NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Pag e 4 12
Revision 2.0
UNIFORM CALL DISTRIBUTION (UCD) WITH OVERFLOW
To provide the LEDs on the Multiline Terminal for UCD Call Waiting Indication:
DESCRIPTION DATA
Assign the incoming call to queuing mode 
when all UCD stations are busy.(1) 212
(2) 1 : Queuing
Specify the maximum number of queuing in 
each UCD group for controlling call waiting 
lamp of a Multiline Terminal.
Note:Depending on the number of queuing
station/trunk, lamp indication pat-
tern on a Multiline Terminal...

ND-45670 (E) CHAPTER 2
Page 413
Revision 2.0
UNIFORM CALL DISTRIBUTION (UCD) WITH OVERFLOW
To provide an external indicator for UCD Call Waiting:
DESCRIPTION DATA
Assign the incoming call to queuing mode 
when all UCD stations are busy.(1) 212
(2) 1 : Queuing
Specify the maximum number of queuing in 
each UCD group for controlling external 
equipment Interface.(1) 15
(2) 01-99 (Number of queuing in each UCD 
group)
If no data is set, the default setting is 01.
Note:Depending on the number of queuing...

CHAPTER 2 ND-45670 (E)
Pag e 4 14
Revision 2.0
UNIFORM CALL DISTRIBUTION (UCD) WITH OVERFLOW
To provide the priority queuing for incoming trunk calls:
DESCRIPTION DATA
Specify the UCD Call Waiting Indicator indi-
cation pattern.(1) 00
(2) 01 : 30 IPM (1 sec. ON/OFF)
02: 60 IPM (0.5 sec. ON/OFF)
03: 120 IPM (0.25 sec. ON/OFF)
07: Steadily On
DESCRIPTION DATA
Assign Priority Queuing per trunk route. • YY=60
(1) Trunk Route No. (00-63)
(2) 0/1 : To be provided/Not to be 
provided
Assign Digit Conversion on...

ND-45670 (E) CHAPTER 2
Page 415
Revision 2.0
UNIFORM CALL DISTRIBUTION (UCD) WITH OVERFLOW
HARDWARE REQUIRED 
To provide the delay announcement for UCD: 
- PN-2DATA card
To provide the LEDs on the Multiline Terminal:
-ETJ-8-1/ETJ-16DC-1/ETJ-16DD-1/ETJ-24DS-1 and PN-2DLCB/PN-4DLCA card 
To provide the Indicator for UCD Call Waiting: 
- PN-DK00 card 
- External Indicator provided by the customer Requirement for External Indicator 
Control Method: Ground/Battery (Max.125 mA) 
Type: Visual and/or Audible...

CHAPTER 2 ND-45670 (E)
Pag e 4 16
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
PROGRAMMING
For an open numbering system: 
DESCRIPTION DATA
Assign an access code for LCR Group 0-3. • Y = 0-3 (Numbering Group 0-3)
(1) X-XXX (Access Code) 
(2) A26: LCR Group 0
A27: LCR Group 1 
A28: LCR Group 2 
A29: LCR Group 3 
Assign an Area Code Development Pattern 
No. to each LCR Group. • YYY = A00
(1) 0-3: LCR Group 0-3 
(2) 5-7: Area Code Development Pattern 
No. 5-7 
Assign a Route Pattern No. to each area code 
for...

ND-45670 (E) CHAPTER 2
Page 417
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
DESCRIPTION DATA
Assign the digits to be deleted from calls to 
distant offices. To delete all digits of an area 
code: • YYY = 500-755 (LCR Pattern No. 000-
255)
(1) 151 [Deletion of all digits of area code 
(NXX, 1NXX)] assigned by YYY 
= 405-407)
(2) 0: To be deleted
To delete the designated digit of an area code:  • YYY = 500-755
(1) 153 (Designation of digit to be deleted)
(2) 00: No digits deleted 
01: First digit deleted...

CHAPTER 2 ND-45670 (E)
Pag e 4 18
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
Example 1:
 When the PBX is an end office in a network employing an Open Numbering System, office A requires 
all the digits dialed on an incoming call from the PBX.
DESCRIPTION DATA
Assign the data for digit deletion to the re-
quired trunk routes for deleting the first one or 
two digits received from a distant office.• YY = 17
(1) 00-63 (Trunk Route No.) 
(2) 11: Delete first digit
12: Delete first two digits
If two digits...

ND-45670 (E) CHAPTER 2
Page 419
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
Programming for Example 1:
Example 2:
When the PBX is a Tandem Office in the network.
COMMAND CODE 1ST DATA 2ND DATA REMARKS
20 Y= 0 8 A26 Assignment of Access Code 8 of LCR
Group 0. 
8A YYY = A00
8A YYY = 405 
8A YYY = 405 
8A YYY = 405 
8A YYY = 0000
21
22
23
15
000
000
000
00000Assignment of Area Code Development
Pattern No. 5.
Assignment of Route Pattern 
No. 00 to Area Codes 21, 22, and 23.
Assignment of the order of LCR...

CHAPTER 2 ND-45670 (E)
Pag e 4 20
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
Programming for Example 2:
COMMAND CODE 1ST DATA 2ND DATA REMARKS
20 Y = 08A26Assignment of Access Code 8 of LCR Group
0.
8A YYY = A00 0 5Assignment of Area Code Development Pat-
tern No. 5.
8A YYY = 405 21 000Assignment of Route Pattern No. 01 to Area
Code 21 of office B. 
8A YYY = 405 838 800Assignment of Intra-Office Termination to
the office code 838.
8A YYY = 000 1 00001Assignment of the order of LCR selection
(1st) for...

ND-45670 (E) CHAPTER 2
Page 421
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
• For Closed Numbering System 
DESCRIPTION DATA
Assign an access code for LCR Group 3.  • YY = 0-3 (Numbering Group 0-3) 
(1) X-XXX (Access Code)
(2) A29: LCR Group 3 
Assign an Area Code Development Pattern 
No. to LCR Group 3. • YYY = A00
(1) 3: LCR Group 3 
(2) 5-7: Area Code Development Pattern 
No. 5-7 
Assign a Route Pattern No. to each area code 
for the Area Code Development Pattern No. 
assigned by CM8A YYY = A00.• YYY =...