NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Pag e 4 22
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
DESCRIPTION DATA
To delete the designated digit of an area code:  • YYY = 500-755
(1) 153 (Designation of digit to be deleted) 
(2) 00: No digits deleted 
01: First digit deleted 
10: First 10 digits deleted 
CCC: No digits deleted
Assign the digits to be added when adding 
digits to those sent to a distant office. • YYY = 500-755
(1) 100 (Designation of digit Addition Pat-
tern No.)
(2) 00-49 (Digit Addition Pattern No....

ND-45670 (E) CHAPTER 2
Page 423
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
Example 1:
 When the PBX is an end office in a network employing a Closed Numbering System. 
Programming for Example 1:
COMMAND CODE 1ST DATA 2ND DATA REMARKS
20 Y = 0
20 Y = 0
8A YYY = A007
8
0A29
A29
5Assignment of Access Code (7, 8) to
LCR Group 3.
Assignment of Area Code Development
Pattern No. 5. 
8A YYY = 405 
8A YYY = 405 
8A YYY = 405 
8A YYY = 405 72
73
8
715000
000
000
804Assignment of Route Pattern No. 00 to
Area Code...

CHAPTER 2 ND-45670 (E)
Pag e 4 24
Revision 2.0
UNIFORM NUMBERING-VOICE & DATA
Example 2:
 When the PBX is a Tandem Office in the network.
Programming for Example 2:
COMMAND CODE 1ST DATA 2ND DATA REMARKS
20 Y= 0 7 A29 Assignment of Access Code 7 of LCR
Group 3. 
8A YYY= A00 3 5 Assignment  of  Area Code Development
Pattern No. 5. 
8A YYY= 405 740 001 Assignment of Route Pattern No. 01 to
Area Code 740 of Office B. 
8A YYY= 405 735 804 Assignment  of  the  4-digit  Intra-Office
Station to the Area Code...

ND-45670 (E) CHAPTER 2
Page 425
Revision 2.0
VARIABLE TIMING PARAMETERS
PROGRAMMING
DESCRIPTION DATA
Specify the required Timing Parameters ac-
cording to the user’s requirements. If no data 
is set (Displayed “NONE”) the Standard tim-
ing which is initially set is applied.•Y = 0-2
(1) XX  
(2) XX 
START
CM41
END
See the Command Manual. 

CHAPTER 2 ND-45670 (E)
Page 425-1 Addendum-001
Revision 2.1 JULY, 1998
VOICE GUIDE (1900 Series Enhancement)
PROGRAMMING
To provide the message that is sent when a station goes off hook while Message Waiting/Call Forwarding-All Calls/
No No Disturb service is set to the station:
DESCRIPTION DATA
Specify the Multi-Connection of the Dig-
ital Announcement Trunk (PN-2DATA)
on Announcement Service. (1) 124 
(2) 0/1 : Available/Not Available (Sin-
gle Connection)
Assign a Digital Announcement Trunk
Circuit...

ND-45670 (E) CHAPTER 2
Addendum-001 Page 425-2
JULY, 1998 Revision 2.1
VOICE GUIDE (1900 Series Enhancement)
Note 1:While both Message Waiting and Call Forwarding-All Calls/Do Not Disturb Service are set to the station,
the message assigned by CM49 YY=13 1st data 00 is sent.
Note 2:While Message Reminder (from STA/ATT) Service is set to the station, the message assigned by CM49
YY=13 1st data 00 is sent.
Note 3:While Split Call Forwarding-All Calls Service is set to the station, the message assigned by...

CHAPTER 2 ND-45670 (E)
Page 425-3 Addendum-001
Revision 2.1 JULY, 1998
VOICE GUIDE (1900 Series Enhancement)
To provide the Message which is sent when the service feature setting to the station is completed or cancelled:
HARDWARE REQUIRED
Digital Announcement Trunk (PN-2DATA)
DESCRIPTION DATA
Assign the function for each Digital An-
nouncement Trunk Circuit.• YY=00
(1) 000-127: Digital Announcement Trunk 
Circuit No. assigned by CM10 
(EB000-EB127)
(2) 17XX
: Voice Guide
Message No. used for this feature...

ND-45670 (E) CHAPTER 2
Addendum-001 Page 425-4
JULY, 1998 Revision 2.1
This page is for your notes. 

CHAPTER 2 ND-45670 (E)
Pag e 4 26
Revision 2.0
VOICE MAIL INTEGRATION (IN BAND)
PROGRAMMING 
In addition to the programming of CALL FORWARDING-ALL CALLS/BUSY LINE/NO ANSWER, do the fol-
lowing programming.
DESCRIPTION DATA
Specify whether Ringing Transfer to an At-
tendant via VMS is available.(1) 063
(2) 0/1 : Available/Not Available
Specify the sending of the Mail Box No. to the 
VMS when the VMS is recalled after transfer-
ring a call to an unanswered station.(1) 333
(2) 0: To be sent
1 : Not to be...

ND-45670 (E) CHAPTER 2
Addendum-002 Page 427
JANUARY, 1999 Revision 2.2
VOICE MAIL INTEGRATION (IN BAND)
DESCRIPTION DATA
Assign the access code to be sent out to a 
VMS after/before a Mail Box Number, if re-
quired.
Note 1:“C” or “D” should not be assigned
as the first digit of an access code, to
insert prepause timing. Prepause
timing is assigned by CM41 Y = 0,
Function No. 44. 
Note 2:If “C” is inserted in the access code,
it can be used as a pause (1.5 sec.).
To provide a programmable pause,
insert...