NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 3 28
Revision 2.0
CMB0
COMMAND CODE
TITLE:
PEG COUNT
B0
MAT
1. FUNCTION:
This command allows accumulated data of use for maintenance purposes to be read from the system
PEG counter. Data can be cleared after reading.
2. PRECAUTION:
(1) When the system is reset, the contents in the memories of the PEG counter are all cleared.
(2) This command is included in MAT mode menu “D1” (Peg Count [COM03]).
3. ASSIGNMENT PROCEDURE:
Y=0
• To clear individual data
• To clear all PEG COUNT...

ND-45669 (E) CHAPTER 3
Pag e 3 29
Revision 2.0
CMB0
COMMAND CODE
TITLE:
PEG COUNT
B0
MAT
4. DATA TABLE:
YTRUNK STATUS DATA
ASSIGNMENT
DATA
DATA M EAN ING
0 000
063
(OG Call)The number of Outgoing seizures-trunk route 00 – 63 CCC
(For 0 CLEAR)
064
(Tandem 
Conn.)The number of tandem connections established
065
(STA busy)The number of times a busy station was encountered
066
(ATT Call)The number of all types of calls to the ATTCON(s)
068
(DT sending)The number of connections giving Dial Tone
069
(STA to...

CHAPTER 3 ND-45669 (E)
Pag e 3 30
Revision 2.0
CMB0
COMMAND CODE
TITLE:
PEG COUNT
B0
MAT
0 500
563
(ICBT Conn.)The number of incoming calls terminated to busy tone-Trunk 
Route 00–63CCC
(For 0 CLEAR)
600
663
(IC no answer)The number of unanswered incoming calls-Trunk Route 00–63
700
763
(ORT Conn.)The number of register connections on trunk call-Trunk 
Route 00–63
830
(Used busy)The number of conference calls (Three/Four way Calling)
831
(CFT busy)The number of failures cased by all conference trunks...

ND-45669 (E) CHAPTER 3
Pag e 3 31
Revision 2.0
CMB0
COMMAND CODE
TITLE:
PEG COUNT
B0
MAT
4. DATA TABLE:
Y1ST DATA SETTING DATA
DATA MEANING DATA MEANING
2
Setting of 
duration for 
measuring PEG 
COUNT0
(Measurement 
Start Time)Setting of PEG COUNT 
Start TimeXXXXXXXX
To stop the PEG 
COUNT immediate-
ly, enter 99999999XX
 XX XX XX
Min.
(00-59)
Hour
(00-23)
Day
(01-31)
Month
(01-12) 1
(Measurement 
End Time)Setting of PEG COUNT 
End Time
2
(Status)For displaying the PEG 
COUNT Status
Note
Note:The...

CHAPTER 3 ND-45669 (E)
Pag e 3 32
Revision 2.0
CMB1
COMMAND CODE
TITLE:
TRAFFIC MEASUREMENT
B1
4. DATA TABLE:
1. FUNCTION:
This command is used to measure traffic data of outgoing/incoming trunk calls and to display the data on
CAT or MAT.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
0 Setting condition
of traffic measurement0 Traffic Measure-
ment Mode0
1
2Not to measurement
Hourly measurement
Daily measurement
1...

ND-45669 (E) CHAPTER 3
Pag e 3 33
Revision 2.0
CMB1
COMMAND CODE
TITLE:
TRAFFIC MEASUREMENT
B1
0 Setting condition
of traffic measurement3 Display data for 
Traffic Measure-
ment0
1
2Before the traffic measure-
ment 
During the traffic measure-
ment
Completed the traffic mea-
surement
1 Displaying incoming 
trunk traffic data000
127Trunk No. 000
Trunk No. 1271
7XXXX
(4 digits)Incoming 
trunk traffic 
data
2 Displaying outgoing 
trunk traffic data000
127Trunk No. 000
Trunk No. 1271
7XXXX
(4...

CHAPTER 3 ND-45669 (E)
Pag e 3 34
Revision 2.0
CMB3
COMMAND CODE
TITLE:
UCD PEG COUNT
B3
MAT
1. FUNCTION:
This command allows accumulated traffic data related to the UCD Group to be read from the system.
2. PRECAUTION:
This command is included in MAT mode menu “D1” (Peg Count [COM03]).
3. ASSIGNMENT PROCEDURE:
• To display
• To clear individual data
• To clear all UCD PEG COUNT data
ST  +  B3Y  +  DE  +DATA
(1 - 4 digits)+  DE
ST  +  B3Y  +  DE  +  TRUNK STATUS DATA  +  DE  +  CCC  +  EXE
ST  +  B39  +...

ND-45669 (E) CHAPTER 3
Pag e 3 35
Revision 2.0
CMB3
COMMAND CODE
TITLE:
UCD PEG COUNT
B3
MAT
4. DATA TABLE:
Y SETTING DATA
TRUNK STATUS 
DATAMEANING DATA MEANING
0
(ANS)The number of answered calls on the UCD 
stationX
XXXXUCD Station Number (CM17 Y=0)
1
(IC Call)The number of incoming calls to the UCD 
Group00
15UCD Group 00
UCD Group 15
2
(Wait)The number of call waiting calls for a pre-
determined time in queuing mode on the 
UCD Group
Note:The predetermined time is speci-
fied by CM41 Y=0 Function...

CHAPTER 3  ND-45669  (E)
C M D5
4.  DAT A TABL E:
1.  FUN CTIO N:
 X X
2nd
00 : N o Ch ec k  C ode
S T   +   D5Y   +   D E  +
~ 

ND-45669  (E)   CHAPTER 3
CM D5
Note  1 : Acco rd ing to  the d igi ts  t o b e d esig nat ed , a ssign 01 FF  to  t h e 1 st Data 0 a nd 1  re spe ctiv ely . Di gits
3   ID  Cod e E nt ry   X
~
x1 x2 x3 x4 x6 x7 x8
0/ 1: Not to b e tot alled /T o be t ota ll e d