NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 3 38
Revision 2.0
CMD6
COMMAND CODE
TITLE:
ID CODE ALL CLEAR WITH AP
D6
1. FUNCTION:
This command is used for deleting all the ID Codes stored in the PN-AP01 card, at one time.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
ST + D60 + DE  + 0000 + DE + CCC + EXE
[CMD6] ID Code All Clear With AP 

ND-45669  (E)   CHAPTER 3
CM D7
4.  DAT A TABL E:
1.  FUN CTIO N:
ST   +   D7 Y  +   DE  +
~
~
~
~
~~
~
~~ 

CHAPTER 3  ND-45669  (E)
C M D7
4  Ass ig n m ent of t he  m axi-
~
~
~
~
~
~
AP  INI TIAL
~
~ 

ND-45669 (E) CHAPTER 3
Pag e 3 41
Revision 2.0
CMD7
COMMAND CODE
TITLE:
OAI CONTROL DATA
D7
Note 1:OAI Function key number is assigned by CM90.
Note 2:The digit code is assigned by CMD7 Y = 6.
Note 3:The maximum number of operation codes is 16.
Note 4:Digit number is assigned by CMD7 Y = 0.
Note 5:Do not use * as a digit code.
Note 6:The maximum number of operation codes is 128. 

CHAPTER 3 ND-45669 (E)
Pag e 3 42
Revision 2.0
CMD9
COMMAND CODE
TITLE:
CENTRALIZED BILLING DATA PORT ASSIGNMENT
D9
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the data port for sending billing information to a Centralized Office.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
YY 1ST DATA2ND DATA
RELATED
COMMAND
DATA MEANING
00 03 03 Centralized Billing data port assignment CMA7 YY = 03, 04
CM08-378
STEXE ++ + ++
D9YYDE1ST DATA
+DE2ND DATA
(2 digits) (2 digits)
[CMD9] Centralized Billing...

ND-45669  (E)   CHAPTER 3
CM DB
4.  DATA  T A BLE:
1.  FUN CTIO N:
STDEDEEX E
+ +
D BYY   +  +  +  +
[CMDB]  Call in g Num ber Develo pment Data 

CHAPTER 3 ND-45669 (E)
Pag e 3 44
Revision 2.0
CMDB
COMMAND CODE
TITLE:
CALLING NUMBER DEVELOPMENT DATA
DB
04 Ringing Tone 0-1499 Calling Number 
Development Table 
Number assigned by 
CMDC0
1
2
3Depends on CM35 YY=33
Not used
Internal Ringing Tone
External Ringing Tone
05 Calling Number/ 
Calling Name Display0
1Calling Number Display
Calling Name Display
06 Call Waiting for each calling 
number0
1Not available
Available
07 UCD Priority Queuing for 
each calling number0 Not priority
Priority
12 Priority...

ND-45669 (E) CHAPTER 3
Pag e 3 45
Revision 2.0
CMDB
COMMAND CODE
TITLE:
CALLING NUMBER DEVELOPMENT DATA
DB
Note 1:If assigning the destination station number as below, the Terminating System overrrides CM30
YY=02/03 for the selected Development Table.
****02 : Trunk Line Appearance
****03 : Trunk Line Appearance + TAS
****04 : Direct-in Termination
****09 : Automated Attendant
****11 : ATTCON + Trunk Line Appearance
****13 : TAS
****14 : Termination to ATTCON
****16 : Direct Inward System Access (DISA)...

CHAPTER 3 ND-45669 (E)
Pag e 3 46
Revision 2.0
CMDC
COMMAND CODE
TITLE:
CALLING NUMBER DEVELOPMENT TABLE
DC
4. DATA TABLE:
1. FUNCTION:
This command is used to assign the calling number development table number for CALLER ID, to each
calling number.
2. PRECAUTION:
Clearing all data in memory for calling number development (CMDB YY=90) is necessary before
assigning the calling number development data by CMDB and CMDC.
The development data by CMDB and CMDC are assigned toward the first CIR card (PN-4RSTC),...

ND-45669 (E) CHAPTER 3
Pag e 3 47
Revision 2.0
CME0
COMMAND CODE
TITLE:
INITIALIZATION
E0
4. DATA TABLE:
Note:For the Data “MMDDHHMM”, enter the Month, Date, and Time (hour and minute) of the time, as shown below.
MM : Month (01 (Jan.) – 12 (Dec.)) 
DD : Date (01 – 31)
HH : Hour (00 – 24)
MM : Minute (00 – 59)
1. FUNCTION:
This command allows the maintenance personnel to reset the system with the CAT.
2. PRECAUTION:
If the setting data (Month, Day and Time) is different from the current time of the...