Nitsuko 124i/384i Software Manual

Programming (Cont’d)
Department Calling with Overflow Message
No YesNo
YesNoYes NoYesCall routes to overflow
destination or disconnects -
as determined by other DISA
programming.Has DISA No Answer
Time expired (0405
Item 35)?
Caller hears VAU message,
Please hold on. . .
Caller hears ringback until
timer expires.Has DISA Overflow
Message Timer (0414
Item 4) expired?
Is an extension in the dialed
Department Calling Group
available?
System plays ringback to caller and starts DISA
Overflow Message Timer...

Programming (Cont’d)
➣
0116 - Tone Detection Setup
Use Items 1-10 to set the criteria for DTMF tones for inbound DTMF DISA calls.
➣ 0117 - Trunk CODEC Gain Type Settings
Customize the CODEC gain types (transmit and receive levels) for DISA trunks. Use 0901 Item 3 to as-
sign gain types to trunk circuits.
➣(384i Only) 0303 - DTMF and Dial Tone Detection Circuit Setup
Reserve at least one CDTU DTMF receiver for analog trunks DTMF reception (entry 2).
•Use the following as a guide when allocating DTMF...

Programming (Cont’d)
➣
1801 - DISA Password
For each DISA user, set the 6-digit password and DISA Class of Service for each user. In 384i, there are
15 users per Tenant Group, with one password and DISA Class of Service (1-15) for each user.  This al-
lows for up to 60 assignments. In 124i, there are 15 users with one password and one DISA Class of Serv-
ice assignment (1-10) for each user.  The DISA Class of Service cannot be 0. You cannot use Programs
0406 and 1005 to assign Class of Service to DISA...

Operation
To place a DISA call into the system (from any 2500 type telephone):
1. Dial the telephone number that rings the DISA trunk.
2. Wait for the DISA trunk to automatically answer with a unique dial tone.
3. Dial the 6-digit DISA password (access code).
4. Wait for a second unique dial tone.
5. Dial an extension (300-556).
OR
Dial 9 for Trunk Group Routing or ARS.
OR
Dial Alternate Trunk Route Access Code (if enabled).
OR
Dial 804 + a trunk group number (1-128 in 384i, 1-16 in 124i) for an outside...

Direct Station Selection (DSS) Console
Description
 124i Av a i l a b l e 384i Available
- Eight consoles maximum (two
maximum per extension).- 32 consoles maximum (four
maximum per extension.
- Storing additional digits after a Service
Code requires system software Base
2.13 or EXCPRU 2.18 or higher.- Storing additional digits after a
Service Code requires system
software 3.06/14 or higher.
- DSS Console flash rates may be
customized in Base 4.02 or
EXCPRU 4.20 or higher.- DSS Console flash rates may...

Description (Cont’d)
Conditions
If a 384i extension has four DSS Consoles connected, program one of the consoles for Direct Line Selection
(i.e., placing and answering outside calls). In 124i, press EXT.2 to access Direct Line Selection.
Default Setting
Disabled.
Features D-M
Direct Station Selection (DSS) Console
256   FEATURES92000SWG08  Issue 1-0 

Programming
Start
In 1101, assign DSS
Consoles to extensions.DSS number corresponds to console
installation number. There are eight
installations - with up to three consoles
connected at each installation.
Is DSS Console for
extensions or trunks?In 1102, select DSS
Console range 4. (Skip
to next step in 124i.)In 1102, select DSS
Console range 1-3. (Skip
to next step in 124i.)TrunksExtensions
Do you want to
customize the DSS
Consoles keys for
trunks?Do you want to
customize the DSS
Consoles keys for...

Programming (Cont’d)
NoYes No
In 1005, assign
Class of Service to
extensions.
In 0406 Item 28,
enter 0.In 0406 Item 28,
enter 1.Should the console
be able to use
Alternate Answer?NoYes NoYes Yes
Stop
Refer to Door Box
feature for
programming details.Do you want
user to call
Door Boxes?
Refer to Paging, External and
Paging, Internal features for
programming details.Do you want user to
make External and
Internal Paging?
Refer to Night Service
feature for
programming details.Do you want user to
change Night...

Programming (Cont’d)
➣
0401 - Tenant Group Options, Part A, Item 20: BLF Control and 
0406 - COS Options, Item 6: Automatic Off Hook Signaling
Programs 0401 Item 20 and 0406 Item 6 set the conditions under which a Hotline, Reverse Voice Over or
DSS Console key indicates that an extension is busy.  With condition 1 in the following chart, the BLF
LED is on only when both extension line appearances are busy.  In conditions 2-4, the BLF LED is on
when one line appearance is busy.
Program 0406:
 Item...

Related Features
Central Office Calls, Answering and Placing
A DSS Console can have line keys for placing and answering calls.
Door Box
The DSS Console provides one-touch calling and a Busy Lamp Field for Door Boxes.  Refer to the Door
Box Feature when programming Door Boxes.
Night Service
The DSS Console provides one-touch Night Service switching. Refer to the Night Service feature when
programming Night Service options.
One-Touch Calling
Like a One-Touch Key, a user can have DSS Console keys for Direct...