NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Pag e 1 74
Revision 2.0
CONSECUTIVE SPEED DIALING
PROGRAMMING
1. To provide an Extension Memory card (PN-ME00) for extending memory for Station Speed Dialing and
One Touch keys:
DESCRIPTION DATA
Assign a slot number to the Extension 
Memory card. The slot number is given by 
the SENSE switch on the Extension Memory 
card.
Provide the system with the Extension 
Memory card.(1) 04-15 (Slot Number)
(2) 19 (PN-ME00 card)
(1) 56
(2) 1: To be provided
Note:The SPN-AP00A card must be...

ND-45670 (E) CHAPTER 2
Page 175
Revision 2.0
CONSECUTIVE SPEED DIALING
2. To provide Single Line Telephone or Multiline Terminal:
DESCRIPTION DATA
Specify whether 1000-Slot Memory Block 
has 26 digits or 16 digits memory buffers.
Note 1:When CM08-252 is assigned as 0,
only 3000 Station Speed Dialing 
numbers can be assigned, and 
1000-Slot Memory Block No. 0-2 
contains 26-digits memory buffers.
When CM08-252 is assigned as 1,
4500 Station Speed Dialing numbers
can be assigned, and 1000-Slot 
Memory...

CHAPTER 2 ND-45670 (E)
Pag e 1 76
Revision 2.0
CONSECUTIVE SPEED DIALING
DESCRIPTION DATA
Specify “*” dialing is set as programmable 
pause by CM41-38 or dialed digit when the 
DTMF station or Multiline Terminal dials 
“*” in the setting of the Station Speed Dialing 
feature.(1) 171
(2) 0/1 :Programmable pause by CM41-
38/Dialed digit
Allocate the memory area for Station Speed 
Dialing to each station. The memory block 
for storing one called number of Station 
Speed Dialing is called a “Memory Parcel”....

ND-45670 (E) CHAPTER 2
Page 177
Revision 2.0
CONSECUTIVE SPEED DIALING
DESCRIPTION DATA
Note 1:
If the system provides the Extension Memory card, 1000-Slot Memory Block No. 8-F (8000
Memory Parcels) can be used. For using this memory area, there are several conditions as
mentioned below: 
• This memory area cannot be used for Speed Dialing with Speed Dialing keys provided
by CM90-second data: F11XX on a Multiline Terminal, and cannot also be used for
System Speed Dialing.
• When exchanging an Extension...

CHAPTER 2 ND-45670 (E)
Pag e 1 78
Revision 2.0
CONSECUTIVE SPEED DIALING
DESCRIPTION DATA
Assign Station Speed Dialing keys on each 
Multiline Terminal, if required.• YY=00
(1) Primary Extension No. +   + Key No. 
(01-24)
(2) F11XX
 
*a 
*a: 00: Station Speed Dialing 00 
99: Station Speed Dialing 99
CM90
C
END
, 

ND-45670 (E) CHAPTER 2
Page 179
Revision 2.0
CONSECUTIVE SPEED DIALING
3. To provide Multiline Terminal with One Touch keys (ETJ-16DD-1/ETJ-24DS-1/DTP-32-1/DTP-32D-1):
DESCRIPTION DATA
Specify whether 1000-Slot Memory Block 
has 26 digits or 16 digits memory buffers.
Note 1:When CM08-252 is assigned as 0,
only 3000 Station Speed Dialing
numbers can be assigned, and
1000-Slot Memory Block No. 0-2
contains 26-digits memory buffers.
When CM08-252 is assigned as 1,
4500 Station Speed Dialing num-
bers can be...

CHAPTER 2 ND-45670 (E)
Pag e 1 80
Revision 2.0
CONSECUTIVE SPEED DIALING
DESCRIPTION DATA
Allocate the memory area for Station Speed 
Dialing to each station. 
The memory block for storing one called 
number of Station Speed Dialing is called a 
“Memory Parcel”. 
An assembly of 10-Memory Parcels is called 
a “10 Slot Memory Block,” and one hundred 
10-Slot Memory Blocks are called a “1000-
Slot Memory Block”.(1) X-XXXX (Primary Extension No.)
(2) X
 XX 0 XX 
*a *b  *c 
*a: 1000-Slot Memory Block No....

ND-45670 (E) CHAPTER 2
Page 181
Revision 2.0
CONSECUTIVE SPEED DIALING
To provide System Speed Dialing:
DESCRIPTION DATA
Assign Service Restriction Class (A) to each 
station. • YY = 02
(1) X-XXXX (Station No.)
(2) XX
 XX
*a: Service Restriction Class (A)
 00-15
Assign this service to Service Restriction 
Class (A) assigned by CM12 YY = 02.• YY = 06 (System Speed Dialing)
(1) XX (Service Rest. Class (A) assigned 
by CM12 YY = 02) 
(2) 1  Allowed
Assign the Access Code for System Speed 
Dialing.• Y = 0-3...

CHAPTER 2 ND-45670 (E)
Pag e 1 82
Revision 2.0
CONSECUTIVE SPEED DIALING
DESCRIPTION DATA
Set a stored number to each Memory Slot 
Number allocated by CM71, as needed.(1) Memory Slot No. (000-299) 
(2) Stored Number (Max. 26 digits) 
Stored Number: Outgoing Access Code 
(Max. 2 digits) +     + Stored Number 
(Max. 26 digits) 
To set a pause into the Stored No., enter
“C” (Fixed pause = 1.5 sec.) or “D” (Pro-
grammable pause specified by CM41-
38) after desired digits.
Specify the System Speed Dialing...

ND-45670 (E) CHAPTER 2
Page 183
Revision 2.0
CONSULTATION HOLD
PROGRAMMING
DESCRIPTION DATA
Select the ringing pattern on station calls 
with a trunk line placed in Consultation Hold.(1) 137 
(2) 0: Change from Internal Ringing 
(CM08-138) to External Ringing 
(CM35 YY = 33) when transfer-
ring a call
1  External Ringing (CM35 YY = 33)
Assign the Service Restriction Class (C) to 
each station. • YY = 07
(1) X-XXXX (Station No.)
(2) XX
*a: Service Rest. Class (C) (00-15t) 
Assign the Switch Hook Flash...