NEC Neax2000 Ivs Feature Programming Manual

CHAPTER 2 ND-45670 (E)
Pag e 2 90
Revision 2.0
MISCELLANEOUS TRUNK ACCESS: CODE CALLING EQUIPMENT ACCESS
Note:For assigning the Class of Service for this feature, refer to CLASS OF SERVICE.
DESCRIPTION DATA
Assign the paging function to the PN-DK00 
card. (1) XX X
*a: Card No. (00-31) assigned by 
CM10 (E800-E831) 
*b: Circuit No. of PN-DK00 (0-3) 
(2) 02 XX
: Zone assigned by CM30 YY =
 28 
*a 00: Speaker Paging Zone 0 
  09: Speaker Paging Zone 9 
Assign the access code for this service. •  Y = 0-3...

ND-45670 (E) CHAPTER 2
Page 291
Revision 2.0
MISCELLANEOUS TRUNK ACCESS: DICTATION EQUIPMENT ACCESS
PROGRAMMING 
Note:For assigning the Class of Service for this feature, refer to CLASS OF SERVICE.DESCRIPTION DATA
Assign the Trunk Number to the required 
LEN.(1) LEN (0000-0511) 
(2)  Trunk No. (D000-D255)
Assign the Trunk data to the Trunk Number. •  YY = 00 (Trunk Route Allocation)
(1)  Trunk No. (000-255)
(2)  Trunk Route No. (00-63)
(Dedicated route number for this service
should be assigned)
•  YY =...

CHAPTER 2 ND-45670 (E)
Pag e 2 92
Revision 2.0
MISCELLANEOUS TRUNK ACCESS: FOREIGN EXCHANGE (FX) ACCESS
PROGRAMMING 
In addition to the programming of Direct Outward Dialing, assign an FX line to the required trunk routes as shown
below:
Note:For assigning the Class of Service for this feature, refer to CLASS OF SERVICE. DESCRIPTION DATA
Assign an FX line to the required trunk route. •  YY = 00 
(1)  Trunk Route No. (00-63) 
(2)  01: FX lineCM35 START
END 

ND-45670 (E) CHAPTER 2
Page 293
Revision 2.0
MISCELLANEOUS TRUNK ACCESS: RADIO PAGING EQUIPMENT ACCESS
PROGRAMMING 
DESCRIPTION DATA
Assign the trunk used for interfacing with the 
Radio Paging Equipment to the required LEN.(1) LEN (0000-0511)
(2)  Trunk No. (D000-D255)
Assign the Class of Service for Paging Access 
to the required stations.•  CM12 YY = 02
[Service Rest. Class A (00-15 )]
•  CM15 YY = 08
(1)  Service Rest. Class A (00-15) assigned 
by CM12 YY = 02
(2) 1 : Allowed
Specify the timing for...

CHAPTER 2 ND-45670 (E)
Pag e 2 94
Revision 2.0
MISCELLANEOUS TRUNK ACCESS: RADIO PAGING EQUIPMENT ACCESS
DESCRIPTION DATA
Assign the access code for Paging Access 
and Answer.•  Y = 0-3 (Numbering Plan Group 0-3) 
(1)  X-XXX: Access Code
(2)  100-163: For Paging Access (Route 
00-63)
070-079: For Paging Answer (Paging 
Answer Zone 0-9)
Assign the data for Radio Paging to the 
desired trunk number. •  YY = 00 (Trunk Route Allocation) 
(1) Trunk No. 
(2)  Route No. (00-63)
•  YY = 28 (Zone/Kind of Paging)...

ND-45670 (E) CHAPTER 2
Page 295
Revision 2.0
MISCELLANEOUS TRUNK ACCESS: RADIO PAGING EQUIPMENT ACCESS
DESCRIPTION DATA
Assign the route data to the route number 
assigned by CM30 YY = 00. •  YY = 00
(1)  Route No. (00-63)(07)
(2) 05
•  YY = 08 (Dial Sending to Radio Paging 
Equipment) 
(1)  Route No. (00-63)
(2)  3 : Dial Pulses are sent out 
•  YY = 13 (Max. number of sending dig-
its) 
(1)  Route No. (00-63)
(2) 000: Unlimited 
001: 1 digit of Radio No. and calling 
Station number.
004: 4 digits of...

CHAPTER 2 ND-45670 (E)
Pag e 2 96
Revision 2.0
MISCELLANEOUS TRUNK ACCESS: RADIO PAGING EQUIPMENT ACCESS
DESCRIPTION DATA
Assign the access code for each Paging 
Answer Zone. •  Y = 0-3 (Numbering Plan Group 0-3) 
(1)  X-XXX: Access Code
(2)  070-079: Paging Answer Zone 0-9 
Assign the data for Radio Paging to the trunk 
number, assigned by CM10, as follows: •  YY = 00 (Trunk Route Allocation) 
(1) Trunk No. 
(2)  Route No. (50-59)
•  YY = 28 (Zone/Kind of Paging)
(1) Trunk No. 
(2) X
 X
*a: Paging...

ND-45670 (E) CHAPTER 2
Page 297
Revision 2.0
MISCELLANEOUS TRUNK ACCESS: RADIO PAGING EQUIPMENT ACCESS
HARDWARE REQUIRED 
• PN-4COT card 
• Radio Paging Equipment provided locally
DESCRIPTION DATA
Assign the route data to the route number 
assigned by CM30 YY = 00. •  YY = 00
(1)  Route No. (50-59)
(2) 05
•  YY = 08 (Dial Sending to Radio Paging 
Equipment) 
(1)  Route No. (50-59)
(2)  3 : Dial Pulses are sent out 
•  YY = 13 (Max. number of sending dig-
its)
(1)  Route No. (50-59)
(2) 000: Unlimited...

CHAPTER 2 ND-45670 (E)
Pag e 2 98
Revision 2.0
MISCELLANEOUS TRUNK ACCESS: WIDE AREA TELEPHONE SERVICE (WATS) ACCESS
PROGRAMMING 
In addition to the programming of Direct Outward Dialing, assign an WATS line to the required trunk route, as
shown below:
Note:For assigning the Class of Service for this feature, refer to CLASS OF SERVICE. DESCRIPTION DATA
Assign a WATS line to the required trunk 
route.•  YY = 00 
(1)  Trunk Route No. (00-63)(05) 
(2)  02: WATS lineCM35 START
END 

ND-45670 (E) CHAPTER 2
Page 299
Revision 2.0
MULTILINE TERMINAL ATTENDANT POSITION
PROGRAMMING
DESCRIPTION DATA
Assign the Primary Extension number to the 
required LEN.(1) LEN (0000-0511) 
(2)  FX-FXXXX (Primary Extension No.) 
Assign the Class of Service for the Multiline 
Terminal Attendant Position to the required 
Multiline Terminal. 
Note:The Service Restriction Class Number
for the Multiline Terminal Attendant Po-
sition should be different from an ordi-
nary station. 
•  CM12 YY = 02 
Service...