NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Page 348-2 Addendum-001
Revision 2.1 JULY, 1998
This page is for your notes. 

ND-45670 (E) CHAPTER 2
Page 349
Revision 2.0
PROPRIETARY MULTILINE TERMINAL: MULTIPLE LINE OPERATION
PROGRAMMING
HARDWARE REQUIRED 
Multiline Terminal and DLC card
DESCRIPTION DATA
Specify whether to enable ringing on call ter-
mination to flexible line keys and feature keys. • YY = 01
(1) Primary Extension No. +   + Key No. 
(2) 0/1 : Disabled/Enabled 
START
END
CM90
, 

CHAPTER 2 ND-45670 (E)
Page 349-1 Addendum-001
Revision 2.1 JULY, 1998
PROPRIETARY MULTILINE TERMINAL: MUTE KEY
(1900 Series Enhancement)
PROGRAMMING 
DESCRIPTION DATA
Assign the MUTE Key to the Multiline
Terminal.• YY=00
(1) Primary Extension No. +    + Key No.
(2) F5013 (MUTE)
START
END
CM90 , 

ND-45670 (E) CHAPTER 2
Addendum-001 Page 349-2
JULY, 1998 Revision 2.1
This page is for your notes. 

CHAPTER 2 ND-45670 (E)
Pag e 3 50
Revision 2.0
PROPRIETARY MULTILINE TERMINAL: OFF-HOOK VOICE ANNOUNCEMENT 
(1200 Series Enhancement)
PROGRAMMING 
DESCRIPTION DATA
Assign the Virtual-Line station No. for Off-
Hook Voice Announcement.(1) 0000-0255: Virtual LEN
(2) CX-CXXXX: Virtual-Line Station No. 
for Off-Hook Voice 
Announcement
Note:X-XXXX represents Primary Exten-
sion No. of Multiline Terminal.
Assign the Virtual-line station for Off-Hook 
Voice Announcement to the required Multi-
line Terminal.•...

ND-45670 (E) CHAPTER 2
Page 351
Revision 2.0
PROPRIETARY MULTILINE TERMINAL: OFF-HOOK VOICE ANNOUNCEMENT 
(1200 Series Enhancement)
HARDWARE REQUIRED
Multiline Terminal and DLC card
APR or APA Unit
DESCRIPTION DATA
Assign the Service Restriction Class of Voice 
Call Mike Off (called side) to the required 
Multiline Terminal.• CM12 YY = 07
(1) X-XXXX: Primary Extension No.
(2) XX: Service Restriction Class C 
(00-15 )
Note:This feature automatically turns the
Microphone off at the called station.• CM15 YY...

CHAPTER 2 ND-45670 (E)
Pag e 3 52
Revision 2.0
PROPRIETARY MULTILINE TERMINAL: PRIME LINE PICKUP
PROGRAMMING
HARDWARE REQUIRED 
Multiline Terminal and DLC card
DESCRIPTION DATA
Assign station or trunk to desired Multiline 
Terminal Extension as Prime Line. It is rec-
ommended that the Primary Extension be as-
signed as the Prime Line. (1) X-XXXX: Primary Extension No. 
(2) X-XXXX: Station No.
 Note 1, Note 2 
DXXX: Trunk No. D000-D255
Note 1:Primary Extension No. or Virtual
Line No. can be assigned to...

ND-45670 (E) CHAPTER 2
Page 353
Revision 2.0
PROPRIETARY MULTILINE TERMINAL: RECALL KEY
PROGRAMMING
For internal call: 
RECALL Key is initially assigned to all Multiline Terminals.
For internal call:
HARDWARE REQUIRED 
Multiline Terminal and DLC card
DESCRIPTION DATA
Assign the data for hookflash signal sending 
to the route number assigned by CM30 YY = 
00.• YY = 16
(1) Trunk Route No. (00-63)
(2) 1 : Sending
Assign a Flash Over Trunk key to the required 
Multiline Terminal.• YY = 00
(1) Primary...

CHAPTER 2 ND-45670 (E)
Pag e 3 54
Revision 2.0
PROPRIETARY MULTILINE TERMINAL: RELAY CONTROL FUNCTION
PROGRAMMING 
DESCRIPTION DATA
Assign the PN-DK00 card to the required 
LEN.
Note:The PN-DK00 card No. must be as-
signed to the first LEN (Level 0) and/
or the third LEN (Level 2) of each LT
slot.(1) LEN: 0000-0511
(2)  E800-E831: PN-DK00 card No.
For PIM0/1: E800-E807  
For PIM2/3: E808-E815 
For PIM4/5: E816-E823 
For PIM6/7: E824-E831 
Assign the function of relay control via Multi-
line Terminal to...

ND-45670 (E) CHAPTER 2
Page 355
Revision 2.0
PROPRIETARY MULTILINE TERMINAL: RELAY CONTROL FUNCTION
HARDWARE REQUIRED 
• PN-DK00 card
• External equipment provided locally 
• Multiline Terminal and DLC card 
• SN610 ATTCON and DLC card
To accommodate the external equipment, make the following connection at the MDF. For details, refer to the MDF
cross connection for an External Equipment in the INSTALLATION PROCEDURE MANUAL. 
o
PN-DK00 CARD
PZ-PW86 CARD
GMDFEXTERNAL
EQUIPMENT
G