Nitsuko 124i/384i Software Manual

Features D-MDepartment Step Calling
Description
 124i Available. 384i Available.
After calling a busy Department Calling Group member, an extension user can have Department Step Calling
quickly call another member in the group. The caller does not have to hang up and place another Intercom call if
the first extension called is unavailable. Department Step Calling also allows an extension user to cycle through
the members of a Department Group.
Conditions
None
Default Setting
Enabled.
Programming
Refer...

Programming (Cont’d)
Start
Stop
Does system have
Department Groups
programmed?Set up Department Groups.
Refer to the Department
Calling feature.
After calling a busy
Department Group
member, should caller be
able to step call to
another group member?
In 0406:21, enter 1 to
enable Step Calling.In 0406:21, enter 0 to
disable Step Calling.
In 1005, assign Class of
Service to extensions.
Should extension have
one-button Step Calling?In 1006, assign a Step
Calling key (code 1021).In 1006, be sure not to...

Dial Number Preview
Description
 124i Available. 384i Available.
Dialing Number Preview lets a display keyset user dial and review a number before the system dials it out.  Dial-
ing Number Preview helps the user avoid dialing errors.
Conditions
An extension user cannot edit the displayed number.
Default Setting
Enabled.
Programming
No Yes
Stop
In 1005, assign Class of
Service to extensions.
In 0406 Item 50, enter 0
to disable Dial Number
Preview.In 0406 Item 50, enter 1
to enable Dial Number...

Programming (Cont’d)
➣
0406 - COS Options, Item 50: Dial Number Preview
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to use Dial Number Pre-
view.
➣1005 - Class of Service
Assign a Class Of Service (1-15) to an extension.
Related Features
None
Operation
To use Dial Number Preview to place a call:
1. Do not lift the handset or press a CALL key.
2. Dial *.
3. Dial number you want to call.
The number displays.
4. To dial out the displayed trunk number, press a line...

Dial Pad Confirmation Tone
Description
 124i Available. 384i Available.
- Changing the tone requires Base
2.13, EXCPRU 2.18 or higher.- Changing the tone requires system
software 3.04 or higher.
For an extension with Dial Pad Confirmation Tone enabled, the user hears a beep each time they press a key.
This is helpful for Intercom calls and Dial Pulse trunk calls, since these calls provide no Call Progress tones.
Conditions
None
Default Setting
Disabled
Programming
NoYes
In 0110, select another...

Programming (Cont’d)
➣
0110 - Keyset Confirmation Tone
If required, change the Dial Pad Confirmation Tone frequency and duration.
➣0406 - COS Options, Item 56: Dial Pad Confirmation Tone
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to turn Dial Pad Confir-
mation tone on and off.
➣1005 - Class of Service
Assign a Class Of Service (1-15) to an extension.
Related Features
Single Line Telephones
Dial Pad Confirmation Tone does not apply to single line telephones....

Dial Tone Detection
Description
 124i Available. 384i Available.
- Allocating circuits for Dial Tone
Detection is not required.- Allocating CDTU circuits for Dial
Tone Detection is required.
- Tone Detection Setup requires Base
2.13, EXCPRU 2.18 or higher.- Tone Detection Setup requires
system software 3.04 or higher.
- The Next Trunk in Rotary if No Dial
Tone option requires Base 4.02,
EXCPRU 4.02 or  higher.- The Next Trunk in Rotary if No Dial
Tone option requires system software
version 3.07.10 or...

Programming
Start
Do you want Dial
Tone Detection for
Directly Accessed
trunks?
In 0901:11, enter 1In 0901:11, enter 0.NoYes
For Trunk Group calls,
should the system skip to
the next trunk if dial tone
is not detected?
In 0921:3, enter 1.In 0921:3, enter 0.NoYes
If dial tone is not
detected, should
trunk hang (not
disconnect) or drop?In 0901:11, enter 1. Be sure
this doesnt conflict with the
site requirement for directly
accessed trunks.
In 0901:11, enter 0. Be sure
this doesnt conflict with the
site...

Programming (Cont’d)
Dial Tone Detection Program Interaction
Method 0901:11 0921:3 Result if dial tone not present . . .
Press a line key
OR
Dial #9 + Trunk number0 0 Trunk hangs (does not disconnect)
0 1 Trunk hangs (does not disconnect)
1 0 Trunk drops
1 1 Trunk drops
Dial a Trunk Group
code
OR
Automatically through
a feature0 0 Trunk hangs (does not disconnect)
0 1 Trunk reroutes after timeout
1 0 Trunk drops
1 1 Trunk reroutes after timeout
➣0116 - Tone Detection Setup
Use Items 11-32 to set the...

Direct Inward Dialing (DID)
Description
 124i Available — Four DID Translation
Tables with 200 entries each. Prior to
Base 1.2R, Wink Start Dial Pulse
DID operation was unavailable. 384i Available — eight DID Translation
Tables with 1500 entries each. 
- Intercept routing to Voice Mail requires
Base 2.13, EXCPRU 2.18 or higher.- Intercept routing to Voice Mail requires
system software 3.02 or higher.
- DTMF DID requires a Tone
Detector (DTDU) PCB. Tone
Detection Setup requires Base 2.13,
EXCPRU 2.18 or...