NEC Neax2000 Ivs Command Manual

CHAPTER 3 ND-45669 (E)
Pag e 3 22
Revision 2.0
CMA8
COMMAND CODE
TITLE:
CCIS ROUTING LABEL ASSIGNMENT
A8
4. DATA TABLE:
1. FUNCTION:
This command is used to assign a destination office for a message to be transferred (e.g. service informa-
tion) and the Common Channel Handler (CCH) which will accommodate the message.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
1S T DATA 2ND DATA
RELATED
COMMAND
DATA MEANING DATA MEANING
00001
16367
NoteDestination Point Code (DPC) 
sent from distant...

ND-45669 (E) CHAPTER 3
Pag e 3 23
Revision 2.0
CMA9
COMMAND CODE
TITLE:
ISDN D-CHANNEL ASSIGNMENT
A9
INITIALMAT
4. DATA TABLE:
1. FUNCTION:
This command is used to assign various data to each D-Channel Handler (DCH) for ISDN-Primary Rate
Access.
2. PRECAUTION:
This command requires a system reset after data setting.
3. ASSIGNMENT PROCEDURE:
1S T DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING
00 Assignment of trunk used as 
D-Channel000
255Trunk Number assigned by CM07 
YY = 01CM07 YY= 01
ST   +...

CHAPTER 3 ND-45669 (E)
Page 324 Addendum-001
Revision 2.1 AUGUST, 1998
CMAA
COMMAND CODE
TITLE:
DTI/DCH/CIR CARD FUNCTIONS
AA
4 . D ATA  TA B L E :
Note 1:This data is effective only when CMAA YY=01 is set to 0 (12-Multi Frame).
Note 2:NI-1 is supported on the BRT card only.
1. FUNCTION:
This command assigns functions to DTI, BRI and DCH card.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
  +AAYY+    +   +   + 
: Initial Data
YY SETTING DATA
RELATED 
COMMAND
No. MEANING DATA MEANING
00 Data Mode
(for...

ND-45669 (E) CHAPTER 3
Pag e 3 25
Revision 2.0
CMAC
COMMAND CODE
TITLE:
ISDN FUNCTIONS
AC
INITIAL
4. DATA TABLE:
1. FUNCTION:
This command assigns the functions to the ICH/BRI card.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
 + ACYY +   +   +  +   +   + 
 + ACYY +   +   +  +   +   +  + 
: Initial Data
YY SETTING DATA
RELATED 
COMMAND
No. MEANING DATA MEANING
00 Assignment of the ISDN Circuit Sta-
tion Number to be controlledX
XXXXISDN Circuit Station No.
01 Assignment of the Layer 2 data link 0
1Point...

CHAPTER 3 ND-45669 (E)
Page 326 Addendum-001
Revision 2.1 AUGUST, 1998
CMAD
COMMAND CODE
TITLE:
ZT CALLING AREA/PAD DATA ASSIGNMENT
AD
4 . D ATA  TA B L E :
1. FUNCTION:
This command assigns the calling area and PAD data for each ZT.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
 + ADYY +   +   +   +   + 
: Initial Data
YY MEANING ZT No.SETTING DATA
DATA MEANING
00 Calling Area 000-255 XX
 X XX
Group ZT No. (00 – 31)
Group No. (0 – 7)
Calling Area No. (00 –31)
01 PAD Data
(CSI-COT/ODT/DID)PA D
00
01
02...

ND-45669 (E) CHAPTER 3
Addendum-001 Page 327
AUGUST, 1998 Revision 2.1
CMAE
COMMAND CODE
TITLE:
ZT OPERATION DATA ASSIGNMENT
AE
4. DATA TABLE:
1. FUNCTION:
This command is used for assigning the ZT Operation data.
2. PRECAUTION:
None
3. ASSIGNMENT PROCEDURE:
: Initial Data
YY MEANING1S T DATA S E TT ING  DATA
DATA MEANING DATA MEANING
00 Nation Code 03 Nation Code Assign-
ment003
004
005
006
007
008
009
255North America 310
North America 311
North America 312
North America 313
North America 314
North...

CHAPTER 3 ND-45669 (E)
Page 327-1 Addendum-001
Revision 2.1 AUGUST, 1998
CMAE
COMMAND CODE
TITLE:
ZT OPERATION DATA ASSIGNMENT
AE
: Initial Data
YY MEANING1S T DATA S E TT ING  DATA
DATA MEANING DATA MEANING
42 Network ID (for 
Roaming Service)00 Network ID Assign-
ment00000-65534
NONENetwork ID
INITIAL 

ND-45669 (E) CHAPTER 3
Addendum-002 Page 327-2
JANUARY, 1999 Revision 2.2
CMAF
COMMAND CODE
TITLE:
VISITOR PS DATA ASSIGNMENT
AF
MAT
4. DATA TABLE:
1. FUNCTION:
This command assigns the Visitor PS data.
2. PRECAUTION:
This data setting is valid when DBM (AP00) card is online.
3. ASSIGNMENT PROCEDURE:
: Initial Data
Y Y Y 1S T DATA 2ND DATA
No. MEANING DATA MEANING DATA MEANING
000 Assignment of Home 
PBX ID for Visitor PSX-XXXXXXX Home PBX ID
(1-7 digits, Decimal)000-255
CCC
NONEData Table No. 000-255...

CHAPTER 3 ND-45669 (E)
Page 327-3 Addendum-001
Revision 2.1 AUGUST, 1998
CMAF
COMMAND CODE
TITLE:
VISITOR PS DATA ASSIGNMENT
AF
MAT
208 Route Selection Pattern 
Number for the Trunk 
Restriction Class sent 
from the Home PBX00
15Trunk Restriction Class 
sent from Home PBX
01: Unrestricted (RCA)
02: Nonrestricted 1 (RCB)
03: Nonrestricted 2 (RCC)
04: Semirestricted 1/2 
(RCD/RCE)
05: Restricted 1/2 (RCF/
RCG)
06: Fully restricted (RCH)
07-15 Not used00 Route Selection Pattern 
00
210 Roaming Station...

THIS PAGE INTENTIONALLY LEFT BLANK.
ND-45669 (E) CHAPTER 3
Addendum-001 Page 327-4
AUGUST, 1998 Revision 2.1
This page is for your notes.