Nitsuko 124i/384i Software Manual

Operation
Calling an extension from your DSS Console:
1.(Optional for 384i) Press EXT.1 or EXT.2 to select the range.
In 124i, pressing EXT.2 accesses Direct Line Selection.
2. Press DSS Console key.
If the call voice-announces, you can make it ring by dialing 1.
If you don’t have Handsfree, you must lift handset to speak.
Extension Busy Lamp Field
When the DSS key is... The assigned extension is...
On Busy on a call 
Off Idle
Flashing fast In Do Not Disturb 
Placing a trunk call from your DSS Console:...

Operation (Cont’d)
Transferring a call using your DSS Console:
1. Place or answer call.
If you are on an Intercom call, press HOLD before going to the next step.
2. Press DSS key for extension that will receive transfer.
You cannot Transfer to an extension that is busy or in Do Not Disturb.
3. (Optional) Announce call.
If called party doesn’t want the call, press flashing line or CALL key to retrieve it.
4. Press SPK to hang up.
Making a External Page using your DSS Console:
1. Press PAGE.
2. Press DSS...

Operation (Cont’d)
Activating DSS Console Alternate Answer:
1. Press ALT.
You hear a short confirmation tone.
If you hear a long tone, you cannot enable Alternate Answer. Another user has already enabled
your console as their Alternate Answer destination.
Alternate Answer Busy Lamp Field 
When the ALT key is... Alternate Answer is... 
On Enabled 
Off Disabled 
Using a DSS Console key as a One-Touch or Programmable Function Key:
You can store Service codes, Programmable Function Key codes and other digits...

Directed Call Pickup
Description
 124i Available. 384i Available.
Directed Call Pickup permits an extension user to intercept a call ringing another extension. This allows a user
to conveniently answer a co-worker’s call from their own telephone. With Directed Call Pickup, an extension
user can pick up:
•Trunk calls  (i.e., Ring Group calls)
•Direct Inward Lines
•Transferred trunk calls
•Transferred Intercom calls
•Ringing and voice-announced Intercom calls
Conditions
(A.) Directed Call Pickup does not...

Directory Dialing
Description
 124i Not available. 384i Available.
- Requires Base 2.13 or EXCPRU
2.18 or higher.- Requires system software 3.06.02 or
higher.
Directory Dialing allows a display or Super Display keyset user to select a co-worker or outside call from a list
of names, rather than dialing the phone number. There are four types of Directory Dialing:
•C - Company (Common) Abbreviated Dialing
•D  - Department (Group) Abbreviated Dialing
•P - Personal Abbreviated Dialing (One-Touch) Keys
•X -...

Programming (Cont’d)
➣
0405 - System Timers (Part A), Item 10: Intercom Interdigit Time
If a user waits longer than this interval between Directory Dialing steps, Directory Dialing automat-
ically cancels.
➣1006 - Programming Function Keys (Part A)
If you want a display keyset to be able to review Directory Dialing entries while on a call, assign a Direc-
tory Dialing key (code 1082).
Related Features
None
Operation
To use Directory Dialing from a display keyset:
1. Do not lift handset or press SPK.
2....

Operation (Cont’d)
To cancel Directory Dialing:
7. Press CLEAR.
To review your Directory Dialing entries while on a call:
1. Press Directory Dialing key (PGM 1006 or SC 851: 1082).
Features D-M
Directory Dialing
92000SWG08   Issue 1-0FEATURES   267 

Distinctive Ringing, Tones and Flash Patterns
Description
 124i Available. 384i Available.
- Customizing the Keyset Splash Tone,
Keyset Confirmation Tone, Trunk
Ring Tone, Intercom Ring Tone and
Alarm Ring Tone requires Base 2.13,
EXCPRU 2.18 or higher.- Customizing the Keyset Splash Tone,
Keyset Confirmation Tone, Trunk
Ring Tone, Intercom Ring Tone and
Alarm Ring Tone requires system
software 3.04 or higher.
Distinctive Ringing, Tones and Flash Patterns provide extension users with audible and visual...

Programming
No YesNo Yes
In 0110, select a
new frequency
and duration for
the Dial Pad
Confirmation
Tone.
In 0109, select
a new keyset
splash tone
frequency.
(384i Ony) Do you wnat to
change the frequency and
duration of the Dial Pad
Confirmation Tone?
(384i Only) Do you want to
change the frequency of
the keyset splash tone?NoYesAssign a Class Service to an
extension in Program 1005.
Enable checking tones in
Class of Service Program
0406 Item 86.Enable changing tones in
Class of Service Program
0406...

Programming (Cont’d)
➣
0109 - Keyset Splash Tone
Set the frequency of the system’s splash tone.
➣0110 - Keyset Confirmation Tone
Set the frequency and duration of the Dial Pad Confirmation Tone.
➣0111 - Trunk Ring Tone
Customize the trunk ring tones (i.e., the tones a user hears when a trunk rings an extension).
➣0112 - Intercom and Alarm Ring Tone
If desired, change the Intercom and External Alarm Sensor ring tones.
➣0406 - COS Options, Item 59: Selectable Ring Tone Selection
In an extension’s COS,...