 362)
Program 0101 - Class of Service Options (page 362)
Program 0200 - Tenant Options (page 367)
Program 0201 - Tenant Option Programming (page 367)
Program 0300 - System Options (page 370)
Program 0301 - System Options (Part 1) (page 370)
Program 0302 - System Identification (page 372)
Program 0400 - Timers (page 375)...

System Programming List
290Chapter 1: FeaturesDS2000 Software Manual
Program 1800 - Extension Options (page 449)
Program 1801 - Extension Port Description (page 449)
Program 1802 - Extension Options (Part 1) (page 455)
Program 1803 - Extension Line Access Assignments (page 461)
Program 1804 - Extension Trunk Group Access (page 464)
Program 1805 - Ring Assignments (page 466)
Program 1807 - Extension Options (Part 2) (page 469)
Program 9800 - System Utilities, Part 1 (page 472)
Program 9801 - Copy Command...

System Programming Password Protection
DS2000 Software ManualChapter 1: Features291
System Programming Password Protection
Description
The system controls access to the programmable options according to the programming password 
the administrator enters. There are three password levels:
Conditions
None
Default Setting
See the table above.
Programming List
Program 9905 - Password (page 478)
Review the complete list of programmable options.
Other Related Features
System Programming Backup and Restore...

System Timers
292Chapter 1: FeaturesDS2000 Software Manual
System Timers
Description
The system-wide timers allow the adminstrator system performance to meet the specific application 
requirements. Review the table below for a description of each timer.
Following is a summary of the Program 0401 - System Timers (page 375) options. LCCPU 01.00.00 Information to be provided.
Use the system-side timers to tailor the system to the site’s requirements.
Table 11: Program 0401 - System Timers (Page 1 of 2)...