Nitsuko 124i/384i Software Manual

0308 - Conference Circuit Setup
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Not available. 384i Available.
INUse Program 0308 - Conference Circuit Setup to define the function of the Conference circuits on the CDTU
PCBs. Each CDTU PCB has two Conference circuits (called blocks) which you can program for Conference or
Speech Recording. Since the system accepts up to 8 CDTU PCBs, there are 16 programmable Conference
blocks (32 Conference circuits).
Conditions
(A.) Speech Recording is...

0309 - DSS Console Operating Mode
✔ Sorts Data  Updates CEU
✔  Can be Copied
Description
 124i Regular Mode available only. 384i Regular Mode and Hotel Mode
available.
INUse Program 0309 - DSS Console Operating Mode to set the mode of the system’s DSS Consoles. The entry
you make in this option applies to all the system’s DSS Consoles. The available options are:
•Regular (Business) Mode (0)
•(384i Only) Hotel Mode (3)
Conditions
None
Feature Cross Reference
Direct Station Selection (DSS) Console...

0400 - Extension Options (For Tenant Groups)0401 - Tenant Group Options (Part A)
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — one Tenant Group. 384i Available — four Tenant Groups.
INUse Program 0401 - Tenant Group Options Part A to set up various options for each tenant group. You can
set the options differently for each of the four tenant groups. Refer to the following chart for a description of
each option, its range and default setting.
Tenant Group Options (Part A)
Item...

Tenant Group Options (Part A)
Item Description Feature Range Default
Item 7Handsfree Microphone Control
Use this option to enable or disable a
keyset’s Handsfree microphone. If
enabled, a user can place a call
Handsfree without lifting the handset.
If disabled, a user can place a call
Handsfree but must lift the handset to
talk.Handsfree and
Monitor0 = Disabled
1 = Enabled1 (Enabled)
Item 8Incoming Call Priority
Use this option to determine if
Intercom calls or trunk calls have
answer priority when both...

Tenant Group Options (Part A)
Item Description Feature Range Default
Item 15Abbreviated Dialing DIAL Key
Control 
Use this option to control the function
of the extension’s DIAL key when
used with Abbreviated Dialing.  The
DIAL key can access either the
Common or Group Abbreviated
Dialing numbers. Abbreviated
Dialing0 = Common
Abbreviated
Dialing 
1 = Group
Abbreviated
Dialing 0 (Common
Abbreviated
Dialing)
Items
16 and
17Not used
Item 18SLT Answering Mode
For a busy single line (500/2500 type)...

Tenant Group Options (Part A)
Item Description Feature Range Default
Item 22Headset Busy Mode
Set the conditions under which a
headset extension is busy to incoming
callers.Headset
Operation0 = Headset
extension is busy
to incoming
callers when only
one extension
appearance is busy
1 = Headset
extension is busy
to incoming
callers only when
both extension
appearances are
busy.0
Item 23DIL Call Waiting
Use this option to set Voice Mail
Overflow operation.Voice Mail 0 = Immediate
Voice Mail
Overflow...

Tenant Group Options (Part A)
Item Description Feature Range Default
Item 31VAU Fixed MessageTBD 0
Item 32Restriction for Incoming AnswerTBD 0
Conditions
None
Feature Cross Reference
Refer to the chart above.
Telephone Programming Instructions
To enter data for Program 0401 (Tenant Group Options [Part A]):
1. Enter the programming mode.
2. 0401 + HOLD
Tenant No?
3. Enter the number of the Tenant Group you want to program.
4. HOLD
Item No?
5. Enter the number of the item you want to program.
6. HOLD...

0402 - Tenant Group Options (Part B)
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available — one Tenant Group. 384i Available — four Tenant Groups.
INUse Program 0402 - Tenant Group Options Part B to set up additional options for each tenant group. You can
set the options differently for each of the four tenant groups. Refer to the following chart for a description of
each option, its range and default setting.
Tenant Group Options (Part B)
Item Description Feature Range Default
Item...

Tenant Group Options (Part B)
Item Description Feature Range Default
Item 6CONF (TRF) Key Operating
Mode (Part B)
Use this option to assign the CONF
(TRF) key for Transfer (0) or
Conference (1). If set for Transfer
(0), you must also enter 0 for Item 2
above.Conference
Transfer0 = Transfer
1 = Conference(384i) 1
(Conference)
(124i) 0
(Transfer)
Item 7ARS Misdialed Number Handling
If a user dials a call not programmed
in ARS, this option determines if the
system should route over trunk
group 1 or play...

0403 - Selectable Display Messages
  Sorts Data   Updates CEU   Can be Copied
Description
 124i Available. 384i Available.
SAUse Program 0403 - Selectable Display Messages to enter the Selectable Display Messages. Each tenant has
20 alphanumeric messages, up to 29 characters long. Use the following chart when programming messages.
Keys for Entering Messages
Use this key . . . When you want to . . .
DSS1 Enter characters A-D. After selecting your entry, press
CHECK to have system accept it.
DSS2 Enter...