NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Page 428 Addendum-001
Revision 2.1 JULY, 1998
VOICE MAIL INTEGRATION (IN BAND)
DESCRIPTION DATA
Assign the VMS station as the destination of a 
call from a station which is set Message.• YY = 15
(1) Tenant No. (00-63)
(2) X-XXXX: (VMS Station No.)
Assign the data to provide the MW lamp on a 
Multiline Terminal, if required.• YY = 00
(1) Primary Extension No. +     + Key No. 
(2) F1005
To access the VMS from SN610 ATTCON, 
assign Out Pulse (DTMF Signal) -Short/Long 
key.• YY = 00...

ND-45670 (E) CHAPTER 2
Page 429
Revision 2.0
VOICE MAIL TRANSFER
To transfer a call from an ATTCON to a VMS, if Camp-On is set to the transferred destination, and that is not 
answered by predetermined timing:
DESCRIPTION DATA
Provide the system with VMS transfer.(1) 428 (VMS transfer with Camp-On)
(2) 0: Provided
Specify timer of Attendant Recall for Camp-
On.•Y=0
(1) 00 (Attendant Recall Timer)
(2) 01: 0-2.4 sec.
14: 31.2-33.6 sec. (2.4 sec. increments) 
15: 28.8-38.4 sec.
24: 115.2-124.8 sec. (9.6...

CHAPTER 2 ND-45670 (E)
Pag e 4 30
Revision 2.0
VOICE MAIL TRANSFER
To transfer a call from an ATTCON or a station to a VMS by dialing of a Single Digit Feature Access Code “9” or
by pushing a function key, while hearing RBT or BT from the destination station:
To provide a Multiline Terminal with One Touch keys to send Called Number + DTMF Signal after the called party
answered, for VMS operations (such as “VMS Extension No. + Mail Box Number or Password”), refer to the pro-
gramming (2), (4) in the...

ND-45670 (E) CHAPTER 2
Addendum-002 Page 431
JANUARY, 1999 Revision 2.2
WHISPER PAGE
PROGRAMMING
DESCRIPTION DATA
Assign the Service Restriction Class to re-
quired stations.• YY=02
(1) X-XXXX: Station No.
(2) XX
 XX
Service Restriction Class A
(00-15 )
Specify the Service Restriction Class for
whispering station and whispered station.• YYY=111 (Whispering station’s class)
• YYY=112 (Whispered station’s class)
(1) 00-15: Service Restriction Class A
(2) 0 : Restricted
1 : Allowed
Assign the access code...

CHAPTER 2 ND-45670 (E)
Pag e 4 32
Revision 2.0
ASYNCHRONOUS DATA SWITCHING
2.2 Data Communications Features
PROGRAMMING
DESCRIPTION DATA
Assign a Data Station Number to the Primary 
Extension Number (assigned by CM10) of the 
Multiline Terminal equipped with a Data 
Adapter.(1)  Primary Extension Number (X-XXXX)
(2) Data Station Number (X-XXXX)
Specify the Data Station Number length. • Y = 0-3 (Numbering Plan Group 0-3)
(1) Leading one/two/three digits of Data Sta-
tion No.
(2) 801: Single digit
802: 2...

ND-45670 (E) CHAPTER 2
Page 433
Revision 2.0
ASYNCHRONOUS DATA SWITCHING
DESCRIPTION DATA
Assign the attribute data for Data Adapter in 
accordance with the specification of the DTE 
connected.•  YY = 00 (Detection of DTR signal from 
DTE)
(1)  Data Station No. (X-XXXX)
(2)  0/1 : Not detected/Detected
• YY = 01 (Automatic Answer)
(1) Data Station No. (X-XXXX)
(2) 0/1 : Automatic Answer/Selected by 
 Key
• YY = 04 (Data Transmission Speed)
(1) Data Station No. (X-XXXX)
(2) 00 : 50 bps
01 : 75 bps
02 :...

CHAPTER 2 ND-45670 (E)
Pag e 4 34
Revision 2.0
ASYNCHRONOUS DATA SWITCHING
DESCRIPTION DATA
• YY = 08 (Number of Stop Bits)
(1) Data Station No. (X-XXXX)
(2) 0/1 : 2-Stop Bits/1-Stop Bit
• YY = 09 (Type of Code)
(1) Data Station No. (X-XXXX)
(2) 00 : ASCII (7-bit) + even parity
01 : ASCII (7-bit) +odd parity
02 : ASCII (7-bit) + parity (0)
03 : ASCII (7-bit) + parity (1)
04 : JIS (7-bit) + even parity
05 :  JIS (7-bit) + odd parity
06 : JIS (8-bit)
07 : EBCDIC (8-bit)
15 : Non character (Binary Data)
•...

ND-45670 (E) CHAPTER 2
Page 435
Revision 2.0
ASYNCHRONOUS DATA SWITCHING
HARDWARE REQUIRED
SN1152 DTAM-A Data Adapter
ETJ-8-1/ETJ-16DC-1/ETJ-16DD-1/ETJ-24DS-1 and PN-2DLCB/4DLCA card
DTE 

CHAPTER 2 ND-45670 (E)
Pag e 4 36
Revision 2.0
DATA HOTLINE
PROGRAMMING
In addition to the programming of Asynchronous/Synchronous Data Switching, do the following programming to
the required data stations.
DESCRIPTION DATA
Assign the attribute data for the desired Data 
Hotline Stations.•  YY = 11 (Hotline Data Station)
(1)  Data Station No. (X-XXXX)
(2)  0 :  Hotline Data Station (Calling Side)
• YY = 12 (Hotline call originating meth-
od)
(1) Data Station No. (X-XXXX)
(2) 0 :  By pressing DATA key or...

ND-45670 (E) CHAPTER 2
Page 437
Revision 2.0
DATA HOTLINE-OUTSIDE
PROGRAMMING
In addition to the programming of Asynchronous/Synchronous Data Switching, do the following programming to
the required data stations.
DESCRIPTION DATA
Allocate the memory area for the Hotline-
Outside call.
For example, to assign the 10 Hotline-Outside 
calls into No. 100 through No. 109 Memory 
Slots, 2nd data is “100010”. Abbreviated 
numbers are automatically assigned as shown 
below.(1) 65: For Hotline-Outside
(2) XXX...