Nitsuko 124i/384i Software Manual

Tie Lines (Items 1-10)
Voice Mail (Items 1-10 and 19-32)
Telephone Programming Instructions
To enter data for Program 0116 (Tone Detection Setup):
Items 1-18
1. Enter the programming mode.
2. 0116 + HOLD
Item No?
3. Enter the number of the item you want to program (1-18) + HOLD
4. Enter the value for the selected item from the table above + HOLD
Item No?
5. Repeat from step 3 to select another item (1-18).
OR
HOLD to exit.
Items 19-32
1. Enter the programming mode.
2. 0116 + HOLD
Item No?
3. Enter the...

0117 - Trunk CODEC Gain Type Settings
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
- Requires Base 2.13, EXCPRU 2.18
or higher.- Requires system software 3.04 or
higher.
INUse this program to customize the five CODEC gain types for trunks. Each type has a unique CODEC transmit
and receive level. Use Program 0901 Item 3 to assign gain types to trunk circuits. Available entries are:
0-31 = 0 to + 15.5 dB in .5 dB steps
32-63 = 0 to -15.5 dB in .5 dB steps...

0118 - Extension CODEC Gain Type Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 0118 - Extension Codec Gain Type Setup to set the five CODEC gain types for 500/2500 type
extensions. Each type has a unique CODEC transmit (from system to phone) and receive (from phone to sys-
tem) level (called the gain value). You’ll assign CODEC gain types to extensions in Program 1001.  The follow-
ing chart shows the relative gain (in dB) for each gain...

9. Repeat from step 3 to make additional entries
OR
HOLD to exit
0100 - Basic Hardware Setup (Part A)
0118 - Extension CODEC Gain Type Setup
678   PROGRAMMING 92000SWG08  Issue 1-0 

0119 - External Page/Door Box CODEC Gain Types
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 0119 - External Page/Door Box CODEC Gain Types to set up the five CODEC gain types for
External Paging and Door Box ports.  Each type has a unique CODEC transmit and receive level (called the
gain value). You’ll assign CODEC gain types to External Paging and Door Box ports in Program 0120.  The fol-
lowing chart shows the relative gain (in dB) for each...

8. Repeat from step 3 to make additional entries.
OR
HOLD to exit
0100 - Basic Hardware Setup (Part A)
0119 - External Page/Door Box CODEC Gain Types
680   PROGRAMMING 92000SWG08  Issue 1-0 

0120 - External Page/Door Box CODEC Gain Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 0120 - External Page/Door Box CODEC Gain Setup to assign a CODEC gain type (set in Program
0119) to the External Paging and Door Box ports. Assign a gain number to each Paging/Door Box PCB port.
Conditions
None
Feature Cross Reference
Door Box
Paging (External)
Telephone Programming Instructions
To enter data for Program 0120 (External Page and Door Box...

0121 - ISDN Layer 1 Operation Mode Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
0100 - Basic Hardware Setup (Part A)
0121 - ISDN Layer 1 Operation Mode Setup
682   PROGRAMMING 92000SWG08  Issue 1-0 

0122 - ISDN Layer 1 Timer Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
0100 - Basic Hardware Setup (Part A)
0122 - ISDN Layer 1 Timer Setup
92000SWG08  Issue 1-0 PROGRAMMING   683 

0123 - ISDN Layer 2 Operation Mode Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
0100 - Basic Hardware Setup (Part A)
0123 - ISDN Layer 2 Operation Mode Setup
684   PROGRAMMING 92000SWG08  Issue 1-0