NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Pag e 2 24
Revision 2.0
ENHANCED 911
DESCRIPTION DATA
Assign the LCR data, as the occasion 
demands.YYY
(1) See CM8A in the Command Manual.
Assign the calling station number sent to the 
network.
“*”, “#” are not available for the sending 
number.• YY=12 (Calling Number assignment)
(1) X-XXXX: Station number
(2) X-XXXX: Sending number
Assign the Local Office Code Table number 
for sending the calling office code to the 
network.• YY=13 (Local Office Code Table No.)
(1) X-XXXX:...

ND-45670 (E) CHAPTER 2
Page 225
Revision 2.0
EXECUTIVE CALLING
PROGRAMMING 
DESCRIPTION DATA
Assign VIP class to the required station. •  YY = 21
(1)  X-XXXX: Station Number 
(2)  0: To be providedCM13 START
END 

CHAPTER 2 ND-45670 (E)
Pag e 2 26
Revision 2.0
EXECUTIVE OVERRIDE
PROGRAMMING 
DESCRIPTION DATA
Assign Service Restriction Class (A) to each 
station. •  YY = 02
(1) X-XXXX (Station No.) 
(2) XX
XX
 
 *a: Service Restriction Class (A) 
(00-15 ) 
Assign this feature to the Service Restriction 
Class (A) assigned by CM12 YY = 02. The 
setting of data for both called side and calling 
side of Executive Override (YY = 05 and YY 
= 09) are required.•  YY = 05 and YY = 09
(1)  XX : Service Restriction Class...

ND-45670 (E) CHAPTER 2
Page 227
Revision 2.0
EXTERNAL PAGING WITH MEET-ME
PROGRAMMING
DESCRIPTION DATA
Assign the Paging Trunk (PN-4COT and PN-
DK00) to the required LEN. 
Note:The PN-DK00 card No. must be as-
signed to the first LEN (Level 0)
and/or third LEN (Level 2) (1)  LEN (0000-0511) 
(2) D000-D255: PN-4COT 
E800-E831: PN-DK00 
E800-E807: For PIM0/1 
E808-E815: For PIM2/3
E816-E823: For PIM4/5
E824-E831: For PIM6/7
Assign the Class of Service for Paging 
Access to the required stations. •  CM12 YY...

CHAPTER 2 ND-45670 (E)
Pag e 2 28
Revision 2.0
EXTERNAL PAGING WITH MEET-ME
DESCRIPTION DATA
Assign the access code for Paging Access 
and answer.•  Y = 0-3 (Numbering Plan Group 0-3) 
(1)  X-XXX: Access Code (86) 
(2)  100-163 : For Paging Access (Route 
00-63) (07) 
  070-079 : For Paging Access/ Paging 
Answer (Paging Answer 
Zone 0-9)
  080 : Canceling of Paging (De-
lay Operation) 
Assign the data for Paging Trunk to the trunk 
number assigned by CM10.•  YY = 00 (Trunk Route Allocation) 
(1) Trunk...

ND-45670 (E) CHAPTER 2
Page 229
Revision 2.0
EXTERNAL PAGING WITH MEET-ME
To provide an Attendant Console with a Paging Key (1200 Series Enhancement):
DESCRIPTION DATA
Assign the access code for Paging Answer. •  Y = 0-3 (Numbering Plan Group 0-3) 
(1)  X-XXX: Access Code
(2) 070-079 : For Paging Access/Paging 
Answer (Paging Answer 
Zone 0-9)
080 : Canceling of Paging (De-
lay Operation)
Assign the data for Paging Trunk to the trunk 
number assigned by CM10 as follows. •  YY = 00 (Trunk Route...

CHAPTER 2 ND-45670 (E)
Pag e 2 30
Revision 2.0
EXTERNAL PAGING WITH MEET-ME
HARDWARE REQUIRED
Paging Trunk (PN-4COT) ´ n/4 (n: Number of Zones of external paging) 
PN-DK00 card
Paging Equipment provided locally.
To accommodate the Paging Equipment, make the following connections at the MDF. For details, refer to the 
MDF cross connection for Paging Equipment in the INSTALLATION PROCEDURE MANUAL.
DESCRIPTION DATA
Assign a Paging key to SN610 ATTCON, as 
required.(1) ATTCON No. +  + Key No.
(2) F6150:...

ND-45670 (E) CHAPTER 2
Page 231
Revision 2.0
FAX ARRIVAL INDICATOR
PROGRAMMING 
DESCRIPTION DATA
Assign the fax call station number. This 
number is used as the fax call indicator button 
on the Multiline Terminal. Also this is the 
number to which the incoming fax call is 
directed. (1) LEN Number (0000-0511) 
(2)  X-XXXX : Single Line Station No. 
FX-FXXXX : Primary Extension No. 
Assign a virtual number to be used as a fax 
call station number. (Similar to CM10 above 
but using a virtual extension...

CHAPTER 2 ND-45670 (E)
Pag e 2 32
Revision 2.0
FAX ARRIVAL INDICATOR
DESCRIPTION DATA
Assign the fax station using the House Phone 
feature. •  YY = 14 
(1)  00-03: Fax Station (This is the actual 
single line port to be connected 
to the facsimile machine.) 
(2)  X-XXXX: Station No. 
Assign the fax call station number as the 
arrival indicator to the Multiline Terminal.•  YY = 14
(1)  Primary Extension No. + comma (,) + 
key number
(2)  X-XXXX: Fax Call Station No. 
END
CM51
A
CM90 

ND-45670 (E) CHAPTER 2
Page 233
Revision 2.0
FLEXIBLE LINE KEY ASSIGNMENT
PROGRAMMING 
To indicate the busy/idle status of the extensions accommodated to the Flexible Line Keys on the Series E Terminal
without the One Touch Speed Dial Keys, assign the following data. (1800 Series Enhancement)
DESCRIPTION DATA
Specify whether 1000-Slot Memory Block
has 26 digits or 16 digits memory buffers.
Note 1: 
When CM08-252 is assigned as 0, 
only 3000 Station Speed Dialing 
numbers can be assigned, and 
1000-Slot...