NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Pag e 2 50
Revision 2.0
INDIVIDUAL ATTENDANT ACCESS
PROGRAMMING 
DESCRIPTION DATA
Assign an Attendant Console Number to 
each SN610 ATTCON.(1) 0000-0511 (LEN) 
(2) E000-E007 (SN610 ATTCON No.) 
Assign the access code for Individual 
Attendant Access. • Y = 0-3 (Numbering Plan Group 0-3) 
(1) X-XXX (Access Code) 
(2) 095
Specify the Individual Attendant Access 
capability provided from a station belonging 
to a different tenant. (1) 143
(2) 0/1 : Restricted/Allowed
START
END
CM10...

ND-45670 (E) CHAPTER 2
Page 251
Revision 2.0
INTERCEPT ANNOUNCEMENT
PROGRAMMING 
DESCRIPTION DATA
Assign a Digital Announcement Trunk 
Circuit No. to the required LEN.
Note:The Digital Announcement Trunk
Circuit No. must be assigned to the
first LEN (Level 0) and/or the third
LEN (Level 2) of each LT slot. (1) LEN (0000-0511) 
(2) EB000-EB127: Digital Announcement 
Trunk Circuit No. 
For PIM0/1: EB000-EB031  
For PIM2/3: EB032-EB063 
For PIM4/5: EB064-EB095 
For PIM6/7: EB096-EB127 
Assign Service...

CHAPTER 2 ND-45670 (E)
Pag e 2 52
Revision 2.0
INTERCOM: MANUAL INTERCOM
PROGRAMMING 
DESCRIPTION DATA
Assign a Manual Intercom number to the 
Virtual LEN. The last two digits of each 
Manual Intercom Number represent the 
Manual Intercom Group Number. 
Note:A Manual Intercom group can con-
sist of two to six Multiline Termi-
nals. A maximum of 25 Manual
Intercom groups can be assigned
per system. 
MANUAL 
INTERCOM
 
GROUPINTERCOM GROUP
00 A200, A300, A400, A500, A600, A700
01 A201, A301, A401, A501,...

ND-45670 (E) CHAPTER 2
Page 253
Revision 2.0
INTERCOM: AUTOMATIC INTERCOM
PROGRAMMING
Note:To activate the Voice Announcement call, refer to INTERNAL TONE/VOICE SIGNALING.
DESCRIPTION DATA
Assign an Automatic Intercom number to the 
Virtual LEN. The Automatic Intercom 
Stations are paired as shown below. 
GROUP No. 
INTERCOM NUMBER 
00 A000, A100
 01  A001, A101
 31  A031, A131
Note:The maximum number of Automatic
Intercom paired stations per system
is 32.(1) 0000-0255 (Virtual LEN) 
(2) A000-A031...

CHAPTER 2 ND-45670 (E)
Pag e 2 54
Revision 2.0
INTERCOM: AUTOMATIC INTERCOM
DESCRIPTION DATA
Specify the busy indication on the Automatic 
Intercom LED when the other Multiline 
Terminal of the same Automatic Intercom 
Group is busy.•YY = 11
(1) X-XXXX: Primary Extension Number 
(2) 0 : Allowed
1 : Restricted
END
CM13
A 

ND-45670 (E) CHAPTER 2
Page 255
Revision 2.0
INTERCOM: DIAL INTERCOM
PROGRAMMING 
DESCRIPTION DATA
Assign a Dial Intercom number to the Virtual 
LEN. The last two digits of each Dial 
Intercom No. represent the Dial Intercom 
Group No. 
The first digit is the intercom code (0-9) 
assigned to the associated virtual extension.
GROUP No.
INTERCOM No. 
00 B000, B100, B200 — B900
01 B001, B101, B201 — B901
24 B024, B124, B224 — B924
Note:A maximum of 25 Dial Intercom
groups are available per system. A
maximum...

CHAPTER 2 ND-45670 (E)
Pag e 2 56
Revision 2.0
INTERCOM: DIAL INTERCOM
Note:To activate the Voice Announcement call, refer to INTERNAL TONE/VOICE SIGNALING.
DESCRIPTION DATA
If the Private Dial Intercom is provided, 
assign the data to disable Executive Override 
to each Dial Intercom. •  CM12 YY = 02 
(1)  BXXX: Dial Intercom No. assigned by 
CM11.
(2) XX
XX
*a: Service Restriction Class (A) 
(00-15 ) 
•  CM15 YY = 09
(1)  Service Restriction Class (A) (00-15) 
assigned by CM12 YY = 02 
(2) 0:...

ND-45670 (E) CHAPTER 2
Page 257
Revision 2.0
INTERNAL TONE / VOICE SIGNALING
PROGRAMMING
DESCRIPTION DATA
To activate the Single-Digit Feature Access 
Code feature, set the data for 050, 051, 069 
and 148 to “1”.(1) 050: * Button as Switch Hook Flash.
(2) 1 : Ineffective
(1) 051: # Button as Switch Hook Flash.
(2) 1 : Ineffective
(1)  069: Single Digit Dialing on BT 
Connection
(2)  1 : Step Call
(1)  148: Same Last Digit Redialing on BT 
Connection
(2) 1 : Ineffective
Provide the System with the...

CHAPTER 2 ND-45670 (E)
Pag e 2 58
Revision 2.0
INTERNAL TONE / VOICE SIGNALING
DESCRIPTION DATA
Assign the Class of Service for Voice Call 
Mike Off (called side) to the required 
Multiline Terminal.•  CM12 YY = 07
(1)  X-XXX: Primary Extension No.
(2)  XXX: Service Restriction Class (C) (00-
15 )
•  CM15 YY = 99
(1)  XX: Service Restriction Class (C) 
assigned by CM12 YY = 07
(2)  0: Available
Assign the Voice Call/Ring Tone 
Programming access code.•  Y = 0-3 (Numbering Plan Group 0-3)
(1)  X-XXX:...

ND-45670 (E) CHAPTER 2
Page 259
Revision 2.0
INTERNAL ZONE PAGING WITH MEET-ME
PROGRAMMING
To provide Internal Zone Paging with Meet-Me:
DESCRIPTION DATA
Assign the Class of Service for Internal Zone 
Paging to the required stations.•  CM12 YY = 02 [Service Rest. Class 
(A) (00-15 )] 
•  CM15 YY = 49
(1)  Service Restriction Class (A) assigned 
by CM12 YY = 02, (00-15) 
(2)  1 : Allowed 
Assign Internal Zone Paging access codes and 
Meet-Me answer codes, as required.•  Y = 0-3 (Numbering Plan Group 0-3)...