NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Page 348 Addendum-002
Revision 2.2 JANUARY, 1999
CME5
COMMAND CODE
TITLE:
STATION, TRUNK LINE MAKE BUSY
E5
4. DATA TABLE:
Note 1:For a station that is made busy, call termination to the station is restricted, but Call origination is available.
For extension lines on a Multiline Terminal, My Line and Multiline make busy can be set individually, with
the same condition as mentioned above.
Note 2:For a trunk that is made busy, the outgoing call is restricted, but on incoming, the call...

ND-45669 (E) CHAPTER 3
Addendum-002 Page 349
JANUARY, 1999 Revision 2.2
CME6
COMMAND CODE
TITLE:
CALL FORWARDING SET/RESET FROM MAT/CAT
E6
4. DATA TABLE:
Note:To reset Call Forwarding, assign “CCC” to the second data.
1. FUNCTION:
This command sets/resets the Call Forwarding service to each station from a MAT/CAT.
2. PRECAUTION:
CME6 can be used for any station irrespective of its state.
3. ASSIGNMENT PROCEDURE:
 + E6YY +   +  +   +   + 
YY MEANING DESTINATION No.
00 Call Forwarding-All Calls •...

CHAPTER 3 ND-45669 (E)
Pag e 3 50
Revision 2.0
CME7
COMMAND CODE
TITLE:
PASSWORD LEVEL
E7
4. DATA TABLE:
Note:In case of YY = 20, 21, the data to be set is “1” only.
1. FUNCTION:
This command specifies the accessible commands for each Password Level.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
YY
COMMAND CODE SETTING DATA
No. PASSWORD LEVEL
00
01
02
03
04
05
06
10
11
12
13
14
15
16Password Level 0 – 6
1 – 6
2 – 6
3 – 6
4 – 6
5 – 6
6
0
1
2
3
4
5
6XX: 00 – FF
(Exclusive of 03, E7, E9)0:...

ND-45669 (E) CHAPTER 3
Pag e 3 51
Revision 2.0
CME9
COMMAND CODE
TITLE:
PASSWORD CODE
E9
MAT
4. DATA TABLE:
Note:Password Level 7 can access all the commands.
1. FUNCTION:
This command is used to define the Password Code of each Password Level and the availability of Pass-
word Service.
2. PRECAUTION:
(1) Before setting the Password code, Function Number 8 (Change of Password) must be set to 0
(Allowed).
(2) When programming a Password Code, the Password Code for Password Level 7 must be made. If
no...

CHAPTER 3  ND-45669  (E)
C M EA
M AT
1.  FUN CTIO N:
ST  +   E AY   +   DE  +
[ C M EA ]  Fau lt  I nf orm ation  Store /D isp lay F unct io n s 

ND-45669  (E)   CHAPTER 3
CM EA
MAT
: I n it ial Data
~ 

CHAPTER 3  ND-45669  (E)
C M EA
M AT
2  Regis tr atio n  of  fau lt 
~ 

ND-45669 (E) CHAPTER 3
Pag e 3 55
Revision 2.0
CMEA
COMMAND CODE
TITLE:
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
EA
MAT
n  
Fault Information Display
After the following operation:
              
The first screen displays on the MAT/CAT. The fault information is separated into four separate parts,
and displayed on four screens. An example of fault information display is provided below:
EXPLANATION OF SCREEN INFORMATION
1: Fault Occurrence Kind No./Fault Restoration Kind No.
FAULT KIND 
NUMBERFAULT...

CHAPTER 3 ND-45669 (E)
Pag e 3 56
Revision 2.0
CMEA
COMMAND CODE
TITLE:
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
EA
MAT
EXPLANATION OF SCREEN INFORMATION (Continued)
2: External Alarm Kind (MJ/MN/-)
Use of External Alarm Kind - Minor (MN), Major (MJ) or external alarm is not provided (-) can be
programmed by CMEA Y=2. The following table shows the standard data set by the 2nd data = 3 of
CMEA Y=2.
FAULT RESTORATION 
KIND NUMBERFAULT RESTORATION CONTENT
18 FP/AP package returned to normal condition
19...

ND-45669 (E) CHAPTER 3
Pag e 3 57
Revision 2.0
CMEA
COMMAND CODE
TITLE:
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
EA
MAT
EXPLANATION OF SCREEN INFORMATION (Continued)
3: 
CPU Kind and FP/AP number for which a fault was detected
4:  Date and Time of Fault Occurrence and Restoration
5-12: Fault-Related Information/Fault Restoration-Related Information
INDICATION MEANING
MP 00 MP
FP 00 - 03 FP Number 0 - 3
AP 04 - 15 AP Card Number 4 - 15
FAU LT  
KIND 
NUMBER56789101112
01 Initial 
Kind, etc 
1 ,  2System...