NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Pag e 2 60
Revision 2.0
INTERNAL ZONE PAGING WITH MEET-ME
To provide All Zone Internal Paging:
DESCRIPTION DATA
Provide the system with All Zone Internal 
Paging. (1) 158 
(2)  1 : Available
Assign the Class of Service for All Zone 
Internal Paging to the required stations.• CM12 YY = 02
(1)  X-XXXX: Station No. 
(2) XX
 XX
*a: Service Restriction Class (A) 
(00-15 ) 
•  CM15 YY = 49
(1)  00-15: Service Restriction Class (A) 
assigned by CM12 YY = 02 
(00-15 ) 
(2)  1 : Allowed...

ND-45670 (E) CHAPTER 2
Page 261
Revision 2.0
LAST NUMBER REDIAL
PROGRAMMING
To provide SN610 ATTCON with this feature (1200 Series Enhancement).
DESCRIPTION DATA
Provide the system with Last Number Redial. (1)  177
(2)  0: Available
Specify the capability for internal calls with 
this feature. If the data for CM08-178 is set to 
“0”, this feature will only be applied to 
outgoing calls.(1) 178
(2)  0/1 : Not available/Available
Assign the access code for Last Number 
Redial.•  Y = 0-3 (Numbering Plan...

CHAPTER 2 ND-45670 (E)
Pag e 2 62
Revision 2.0
LEAST COST ROUTING-3/6-DIGIT
PROGRAMMING 
DESCRIPTION DATA
Assign the access code for LCR Group 0-2.  •  Y = 0-3 (Number Plan Group 0-3)
(1) X-XXX (Access Code) 
(2)  A26: LCR Group 0
A27: LCR Group 1 
A28: LCR Group 2
Assign the Toll Restriction Patterns with five 
kinds of Trunk Restriction Classes assigned 
by CM12 YY = 01. 
Toll Restriction Patterns 00-15 are 
preassigned as shown below. 
If a new Restriction Pattern is required, 
change the data for...

ND-45670 (E) CHAPTER 2
Page 263
Revision 2.0
LEAST COST ROUTING-3/6-DIGIT
DESCRIPTION DATA
Specify the order of LCR selection for the 
Route Pattern No. assigned by YYY = 405-
407.•  YYY = 000-063 (Route Pattern No. 
00-63)
(1)  1-4: Order of LCR Selection
1: 1st
2: 2nd
3: 3rd
4: 4th
(2) XXX
 XX
*a: 000-255 (LCR Pattern No. 000-255)
*b: 00-63 (Trunk Route No. 00-63)
For area code deletion, designate the digits to 
be deleted. •  YYY = 500-755 (LCR Pattern No. 
000-255) 
To delete all digits of the area...

CHAPTER 2 ND-45670 (E)
Pag e 2 64
Revision 2.0
LEAST COST ROUTING-3/6-DIGIT
DESCRIPTION DATA
If three-digit Toll Restriction is provided, 
assign the Toll Restriction Pattern No. to the 
LCR Pattern No.
If six-digit Toll Restriction is provided, assign 
the following data to the LCR Pattern No. and 
set up the six-digit Toll Restriction Pattern 
Ta b l e s .
(1) Specify the Trunk Restriction Classes to 
which 6-digit Toll Restriction applies.
Example:
 412
 - 211
Area Code Office Code
RCA: No...

ND-45670 (E) CHAPTER 2
Page 265
Revision 2.0
LEAST COST ROUTING-3/6-DIGIT
DESCRIPTION DATA
If the Prefix is to be added, assign the 
following data to the LCR Pattern No.
(1) Assign the 6-digit Prefix Pattern No. to 
the LCR Pattern No. •  YYY = 500-755 (LCR Pattern No. 
000-255) 
(1) 150 
(2) 00:  6-digit Prefix Pattern No. 00 
49: 6-digit Prefix Pattern No. 49
50:  Prefix is to be added regardless 
of Office Code.
CCC: No Prefix
(2) Assign the office code (three digits), re-
quiring the Prefix, to the...

CHAPTER 2 ND-45670 (E)
Pag e 2 66
Revision 2.0
LEAST COST ROUTING-3/6-DIGIT
To provide L.C.R. with Time of Day Routing, add the following system data programming.
DESCRIPTION DATA
Assign the Date Pattern No. to each area code 
for the Area Code Development Pattern No. 
assigned by YYY = A00.•  YYY = 405-407(Area Code Develop-
ment Pattern No. 5-7) 
(1)  X-X...X (Area Code Max. 8 digits)
(2)  300-303 (Date Pattern No. 0-3) 
Assign the Time Pattern No. to each day of 
the week for the Date Pattern No....

ND-45670 (E) CHAPTER 2
Page 267
Revision 2.0
LEAST COST ROUTING-3/6-DIGIT
DESCRIPTION DATA
Assign the Route Pattern No. to the required 
time of day for the Time Pattern No. assigned 
by YYY = 300-303.•  YYY = 200-207 (Time Pattern No. 00-
07) 
(1) XX
 XX (Time)
*a: Hours (00-23) 
*b: Minutes (00/30) 
To define the following Time Pattern: 
If the Tenant Pattern No. is assigned by YYY 
= 200-207, assign the Route Pattern No. to 
the required Tenant No. for the Tenant 
Pattern No.(2)  000-063 (Route...

CHAPTER 2 ND-45670 (E)
Pag e 2 68
Revision 2.0
LEAST COST ROUTING-3/6-DIGIT
To provide C.O. operator call with LCR, assign the following system data.
DESCRIPTION DATA
Assign the access code for LCR Group 0.  •  Y = 0-3 (Number Plan Group 0-3) 
(1) X-XXX (Access Code) 
(2)  A26: LCR Group 0 
Assign the Toll Restriction Patterns with five 
kinds of Trunk Restriction Classes assigned 
by CM12 YY = 01. Toll Restriction Pattern 
00-15 is already programmed as shown 
below. If a new Restriction Pattern is...

ND-45670 (E) CHAPTER 2
Page 269
Revision 2.0
LEAST COST ROUTING-3/6-DIGIT
Figure 2-1  LCR Development Sequence DESCRIPTION DATA
Assign the 1st order of LCR selection for the 
Route Pattern No. assigned by YYY = 410.•  YYY = 000-063 (Route Pattern No. 00-
63) 
(1)  1: 1st order of LCR selection 
(2) XXX
 XX 
*a: 000-255 (LCR Pattern No. 000-255)
*b: 00-63 (Trunk Route No. 00-63) 
Assign the Toll Restriction Pattern No. to the 
LCR Pattern No. assigned by YYY = 410. •  YYY = 500-755 (LCR Pattern No....