NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Pag e 3 56
Revision 2.0
PROPRIETARY MULTILINE TERMINAL: RING FREQUENCY CONTROL
PROGRAMMING 
To control the ring frequency by system data programming;
DESCRIPTION DATA
Enable the frequency control by system data 
programming.(1) 390 
(2)  1 : By System Data Programming 
Specify the ring frequency of each Multiline 
Terminal for internal calls. • CM12 YY = 07 [Service Restriction 
Class (C) (00-15 )] 
• CM15 YY = 83, 84
(1)  00-15 (Service Rest. Class (C) assigned 
by CM12 YY = 07)...

ND-45670 (E) CHAPTER 2
Page 357
Revision 2.0
PROPRIETARY MULTILINE TERMINAL: RING FREQUENCY CONTROL
To control the ring frequency at the Multiline Terminal:
HARDWARE REQUIRED 
Multiline Terminal and DLC card
DESCRIPTION DATA
Disable ring frequency by system data pro-
gramming.(1) 390 
(2) 0: By depressing FNC key and dialing 3 
(1) 262
(2) 0
Assign one of the following ring frequencies 
to each Multiline Terminal for internal calls.• CM12 YY = 07
(1) X-XXXX: Primary Extension No.
(2) XX: Service...

CHAPTER 2 ND-45670 (E)
Page 358 Addendum-002
Revision 2.2 JANUARY, 1999
PROPRIETARY MULTILINE TERMINAL: SOFT KEY
PROGRAMMING
DESCRIPTION DATA
Specify whether Soft Key feature is avail-
able to each Multiline Terminal.• YY=22
(1) X-XXXX: Primary Extension No. 
(2) 0 : Available
1 : Not available
Assign Soft Key Pattern to each Multiline
Terminal.• YY=23
(1) X-XXXX: Primary Extension No. 
(2) 0 : Soft Key Pattern No. 0
1 : Soft Key Pattern No. 1
2 : Soft Key Pattern No. 2
3 : Soft Key Pattern No. 3CM12...

ND-45670 (E) CHAPTER 2
Addendum-002 Page 359
JANUARY, 1999 Revision 2.2
PROPRIETARY MULTILINE TERMINAL: SOFT KEY
DESCRIPTION DATA
Assign the function of each Soft Key on each
status of the Multiline Terminal.
To the 2nd data of this command, the 2nd data
(F0XXX, F1XXX, F50XX) of CM90 should
be assigned except for Scroll Key data
(F5002).
The LED shows a maximum of 4 Soft Keys at
once. If assigning more than 4 Soft Keys on
one status, it is necessary to assign Scroll key
at every 4 keys (on 1st through...

CHAPTER 2 ND-45670 (E)
Page 359-1 Addendum-002
Revision 2.2 JANUARY, 1999
PROPRIETARY MULTILINE TERMINAL: SOFT KEY
NAME ASSIGNMENT
Character Code Table
234567
0
0@P \ p
1!1AQaq
2”2BRb r
3#3CSc s
4$4DTd t
5%5 EU e u
6&6 FV f v
7’7GWgw
8(8HXhx
9)9IYiy
A*:JZjz
B+;K[k{
C,N^n®
F/?O_o¬ 

ND-45670 (E) CHAPTER 2
Addendum-002 Page 359-2
JANUARY, 1999 Revision 2.2
PROPRIETARY MULTILINE TERMINAL: SOFT KEY
To provide the Soft Keys for NEAX Mail AD-8 live recording, assign the following data. (1900 Series Release 2
Enhancement)
HARDWARE REQUIRED 
Multiline Terminal with Soft Keys (DTP-8D-1, DTP-16D-1, DTP-32D-1) and DLC card 
DESCRIPTION DATA
Provide the Record key on the feature key of
the Muliline Terminal.• YY=00
(1) Primary Extension No. +   + Key No. 
(01-16)
(2) F1091 (Record)
Assign the...

CHAPTER 2 ND-45670 (E)
Page 359-3 Addendum-002
Revision 2.2 JANUARY, 1999
REMOTE HOLD
(1900 Series Release 2 Enhancement)
PROGRAMMING
DESCRIPTION DATA
Assign Service Restriction Class (A) to each
station.• YY=02
(1) X-XXXX: Station No. 
(2) XX: Service Restriction Class (A)
(00-15 )
Assign this service to Service Restriction
Class (A) assigned by CM12 YY=02.• YYY=124
(1) XX: Service Restriction Class (A) as-
signed by CM12 YY=02.
(2) 0: Allowed
Specify the recall timing for Remote Hold. • Y=0
(1) 06
(2)...

ND-45670 (E) CHAPTER 2
Addendum-002 Page 359-4
JANUARY, 1999 Revision 2.2
This page is for your notes. 

CHAPTER 2 ND-45670 (E)
Pag e 3 60
Revision 2.0
RESIDENT SYSTEM PROGRAM
PROGRAMMING 
No programming is required. (For the details of programmed system data, refer to the Command Manual.)  

ND-45670 (E) CHAPTER 2
Page 361
Revision 2.0
RETURN MESSAGE SCHEDULE DISPLAY
PROGRAMMING 
HARDWARE REQUIRED
ETJ-8-1/ETJ-16DC-1/ETJ-16DD-1/ETJ-24DS-1 and PN-2DLCB/PN-4DLCA card. 
DESCRIPTION DATA
Assign the Class of Service for setting a Re-
turn Message Schedule. •  CM12 YY = 02 
(1) X-XXXX (Station No.) 
(2) XX
XX
*a: Service Restriction Class A (00-
15 ) 
•  CM15 YY = 19 
(1) Service Restriction Class A (00-15) as-
signed by CM12 YY = 02
(2) 1 : Allowed 
Assign whether the call to a station, set for...