Nitsuko 124i/384i Software Manual

0124 - ISDN Layer 2 Timer Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
0100 - Basic Hardware Setup (Part A)
0124 - ISDN Layer 2 Timer Setup
92000SWG08  Issue 1-0 PROGRAMMING   685 

0125 - ISDN Layer 3 Operation Mode Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
0100 - Basic Hardware Setup (Part A)
0125 - ISDN Layer 3 Operation Mode Setup
686   PROGRAMMING 92000SWG08  Issue 1-0 

0126 - ISDN Layer 3 Timer Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
0100 - Basic Hardware Setup (Part A)
0126 - ISDN Layer 3 Timer Setup
92000SWG08  Issue 1-0 PROGRAMMING   687 

0127 - ITSU Operation Mode Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INRefer to the system PRI (P/N 92000PRI**) or BRI (P/N 92000BRI**) Manual.
0100 - Basic Hardware Setup (Part A)
0127 - ITSU Operation Mode Setup
688   PROGRAMMING 92000SWG08  Issue 1-0 

0128 - Analog Station (ASTU PCB) Sidetone Level
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INUse Program 0128 - Analog Station (ASTU PCB) Sidetone Level to set the sidetone level for single line tele-
phones connected to ASTU PCBs. In Program 0128 Item 1, you can choose among the four preset sidetone lev-
els or up to eight additional levels calibrated to specific telephones. Use Program 0128 Item 2 to calibrate levels
for individual phones.
0128 Item 1...

To calibrate the sidetone for a specific single line extension in Program 0128 Item 2:
1. Enter the programming mode.
2. 0128 + HOLD
STA PORT No?
3. Enter the number of the ASTU single line station port you want to program +HOLD
Item No?
4. 2 + HOLD
ADF DSP Type
5. Lift the handset on the single line telephone that you want to automatically calibrate.
6. Remove the handset modular line cord.
If the handset doesn’t have a modular line cord, disassemble the handset earpiece and remove
the wires connected...

0129 - Analog Trunk (ATRU PCB) Sidetone Setting
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INUse Program 0129 - Analog Trunk (ATRU PCB) Sidetone Setting to set the sidetone level for analog trunks con-
nected to ATRU PCB ports. In Program 0129, you can choose among the four preset sidetone levels or up to eight ad-
ditional levels calibrated to specific trunks. Use Program 0129 Item 2 to calibrate levels for individual trunks.
0129 Item 1 Entry...

To calibrate the sidetone for a specific trunk in Program 0129 Item 2:
1. Enter the programming mode.
2. 0129 + HOLD
TRK No?
3. Enter the number of the ATRU trunk port you want to program + HOLD
Item No?
4. 2 + HOLD
ADF DSP Type
5. At a different telephone, use Handsfree (i.e., press SPK) to place or answer a call on the trunk you want
to automatically calibrate.
6. Press the MIC key to enable Microphone Mute.
The microphone must be muted before going to the next step. For an accurate calibration, the...

0130 - Date Format for SMDR and System Reports
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 0130 - Date Format for SMDR and System Reports to set the date format that appears on the
SMDR printout and various system reports. The options are:
0 (U.S.A. format - month/date/year)
1 (Japanese format - year/month/date)
2 (European format - date/month/year)
Conditions
None
Feature Cross Reference
Station Message Detail Recording
Time and Date
Telephone...

0131 - Unsupervised Conf. CODEC Gain Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
INUse Program 0131 - Unsupervised Conference CODEC Gain Setup to set up the five CODEC gain types for
trunk circuits in an Unsupervised Conference. Each type has a unique CODEC transmit and receive level (called
the gain value). You assign CODEC gain types to trunks for Unsupervised Conference in Program 0901, Item
23. The following chart shows the relative gain (in dB) for...