Nitsuko 124i/384i Software Manual

Programming
➣
0302 - Music on Hold and Conference Setup, Item 2: Conference Setup
(124i Only) Set the Conference mode of the system.  The system allows either 8 four-party conferences
(0) or 4 eight-party conferences (1).
(384i Only) Set the Conference mode of each DTU-A or DTU-C PCB.  The system allows either 4 four-
party conferences (0) or 2 eight-party conferences (1) per PCB.
➣0308 - Conference Circuit Setup
(384i Only) Assign the circuits on the DTU-A or DTU-C PCBs as Conference circuits (0).
➣0402...

Operation
To establish a Conference:
Keyset
1. Establish Intercom or trunk call.
2. Press CONF (TRF) or Conference key (PGM 1006 or SC 851:  1016).
Beginning with 384i system software 3.01.02 and in 124i, you can press HOLD instead.
3. Dial extension you want to add.
OR
Access outside call
OR
Retrieve call from Park orbit.
To get the outside call, you can either press a line key or dial a trunk/trunk group code.
You can optionally go back to step 2 to add more parties to your Conference.
4. When called...

Operation (Cont’d)
To place a Conference with outside callers on Hold (and return to it later on):
Keyset
1. Set up the Conference with your outside callers.
2. Press HOLD.
Your outside callers hear Music on Hold..
3. To speak individually to one of the outside callers on Hold:
- Press flashing line key.
OR
- Dial 867 and the line number (e.g., 001 for line 1).
Press HOLD and repeat the above step to speak individually with other callers on Hold.
4. Press CONF (TRF) to re-establish the Conference.
Single...

Conference, Voice Call/Privacy Release
Description
 124i The system allows either 8 four-
party conferences or 4 eight-party
conferences. 384i Each DTU-A/C allows either 4
four-party conferences or 2 eight-
party conferences per PCB.
Voice Call Conference lets extension user’s in the same work area join in a trunk Conference.  To initiate a Voice
Call Conference, an extension user just presses the Voice Call Conference key and tells their co-workers to join
the call.  The system releases the privacy on...

Programming (Cont’d)
Start
(Skip this decision in
124i.) Should the system
have Conference
capability?In 0308, assign the
blocks on the CDTU
PCB for Conference
(entry 0).In 0308, assign the
blocks on the CDTU
PCB for entry 1.
Should each CDTU
PCB allow four 4-party
conferences or two 8-
party conferences?
In 0302 Item 2,
enter 0.In 0302 Item 2,
enter 1.
Should an extension
be allowed to initiate a
Voice Call
Conference?In 0406 Item 17, enter 1
to allow initiating Voice
Call Conference.In 0406 Item 17,...

Operation
To set up a Voice Call Conference with a co-worker in your immediate work area:
1. Place or answer trunk call.
2. Press Voice Call Conference key (PGM 1006 or SC 851:  1017).
3. Announce Conference.
Just tell your co-worker about the call. Do not use telephone system features to announce it.
To join a Voice Call Conference (if invited).
1. After Conference request, press indicated line key.
To exit a Voice Call Conference without affecting the other parties:
1. Press SPK to hang up.
Features...

Continued Dialing
Description
 124i Available. 384i Available.
Continued Dialing allows an extension user to dial a call, wait for the called party to answer and then dial
additional digits. This helps users that need services like Voice Mail, automatic banking and Other Common 
Carriers (OCCs).
There are two types of Continued Dialing:
•Continued Dialing for Intercom Calls
Depending on an extension’s Class of Service, a keyset user may be able to dial additional digits after
their Intercom call...

Programming
Start
Is Continued
Dialing required for
Intercom calls?Set Class of Service
in 0406:57 to 1.
In 1005, assign the
COS programmed in
0406 to the extension.
Set Class of Service
in 0406:57 to 0.
Is Continued Dialing
required for local trunk
calls?Enable 0701:3 for a Toll
Restriction level.
In 0702:3 set the maximum
number of digits to be
dialed for a local call.
In 1004 assign a Toll
Restriciton COS to
each extension.
Is Continued Dialing
required for long
distance trunk calls?Enable 0701:4 for...

Programming (Cont’d)
➣
0406 - COS Options, Item 57: Continued Dialing
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to use Continued
Dialing for Intercom calls to 2500 type devices.
➣0701 - Toll Restriction Class, Item 3: Maximum Number of Digits in Local Call
Assign Program 0702 Item 3 entries to each Toll Restriction class.
➣0701 - Toll Restriction Class, Item 4: Maximum Number of Digits in Non-Local Call
Assign Program 0702 Item 4 entries to each Toll Restriction...

Cordless Telephone (Nitsuko 900i)
Description
 124i Available — requires Base 3.03 or
EXCPRU 3.03 or higher. 384i Available — requires system
software 3.07.10 or higher.
The Nitsuko 900i (P/N 85456D) is a 900 MHz digital cordless telephone that provides mobility, flexibility and
convenience for those who spend much of the workday away from their desk. Fully integrated with the tele-
phone system, the Nitsuko 900i offers many standard features such as Park, Page, Do Not Disturb, Hotline Voice
Over and...